More powerful engine, improved cooling system, longer track length, increased hydraulic pressure, and cab riser options lead to increased productivity and lower operating cost.

Engine
Engine Model	Cat® C7 ACERT
Net Flywheel Power	204 hp
Net Power - ISO 9249	204 hp
Net Power - SAE J1349	202 hp
Net Power - EEC 80/1269	204 hp
Bore	4.33 in
Stroke	5 in
Displacement	440 in3
Deration Altitude	7545.91 ft
Operating Specifications
Max. Reach	50.85 ft
Cab Riser - Fixed	6.42 ft
Cab Riser - Hydraulic	8.5 ft
Generator Set	27 hp
Hydraulic System
Maximum Flow (each of two pumps)	62 gal/min
Max. Pressure Implements	5076 psi
Max Pressure - Heavy Lift	5221 psi
Max. Pressure Travel	5076 psi
Max. Pressure - Swing	4192 psi
Pilot System Max. Flow	8.6 gal/min
Pilot System Max. Pressure	566 psi
Rotate Circuit for Grapple Max. Flow	15 gal/min
Rotate Circuit for Grapple Operating Pressure	2000 psi
Generator Auxiliary Pump Max Flow	42 gal/min
Rotate Circuit for Grapple Operating Pressure	15.06 gal/min
Generator Auxiliary Pump Max Pressure	2500 psi
Weights
Operating Weight	78321 lb
Upper	20269 lb
Counterweight	16980 lb
Undercarriage (includes carbody)	25137 lb
Two-Piece Front (with cylinders)	12983 lb
Grapple/Adapter	2956 lb
Performance
High Range Max. Travel Speed	3.29 mph
Max. Drawbar Pull	55078.18 lb
Dimensions
Operating Height - to Top of Cab (Fixed)	17.11 ft
Operating Height-to Top of Cab (Hydraulic)	19.85 ft
Operating Height to Top of Cab (Hydraulic Cab	17.63 ft
Shipping Height - Cab Tipped	11.28 ft
Operating Width	13.94 ft
Shipping Length	39.36 ft
Tail Swing Radius	9.93 ft
Ground Clearance	2.11 ft
Counterweight Clearance	4.45 ft
Rear of carrier to end of boom	39.26 ft
UC with Standard Shoe Width	13.2 ft
Swing Mechanism
Swing Torque	63659 lb ft
Swing Speed	10.2 RPM
Track
Track Shoes	24 in
Gauge	133.6 in
Shoes (each side)	50
Rollers (each side)	9
Overall Track Length	191 in
Service Refill Capacities
Fuel Tank	137.37 gal
Fuel Tank	137 gal
Cooling System	7.9 gal
Engine Oil	7.9 gal
Swing Drive	2.6 gal
Final Drive (each)	1.6 gal
Hydraulic System (including tank)	82 gal
Hydraulic Tank	38 gal
Drive
Maximum Drawbar Pull	55078.18 lb
Maximum Travel Speed	3.3 mph

BOOM

29'0" (8.85 m) Material Handling Boom Includes high pressure tig welded steel tubes

ELECTRICAL

80 Ampere alternator

Lights, cab mounted (two)

Horn

Light, storage box mounted

OPERATOR ENVIRONMENT

Bolt on FOGS capability

Polycarbonate windows except laminated glass in retractable front windshield / tempered glass in removable lower windshield and sliding upper door window

Rear window emergency exit

KAB 84/ E4P Suspension seat with adjustable arm rest and 3" retractable seat belt (cloth)

Monitor

Full graphic and full color display with language capability Warning information, filter, and fluid change information Working hour information Machine condition, error code and tool mode, and setting information Start up level check hydraulic oil, engine oil, and engine coolant

Pop up skylight with sunscreen

Windshield wiper / washers (upper/lower)

Positive filtered ventilation

Bi-level air conditioner, heater, and defroster

Instrument panel and gauges

Interior lighting

Coat hook

Ashtray with lighter

Literature compartment

Storage compartment suitable for lunch box

Neutral lever for all controls

Adjustable pilot operated joystick type (wrist lever) controls with integral electrical switches for operation of the grapple rotate (modulated) and magnet lift/drop

Modulated grapple open-close controls using right side joystick

Toggle switch in RH console to switch between magnet and grapple operation

Travel control pedals with removable hand levers

Platform next to cab for improved access

Washable floor mat

Sunscreen on windshield

Beverage holder

AM/FM Radio with two stereo speakers

POWER TRAIN

Cat® C7 diesel engine with 24-volt electric starting and air intake heater

Emissions package to meet EPA Tier 3 requirements

Radial seal air filter

Automatic engine speed control with manual return to idle (not functional when hydraulic generator is in operation)

Water separator in fuel line

Two speed auto-shift travel

Side by side cooling package (high ambient)

Removable external debris filter covering air inlets

Muffler

Air precleaner

Block heater

Electric priming pump

UNDERCARRIAGE

High square carbody

Hydraulic track adjusters

Track type undercarriage with grease lubricated seals

Idler and center section track guiding guards

24" (600 mm) Triple Grouser Shoes (50 sections)

Heavy duty track rollers

OTHER STANDARD EQUIPMENT

Heavy duty upper frame with bottom guards

Door locks and caps locks and Caterpillar One Key Security System

Mirrors (frame-right, cab-left)

16,980 lb (7.70 kg) Material Handling Counterweight

Automatic swing parking break

Fine swing control

Travel alarm

Extra batteries, heavy duty starter

Secondary engine shut off switch

Ether and cold weather starting aids

Cold start receptacle

Crosshead adapter

Product Link ready

HYDRAULIC SYSTEMS

Fully pressurized hydraulic system

Auxiliary pump and lines to drive generator

Medium pressure auxiliary hydraulic circuit for powering rotating grapples (includes pump, valve with flow control, and lines)

High pressure grapple open / close hydraulic circuit with shut off valves at the end of the stick

Boom and stick lowering check valve

Regeneration circuit for boom and stick

Heavy Lift Mode

One of two cab risers MUST be chosen:

6'5" (1.9 m) manual tilt cab riser

8'6" (2.6 m) hydraulic cab riser

One of two stick options MUST be chosen:

Stick, 19'8" (6.0 m) Material Handling providing a linkage with a maximum reach of 46'4" (14.1 m)

Stick, 24'3" (7.42 m) Material Handling providing a linkage with a maximum reach of 50'11" (15.5 m)

Guard, Falling Objects

Fan, auto reversing

Generator, 20 kW

Coolant extended life -58° F (-50° C)

Exit, secondary rear window with an internal and external opening provisions mandatory for Province of British Columbia, Canada

Magnet-Scrap Handling

57" (1.45 m) Walker Liftmaster Series

66" (1.68 m) Walker Liftmaster Series

Grapple-four tine, Orange Peel

0.75 yd3 (0.57 cubic meter)

1.25 yd3 (0.96 cubic meter)