Contact us: 800-492-6994
Online Services
Find a Sales Rep
Navigation
328D LCR - NACD
| Increased work tool options, new powerful engine and easier operation lead to increased productivity and lower operating costs. |
| Engine | |
| Engine Model | Cat® C7 ACERT |
| Net Flywheel Power | 204 hp |
| Net Power - ISO 9249 | 204 hp |
| Net Power - SAE J1349 | 202 hp |
| Net Power - EEC 80/1269 | 204 hp |
| Bore | 4.3 in |
| Stroke | 5 in |
| Displacement | 440 in3 |
| Weights | |
| Operating Weight | 72500 lb |
| Operating Weight - Std. Undercarriage | 72500 lb |
| Service Refill Capacities | |
| Fuel Tank Capacity | 106 gal |
| Cooling System | 8.5 gal |
| Engine Oil | 8.5 gal |
| Swing Drive | 2.6 gal |
| Final Drive (each) | 2.1 gal |
| Hydraulic System (including tank) | 76.6 gal |
| Swing Mechanism | |
| Swing Speed | 10.2 RPM |
| Swing Torque | 60628 lb ft |
| Drive | |
| Maximum Drawbar Pull | 67443 lb |
| Maximum Travel Speed | 2.6 mph |
| Hydraulic System | |
| Main Implement System - Maximum Flow (2x) | 62 gal/min |
| Max. pressure - Equipment | 5076 psi |
| Max. pressure - Heavy Lift | 5221 psi |
| Max. pressure - Travel | 5076 psi |
| Max. pressure - Swing | 3989 psi |
| Pilot System - Maximum flow | 8.6 gal/min |
| Pilot System - Maximum pressure | 566 psi |
| Boom Cylinder - Bore | 5.5 in |
| Boom Cylinder - Stroke | 55.4 in |
| CB2 Family Bucket Cylinder - Bore | 5.3 in |
| CB2 Family Bucket Cylinder - Stroke | 46 in |
| DB Family Bucket Cylinder - Bore | 5.9 in |
| DB Family Bucket Cylinder - Stroke | 46 in |
| Sound Performance | |
| Performance | ANSI/SAE |
| Standards | |
| Brakes | SAE J1026 APR90 |
| Cab/FOGS | SAE J1356 FEB88 ISO 10262 |
| Track | |
| Optional | 34 in |
| Optional | 24 in |
| Optional | 28 in |
| Number of Shoes Each Side - Long Undercarriag | 49 |
| Number of Track Rollers Each Side - Long Unde | 9 |
| Number of Carrier Rollers Each Side - Long Un | 2 |
| Dimensions | |
| Transport width | 135.4 in |
| Electrical |
| 65 Ampere alternator |
| Base machine light (frame) |
| Horn |
| Pre-Start monitoring system - checks for low fluids |
| (engine oil, coolant, hydraulic oil) prior to starting machine |
| Operator Environment |
| Air conditioner, heater, defroster with automatic climate control |
| AM/FM Radio with antenna and 2 speakers |
| Ashtray |
| Beverage/cup holder |
| Bolt-on Falling Object Guarding System (FOGS) capability |
| Cab Glass |
| Openable and retractable two-piece front windshield |
| Sky-light, pop-up, polycarbonate |
| Rear window, emergency exit |
| Coat Hook |
| Floor mat |
| Instrument panel and gauges |
| Joysticks, console mounted, pilot operated |
| Light, interior |
| Literature compartment |
| Monitor, full graphic color display |
| Neutral lever (lock out) for all controls |
| Polycarbonate side windows |
| Positive filtered ventilation |
| Pressurized cab |
| Seat, suspension, with high back and head rest |
| Seat belt, retractable |
| Sun shade (for skylight) |
| Travel control pedals with removable hand levers |
| Windshield wiper and washer |
| Engine/Power Train |
| Cat® C7 ACERT |
| Air Intake Heater |
| Air-to-air Aftercooler (ATAAC) |
| 24V Electric Starting |
| Hydraulic electronic unit injectors (HEUI) |
| 2300 m (7,500 ft) Altitude capability without derate |
| Automatic engine speed control with one touch low idle |
| Cooling |
| Protection of 43° C to |
| Electric Priming Pump |
| Straight line travel |
| Two speed auto-shift travel |
| Water separator in fuel line |
| Water level indicator for water separator |
| Undercarriage |
| Grease lubricated track |
| Heavy-duty rollers |
| Hydraulic track adjusters |
| Idler and center section track guards |
| Other Standard Equipment |
| Automatic swing parking brake |
| Auxiliary hydraulic valve |
| Capability of stackable valves (max of 2) for main valve |
| Capability of auxiliary circuit |
| Counterweight - 7720 kg (17,020 lb) |
| Door locks, cap locks and Caterpillar one key security system |
| Fine swing control |
| Fully pressurized hydraulic system |
| Heavy Lift |
| Mirrors (upper frame, rear) |
| S |
| Travel Alarm |
| Wiring provision for Product Link |
| Front Linkage |
| Booms |
| Reach 6.15 m (20 ft 2 in) |
| Sticks |
| Reach 3.2 m (10 ft 6 in) |
| Reach 2.65 m (8 ft 8 in) |
| Bucket Linkage |
| CB1 Family |
| Boom Lowering Control Device |
| Electrical |
| Light, cab mounted (one) |
| Machine Security System (MSS) |
| Power Supply (12V-5 Amp) |
| Product Link (PL121SR/PL321SR) |
| Guarding |
| Falling Object Guarding System (FOGS) |
| Either as a system or separate (Top/Bottom) |
| Front windshield guard |
| Full length, wire mesh |
| Heavy-Duty Bottom Guards |
| Rubber Bumpers (side) |
| Track Guiding Guards |
| Sprocket End, Idler end guard |
| Two-piece full length (center guard removed) |
| Vandalism Guards |
| Operator Environment |
| Hand Control Pattern Changer (ISO-SAE) |
| Rear window, secondary exit (hinged) |
| Seat, high back with air suspension and heater |
| Engine/Power Train |
| Prefilter, Air |
| Starting, Cold Weather Package |
| Two additional maintenance free batteries |
| High capacity starter motor |
| Heavy-duty cable |
| Jump-start receptacle |
| Ether aid |
| Block heater |
| Undercarriage |
| Track Shoes (mandatory attachment) |
| 600 mm (24") double grouser |
| 600 mm (24") triple grouser |
| 700 mm (28") triple grouser |
| 850 mm (34") triple grouser |
| Auxiliary Hydraulics |
| Hammer Circuit |
| For single function (1 way/2 pump) hydraulic tools |
| Thumb Circuit |
| For double function (2 way/1 pump) hydraulic tools |
| Tool Control System |
| For single or double function, (1 or 2 way/1 or 2 pump) hydraulic tools |
| Joysticks with additional switches |
| Program up to 10 tools in memory |
| Capability of adding medium pressure |
| Medium Pressure Circuit for tools requiring medium pressure |
| Hydraulic Pin Grabber Quick Coupler and controller |
| Lines for Booms and Sticks |
| Work Tools |
| Wide Offering of Buckets, Tips and sidecutters available through Cat Work Tools directly |
| Front Linkage |
| Booms |
| Reach 6.15 m (20 ft 2 in) |
| Sticks |
| Reach 3.2 m (10 ft 6 in) |
| Reach 2.65 m (8 ft 8 in) |
| Bucket Linkage |
| CB1 Family |
| Boom Lowering Control Device |
| Electrical |
| Light, cab mounted (one) |
| Machine Security System (MSS) |
| Power Supply (12V-5 Amp) |
| Product Link (PL121SR/PL321SR) |
| Guarding |
| Falling Object Guarding System (FOGS) |
| Either as a system or separate (Top/Bottom) |
| Front windshield guard |
| Full length, wire mesh |
| Heavy-Duty Bottom Guards |
| Rubber Bumpers (side) |
| Track Guiding Guards |
| Sprocket End, Idler end guard |
| Two-piece full length (center guard removed) |
| Vandalism Guards |
| Operator Environment |
| Hand Control Pattern Changer (ISO-SAE) |
| Rear window, secondary exit (hinged) |
| Seat, high back with air suspension and heater |
| Engine/Power Train |
| Prefilter, Air |
| Starting, Cold Weather Package |
| Two additional maintenance free batteries |
| High capacity starter motor |
| Heavy-duty cable |
| Jump-start receptacle |
| Ether aid |
| Block heater |
| Undercarriage |
| Track Shoes (mandatory attachment) |
| 600 mm (24") double grouser |
| 600 mm (24") triple grouser |
| 700 mm (28") triple grouser |
| 850 mm (34") triple grouser |
| Auxiliary Hydraulics |
| Hammer Circuit |
| For single function (1 way/2 pump) hydraulic tools |
| Thumb Circuit |
| For double function (2 way/1 pump) hydraulic tools |
| Tool Control System |
| For single or double function, (1 or 2 way/1 or 2 pump) hydraulic tools |
| Joysticks with additional switches |
| Program up to 10 tools in memory |
| Capability of adding medium pressure |
| Medium Pressure Circuit for tools requiring medium pressure |
| Hydraulic Pin Grabber Quick Coupler and controller |
| Lines for Booms and Sticks |
| Work Tools |
| Wide Offering of Buckets, Tips and sidecutters available through Cat Work Tools directly |