The 14M motor grader represents a revolution in operational efficiency, visibility, service ease and overall productivity, setting the new standard and building on the legacy of high quality you can trust.

Engine
Base Power (all gears) Net	259 hp
VHP - gears 4-8 Net	273.57 hp
Engine Model	Cat® C11 ACERT
Displacement	677 in3
Bore	5.1 in
Stroke	5.5 in
Speed @ rated power	1800 RPM
Number of cylinders	6
Derating altitude	13000 ft
Std - Fan speed - max	1450 RPM
Std - Fan speed - min	550 RPM
Std - Ambient Capability	109 ° F
Hi Ambient - Fan speed - max	1650 RPM
Hi Ambient - Fan speed - min	550 RPM
Hi Ambient Capability	122 ° F
Power Train
Forward/Reverse Gears	8 Fwd / 6 Rev
Transmission	Direct drive, power shift, Countershaft
Brakes - Service	oil-actuated, oil-disc
Brakes - Service, surface area	5347 in2
Brakes - Parking	Spring applied, hydraulically released
Brakes - Secondary	Oil-actuated, oil-disc
Hydraulic System
Circuit type	Electro-hydraulic load sensing, closed center
Pump type	Variable displacement
Pump output	74 gal/min
Maximum system pressure	3500 psi
Standby Pressure	450 psi
Operating Specifications
Top Speed - Fwd.	31 mph
Top Speed - Rev.	24.5 mph
Turning radius, outside front tires	25.9 ft
Steering range - left/right	47.5°
Articulation angle - left/right	20°
Fwd. 1st	2.7 mph
Fwd. 2nd	3.7 mph
Fwd. 3rd	5.3 mph
Fwd. 4th	7.3 mph
Fwd. 5th	11.4 mph
Fwd. 6th	15.4 mph
Fwd. 7th	21.3 mph
Fwd. 8th	31 mph
Rev. 1st	2.1 mph
Rev. 2nd	4 mph
Rev. 3rd	5.8 mph
Rev. 4th	9 mph
Rev. 5th	16.9 mph
Rev. 6th	24.5 mph
Service Refill
Fuel Capacity	130 gal
Cooling system	12.3 gal
Hydraulic system - tank	15.9 gal
Engine Oil	7.9 gal
Trans./Diff./Final Drives	23.5 gal
Tandem housing (each)	25.5 gal
Front wheel spindle bearing housing	0.24 gal
Circle drive housing	1.6 gal
Frame
Drawbar - width	3 in
Circle - diameter	71.75 in
Circle - blade beam thickness	2 in
Drawbar - height	8 in
Front axle - height to center	25.2 in
Front axle - wheel lean, left/right	17.1°
Front axle - total oscillation per side	32.0°
Tandems
Height	24.25 in
Width	8.4 in
Sidewall thickness - inner	0.8 in
Sidewall thickness - outer	0.8 in
Drive chain pitch	2.24 in
Wheel axle spacing	65 in
Tandem oscillation - front up	15°
Tandem oscillation - front down	25°
Moldboard
Blade width	14 ft
Moldboard - height	27 in
Moldboard - thickness	1 in
Arc radius	16.3 in
Throat clearance	4.6 in
Cutting edge - width	8 in
Cutting edge - thickness	0.6 in
End Bit - width	6 in
End Bit - thickness	0.6 in
Blade Pull - base GVW	30829 lb
Blade Pull - max GVW	39619 lb
Down Pressure - base GVW	22130 lb
Down Pressure - max GVW	38781 lb
Blade Range
Circle centershift - right	20.5 in
Circle centershift - left	25.5 in
Moldboard sideshift - right	31.1 in
Moldboard sideshift - left	29.1 in
Maximum blade position angle	65°
Blade tip range - forward	40°
Blade tip range - backward	5°
Maximum shoulder reach outside of tires - rig	89.7 in
Maximum shoulder reach outside of tires - lef	85.4 in
Maximum lift above ground	16.5 in
Maximum depth of cut	17.3 in
Ripper
Ripping depth, maximum	15.8 in
Ripper shank holders	7
Shank holder spacing - min	15 in
Shank holder spacing - max	19 in
Penetration force	27222 lb
Pryout force	28146 lb
Machine length increase, beam raised	45.5 in
Weights
Gross Vehicle Weight - base	46796 lb
Gross Vehicle Weight, max	65998 lb
Gross Vehicle Wt, max - front axle	9969 lb
Gross Vehicle Wt, max - rear axle	44021 lb
Gross Vehicle Wt, base - front axle	12541 lb
Gross Vehicle Wt, base - rear axle	34255 lb
Dimensions
Height - top of cab	139.2 in
Length - counterweight to ripper	429 in
Width - outside front tires	109.9 in
Length - front axle to mid tandem	258 in
Length - front tire to rear of machine	370.6 in
Length - front axle to moldboard	112 in
Length - between tandem axles	65 in
Width - outside rear tires	109.9 in
Width - tire center lines	93 in
Height - front axle center	25.2 in
Height to exhaust stack	128.2 in
Height to top of cylinders	112.4 in
Ground clearance at rear axle	15.1 in

OPERATOR ENVIRONMENT

Accelerator

Air Conditioning with heater

Arm and wrist rest, adjustable

Articulation, automatic Return-to-Center

Ashtray and lighter

Cat Messenger, operator information system

Centershift pin indicator

Coat hook

Cup holder

Display, digital speed and gear

Doors, left and right side with wiper

Gauge, machine level

Gauge cluster (analog) inside the cab

Hour meter, digital

Joystick hydraulic controls

implements, steering, transmission

Lights, night time cab

Mirror, inside rearview, wide angle

Power port, 12V

Radio Ready, Entertainment

ROPS cab, sound suppressed

Seat, cloth-covered, comfort suspension

Seat belt, retractable 89 mm (3 in)

Storage area for cooler/lunchbox

Throttle control, electronic

Windows, laminated glass:

POWER TRAIN

Air cleaner, dual stage, dry type, automatic dust ejector,

service indicator through Cat Messenger

Air-to-air after cooler (ATAAC)

Belt, serpentine, automatic tensioner

Brakes, four-wheel hydraulic

Differential, lock / unlock

Drain, engine oil, ecology

Electronic over speed protection

Engine, Cat® C11 with ACERT

Ether starting aid

Fuel-water separator

Hydraulic demand fan

Muffler, under hood

Parking brake - multi-disc, sealed, oil-cooled

Priming pump, fuel

Rear axle, modular

Sediment drain, fuel tank

Transmission, 8F / 6R, power shift, direct drive

VHP (Variable Horsepower)

ELECTRICAL

Alarm, back up

Alternator, 80 ampere, sealed

Batteries, maintenance free, heavy duty, 1125 CCA

Breaker panel, ground accessible

Electrical system, 24V

Grade Control Ready

Lights, reversing

Lights, roading, roof-mounted

Lights, stop and tail, LED

Product Link Ready

OTHER STANDARD EQUIPMENT

Brake accumulators, dual certified

Bumper, rear, integrated with hitch

CD ROM Parts Book

Clutch, circle drive slip

Cutting edges

curved DH-2 steel

203 mm x 16 mm (8 in x 5/8 in)

19 mm (3/4 in) mounting bolts

Doors (3), engine compartment, locking

Drawbar - 6 shoe with replaceable wear strips

Endbits

16 mm (5/8 in) DH-2 steel

19 mm (3/4 in) mounting bolts

Extended Life Coolant to -35° C (-30° F)

Fluid check, ground level

Frame, articulated, with safety lock

Fuel tank, 130 gallon (492 L), ground level access

Guards, debris, underside

Guards, service center debris

Ground level engine shutdown

Hammer (emergency exit)

Horn, electric

Hydraulics, base 8 implement controls

Hydraulics, load-sensing

Lockout, hydraulic implement for roading

Moldboard

4287 mm x 686 mm x 25 mm (14 ft x 27 in x 1 in)

hydraulic sideshift and tip

Paint, glare reducing - top of front frame

and rear enclosure

Radiator cleanout access

Secondary steering

Serviceability, LH side

Tandem walkway/guards

Tool box

Tow hitch

TIRES, RIMS, & WHEELS

Partial allowance for tires and multi-piece rims

Note: Not all attachments are available in all regions.

ELECTRICAL kg lb

Alternator, 150 ampere 2 5

Batteries, extreme duty, 1400 CCA 14 30

Converter, communication (CB) 5 11

Lights:

5 Lighting Arrangements and Rear Roading, Drop Down

Warning, LED strobe 1 2

Starter, electric, heavy duty 10 21

GUARDS

covers, screen 4 9

transmission 156 344

sound 91 200

OPERATOR ENVIRONMENT

Fan, defroster, rear window 2 4

Horn, air 7 15

Mirrors, outside:

heated 24V 15 33

mounted 10 22

Precleaner, HVAC 5 10

Seat, air suspension, cloth 2 5

Shade, sun 2 5

Wiper, each side 0 1

Wiper/washer, rear 2 4

POWER TRAIN

Engine, variable horsepower plus (VHP Plus)

Fuel tank, fast fill 14 31

Precleaner, Sy-Klone 5 10

Transmission, autoshift 2 5

OTHER ATTACHMENTS kg lb

AccuGrade ARO 39 85

Accumulators, blade lift 71 156

AutoLube, Lincoln 23 50

AutoLube, Lincoln, ripper enhancement 5 10

Camera, rearview 27 60

Caterpillar Product Link 321SR 5 10

Compressor/tank, Air 23 50

Fenders, rear 184 405

Heater, engine coolant:

120V 1 3

240V 1 3

Hydraulic arrangements with one or more additional

hydraulic valves are available for rear ripper, dozer,

snow plow and snow wing.

Security system 2 5

Snow wing mounting, frame ready 91 200

Sound suppression 11 25

WORK TOOLS / G.E.T.

Blade/moldboard, 4877 mm x 686 mm x 25 mm

(16 ft x 27 in x 1 in) 136 299

Cutting Edges, curved 43 95

Push plate, counterweight 851 1875

Ripper, mounting 34 75

Ripper, rear 1552 3421

Ripper tooth 28 61

MACHINE ARRANGEMENTS

Canadian Arrangement

European Arrangement

Snow Arrangement

ELECTRICAL kg lb

Alternator, 150 ampere 2 5

Batteries, extreme duty, 1400 CCA 14 30

Converter, communication (CB) 5 11

Lights:

5 Lighting Arrangements and Rear Roading, Drop Down

Warning, LED strobe 1 2

Starter, electric, heavy duty 10 21

GUARDS

covers, screen 4 9

transmission 156 344

sound 91 200

OPERATOR ENVIRONMENT

Fan, defroster, rear window 2 4

Horn, air 7 15

Mirrors, outside:

heated 24V 15 33

mounted 10 22

Precleaner, HVAC 5 10

Seat, air suspension, cloth 2 5

Shade, sun 2 5

Wiper, each side 0 1

Wiper/washer, rear 2 4

POWER TRAIN

Engine, variable horsepower plus (VHP Plus)

Fuel tank, fast fill 14 31

Precleaner, Sy-Klone 5 10

Transmission, autoshift 2 5

OTHER ATTACHMENTS kg lb

AccuGrade ARO 39 85

Accumulators, blade lift 71 156

AutoLube, Lincoln 23 50

AutoLube, Lincoln, ripper enhancement 5 10

Camera, rearview 27 60

Caterpillar Product Link 321SR 5 10

Compressor/tank, Air 23 50

Fenders, rear 184 405

Heater, engine coolant:

120V 1 3

240V 1 3

Hydraulic arrangements with one or more additional

hydraulic valves are available for rear ripper, dozer,

snow plow and snow wing.

Security system 2 5

Snow wing mounting, frame ready 91 200

Sound suppression 11 25

WORK TOOLS / G.E.T.

Blade/moldboard, 4877 mm x 686 mm x 25 mm

(16 ft x 27 in x 1 in) 136 299

Cutting Edges, curved 43 95

Push plate, counterweight 851 1875

Ripper, mounting 34 75

Ripper, rear 1552 3421

Ripper tooth 28 61

MACHINE ARRANGEMENTS

Canadian Arrangement

European Arrangement

Snow Arrangement