Engine
Base Power (all gears) Net	138 hp
Engine Model	Cat® C6.6 ACERT
Displacement	403 in3
Bore	4.13 in
Stroke	4.92 in
Speed @ rated power	2000 RPM
Number of cylinders	6
Derating altitude	11500 ft
Std - Fan speed - max	1150 RPM
Std - Fan speed - min	550 RPM
Std - Ambient Capability	109 ° F
Hi Ambient - Fan speed - max	1650 RPM
Hi Ambient - Fan speed - min	550 RPM
Hi Ambient Capability	122 ° F
Power Train
Forward/Reverse Gears	8 Fwd / 6 Rev
Transmission	Direct drive, power shift, countershaft
Brakes - Service	Multiple oil-disc
Brakes - Service, surface area	3565 in2
Brakes - Parking	Multiple oil disc
Brakes - Secondary	Dual circuit control system
All-Wheel Drive System (Optional)
Motor Type	2 Infinitely variable axial piston
Pump Type	2 Variable piston
Torque - max	10325 ft-lb
Operational Gears - forward	1 - 7
Operational Gears - reverse	1 - 5
Hydraulic System
Circuit type	Electro-hydraulic load sensing, closed center
Pump type	Variable piston
Pump output	40 gal/min
Maximum system pressure	3500 psi
Standby Pressure	450 psi
Operating Specifications
Top Speed - Fwd.	27.7 mph
Top Speed - Rev.	23.5 mph
Turning radius, outside front tires	24.5 ft
Steering range - left/right	47.5°
Articulation angle - left/right	20°
Fwd. 1st	2.4 mph
Fwd. 2nd	3.3 mph
Fwd. 3rd	4.75 mph
Fwd. 4th	6.5 mph
Fwd. 5th	10.2 mph
Fwd. 6th	13.8 mph
Fwd. 7th	19 mph
Fwd. 8th	27.7 mph
Rev. 1st	2 mph
Rev. 2nd	3.8 mph
Rev. 3rd	5.6 mph
Rev. 4th	8.6 mph
Rev. 5th	16.1 mph
Rev. 6th	23.5 mph
Service Refill
Fuel Capacity	90 gal
Cooling system	8.7 gal
Hydraulic system - tank	16.9 gal
Engine Oil	3.7 gal
Trans./Diff./Final Drives	16.5 gal
Tandem housing (each)	15.6 gal
Front wheel spindle bearing housing	0.1 gal
Circle drive housing	1.8 gal
Frame
Drawbar - thickness	0.4 in
Drawbar - yoke bar thickness	0.75 in
Drawbar - width	3 in
Circle - diameter	60.2 in
Circle - blade beam thickness	1.4 in
Drawbar - height	6 in
Front axle - height to center	22.5 in
Front axle - wheel lean, left/right	18°
Front axle - total oscillation per side	32°
Tandems
Height	19.76 in
Width	6.76 in
Sidewall thickness - inner	0.5 in
Sidewall thickness - outer	0.6 in
Drive chain pitch	1.8 in
Wheel axle spacing	59.5 in
Tandem oscillation - front up	15°
Tandem oscillation - front down	25°
Moldboard
Blade width	12 ft
Moldboard - height	24 in
Moldboard - thickness	0.87 in
Arc radius	16.3 in
Throat clearance	4.9 in
Cutting edge - width	6 in
Cutting edge - thickness	0.6 in
End Bit - width	6 in
End Bit - thickness	0.6 in
Blade Pull - base GVW	20350 lb
Blade Pull - max GVW	24218 lb
Blade Pull - base GVW (AWD)	30603 lb
Blade Pull - max GVW (AWD)	35024 lb
Down Pressure - base GVW	16435 lb
Down Pressure - max GVW	29125 lb
Blade Range
Circle centershift - right	25.8 in
Circle centershift - left	25.8 in
Moldboard sideshift - right	26 in
Moldboard sideshift - left	20.1 in
Maximum blade position angle	90°
Blade tip range - forward	40°
Blade tip range - backward	5°
Maximum shoulder reach outside of tires - rig	75 in
Maximum shoulder reach outside of tires - lef	68.6 in
Maximum lift above ground	16.8 in
Maximum depth of cut	28.3 in
Ripper
Ripping depth, maximum	17 in
Ripper shank holder spacing	21 in
Ripper shank holders	5
Penetration force	17705 lb
Pryout force	26303 lb
Machine length increase, beam raised	39.2 in
Scarifier
Rear: Working width	91 in
Rear: Scarifier shank holders	9
Rear: Scarifier shank holder spacing	10.5 in
Weights
Gross Vehicle Weight - base	31891 lb
Gross Vehicle Weight, max	44690 lb
Gross Vehicle Wt, max - front axle	16446 lb
Gross Vehicle Wt, max - rear axle	28244 lb
Gross Vehicle Wt, base - front axle	9280 lb
Gross Vehicle Wt, base - rear axle	22611 lb
Dimensions
Height - top of cab	129 in
Length - counterweight to ripper	389.3 in
Width - outside front tires	97.7 in
Length - front axle to mid tandem	232.8 in
Length - front tire to rear of machine	334.1 in
Length - front axle to moldboard	98.85 in
Length - between tandem axles	59.5 in
Width - outside rear tires	97.7 in
Width - tire center lines	84.1 in
Height - front axle center	22.5 in
Height to exhaust stack	112.4 in
Height to top of cylinders	113.7 in
Ground clearance at rear axle	13.6 in

OPERATOR ENVIRONMENT

Air Conditioner with heater

Arm and wrist rest, adjustable

Articulation, automatic Return-to-Center

Ashtray and lighter

Cat Messenger, operator information system

Centershift pin indicator

Coat hook

Cup holder

Display, digital speed and gear

Doors, left and right side with wiper

Gauge cluster - articulation, engine coolant temp,

engine RPM, fuel, system voltage

Gauge, machine level

Hour meter, digital

Joystick hydraulic controls

implements, steering, transmission

Ladders, cab, left and right side

Lights, night time cab

Mirror, inside rearview, wide angle

Power port, 12V

Radio Ready, Entertainment

ROPS cab, sound suppressed

Seat belt, retractable 76 mm (3 in)

Seat, cloth-covered, comfort suspension

Storage area for cooler/lunchbox

Throttle control, electronic

Windows, laminated glass:

fixed front with intermittent wiper

side and rear (3)

POWER TRAIN

Air cleaner, dual stage, dry type, automatic dust ejector,

service indicator through Cat Messenger

Air-to-air after cooler (ATAAC)

Belt, serpentine, automatic tensioner

Brakes, four-wheel hydraulic

Differential, lock / unlock

Drain, engine oil, ecology

Electronic over speed protection

Engine, Cat® C6.6 with ACERT

Fuel-water separator

Hydraulic demand fan

Muffler, under hood

Parking brake - multi-disc, sealed, oil-cooled

Priming pump, fuel

Rear axle, modular

Sediment drain, fuel tank

Transmission, 8F/6R, power shift, direct drive

VHP (Variable Horsepower)

VHP Plus (Variable Horsepower Plus)

ELECTRICAL

Alarm, back up

Alternator, 80 ampere, sealed

Batteries, maintenance free, heavy duty 1125 CCA

Breaker panel, ground accessible

Electrical system, 24V

Grade Control Ready - Cab harness, software,

electrical hydraulic valves, bosses and brackets

Lights, reversing

Lights, roading, roof-mounted

Lights, stop and tail, LED

Product Link Ready

Starter, electric

OTHER STANDARD EQUIPMENT

Brake accumulators, dual certified

Bumper, rear, integrated with hitch

CD ROM Parts Book

Clutch, circle drive slip

Cutting edges

curved DH-2 steel

152 mm x 16 mm (6 in x 5/8 in)

19 mm (3/4 in) mounting bolts

Doors (3), engine compartment, locking

Drawbar - 4 shoes with replaceable wear strips

Endbits

16 mm (5/8 in) DH-2 steel

19 mm (3/4 in) mounting bolts

Extended Life Coolant to -35° C (-30° F)

Fluid check, ground level

Frame, articulated, with safety lock

Fuel tank, ground level access

Ground level engine shutdown

Hammer (emergency exit)

Horn, electric

Hydraulics, base 8 implement controls

Hydraulics, load-sensing

Lockout, hydraulic implement for roading

Moldboard

3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in)

hydraulic sideshift and tip

Mounting, cab roof accessories

Pump, hydraulic, high capacity (99cc/6 in3)

Paint, glare reducing - top of front frame

and rear enclosure

Radiator cleanout access

Secondary steering

Serviceability, LH side

Tandem walkway/guards

Tool box

Tow hitch

TIRES, RIMS, & WHEELS

Partial allowance for tires and multi-piece rims

ELECTRICAL kg lb

Alternator, 150 ampere 2 5

Batteries:

extreme duty, 1400 CCA 44 96

heavy duty, 1125 CCA 44 96

Converter, communication (CB) 5 11

Lights:

5 Lighting Arrangements, including rear roading, drop down

Warning, LED strobe 1 2

GUARDS

covers, screen 4 9

debris 9 20

Transmission Sides/Sound 76 167

transmission 133 293

OPERATOR ENVIRONMENT

Fan, defroster, rear window 2 4

Mirrors, outside:

heated 24V 15 33

mounted 10 22

Seat, air suspension, cloth 2 5

Shade, sun 2 5

Wiper, each side 0 1

Wiper/washer, rear 0 1

POWER TRAIN

All Wheel Drive 590 1300

Engine, variable horsepower plus (VHP Plus)

Precleaner, Sy-Klone 9 20

Transmission, autoshift 2 5

OTHER ATTACHMENTS kg lb

AccuGrade ARO 41 90

Accumulators, blade lift 77 170

AutoLube, Lincoln 23 50

AutoLube, Lincoln, ripper enhancement 5 10

Camera, rearview 9 20

Caterpillar Product Link 321SR 5 10

Compressor/tank, Air 23 50

Fenders, front, AWD 56 124

Fenders, rear 119 262

Heater, engine coolant:

120V 0.5 1

240V 1 3

Hydraulic arrangements with one or more additional

hydraulic valves are available for rear ripper, dozer,

snow plow and snow wing.

Security system 2 5

Snow wing mounting, frame ready 91 200

Starting aid, Ether .5 1

WORK TOOLS / G.E.T.

Blade extension, 610 mm (2 ft)

Left Hand 113 250

Cutting Edges, curved 43 95

Drawbar, 6 shoe circle guide 22.7 50

Endbits, overlay 24 52

Front Lift Group, Manual 680 1500

Mid Mount Scarifier 939 2071

Moldboard

4267 mm x 610 mm x 22 mm (14 ft x 24 in x 7/8 in)

4267 mm x 686 mm x 25 mm (14 ft x 27 in x 1 in)

Push plate, counterweight 885 1950

Ripper/Scarifier, Rear 998 2200

Ripper tooth 30 67

Scarifier, front 434 956

Scarifier, Tooth 69 152

MACHINE ARRANGEMENTS

Canadian Arrangement

European Arrangement

Roading Arrangement, European

Snow Arrangement

Note: Not all attachments are available in all regions.

ELECTRICAL kg lb

Alternator, 150 ampere 2 5

Batteries:

extreme duty, 1400 CCA 44 96

heavy duty, 1125 CCA 44 96

Converter, communication (CB) 5 11

Lights:

5 Lighting Arrangements, including rear roading, drop down

Warning, LED strobe 1 2

GUARDS

covers, screen 4 9

debris 9 20

Transmission Sides/Sound 76 167

transmission 133 293

OPERATOR ENVIRONMENT

Fan, defroster, rear window 2 4

Mirrors, outside:

heated 24V 15 33

mounted 10 22

Seat, air suspension, cloth 2 5

Shade, sun 2 5

Wiper, each side 0 1

Wiper/washer, rear 0 1

POWER TRAIN

All Wheel Drive 590 1300

Engine, variable horsepower plus (VHP Plus)

Precleaner, Sy-Klone 9 20

Transmission, autoshift 2 5

OTHER ATTACHMENTS kg lb

AccuGrade ARO 41 90

Accumulators, blade lift 77 170

AutoLube, Lincoln 23 50

AutoLube, Lincoln, ripper enhancement 5 10

Camera, rearview 9 20

Caterpillar Product Link 321SR 5 10

Compressor/tank, Air 23 50

Fenders, front, AWD 56 124

Fenders, rear 119 262

Heater, engine coolant:

120V 0.5 1

240V 1 3

Hydraulic arrangements with one or more additional

hydraulic valves are available for rear ripper, dozer,

snow plow and snow wing.

Security system 2 5

Snow wing mounting, frame ready 91 200

Starting aid, Ether .5 1

WORK TOOLS / G.E.T.

Blade extension, 610 mm (2 ft)

Left Hand 113 250

Cutting Edges, curved 43 95

Drawbar, 6 shoe circle guide 22.7 50

Endbits, overlay 24 52

Front Lift Group, Manual 680 1500

Mid Mount Scarifier 939 2071

Moldboard

4267 mm x 610 mm x 22 mm (14 ft x 24 in x 7/8 in)

4267 mm x 686 mm x 25 mm (14 ft x 27 in x 1 in)

Push plate, counterweight 885 1950

Ripper/Scarifier, Rear 998 2200

Ripper tooth 30 67

Scarifier, front 434 956

Scarifier, Tooth 69 152

MACHINE ARRANGEMENTS

Canadian Arrangement

European Arrangement

Roading Arrangement, European

Snow Arrangement

Note: Not all attachments are available in all regions.