More powerful engine, improved cooling system, increased hydraulic pressure, and cab riser options lead to increased productivity and lower operating cost.

Engine
Engine Model	CAT® C9 ACERT
Net Flywheel Power	268 hp
Net Power - ISO 9249	268 hp
Net Power - SAE J1349	252 hp
Net Power - EEC 80/1269	268 hp
Bore	4.41 in
Stroke	5.87 in
Displacement	537 in3
Operating Specifications
Max. Reach	52.5 ft
Cab Riser - Fixed	6.4 ft
Cab Riser - Hydraulic	8.5 ft
Generator Set	26.8 hp
Hydraulic System
Maximum Flow (each of two pumps)	74 gal/min
Max. Pressure Implements	5076 psi
Max Pressure - Heavy Lift	5221 psi
Max. Pressure Travel	4900 psi
Max. Pressure - Swing	4264 psi
Pilot System Max. Flow	11 gal/min
Pilot System Max. Pressure	566 psi
Rotate Circuit for Grapple Max. Flow	13 gal/min
Rotate Circuit for Grapple Operating Pressure	2000 psi
Generator Auxiliary Pump Max Flow	42 gal/min
Generator Auxiliary Pump Max Pressure	2500 psi
Weights
Operating Weight	98386 lb
Upper	25975 lb
Counterweight	18327 lb
Undercarriage (includes carbody)	33625 lb
Two-Piece Front (with cylinders)	16003 lb
Grapple/Adapter	4456 lb
Performance
High Range Max. Travel Speed	3.11 mph
Max. Drawbar Pull	66093.82 lb
Dimensions
Operating Height - to Top of Cab (Fixed)	17.44 ft
Operating Height-to Top of Cab (Hydraulic)	20.19 ft
Operating Height to Top of Cab (Hydraulic Cab	11.67 ft
Shipping Height - Cab Tipped	11.81 ft
Operating Width	12.04 ft
Shipping Length	42.16 ft
Tail Swing Radius	11.43 ft
Ground Clearance	2.36 ft
Counterweight Clearance	4.84 ft
Rear of carrier to end of boom	42.16 ft
Swing Mechanism
Swing Torque	104070 lb ft
Swing Speed	10 RPM
Track
Track Shoes	24 in
Gauge	142 in
Shoes (each side)	49
Rollers (each side)	9
Overall Track Length	197.6 in
Service Refill Capacities
Fuel Tank	163.79 gal
Fuel Tank	163.8 gal
Cooling System	10.6 gal
Engine Oil	10.6 gal
Swing Drive	5 gal
Final Drive (each)	2.1 gal
Hydraulic System (including tank)	108 gal
Hydraulic Tank	46 gal
Drive
Maximum Drawbar Pull	66094 lb
Maximum Travel Speed	3.1 mph

BOOM

9.2 m (30'2'') MH Boom Includes high pressure twig welded steel tubes

ELECTRICAL

80 ampere alternator

Working lights, cab mounted (two)

Horn

Light, storage box mounted

OPERATOR ENVIRONMENT

Bolt on FOGS capability

Polycarbonate windows except laminated glass in retractable front windshield/tempered glass in removable lower windshield and sliding upper door window

Rear window exit

KAB 84/E4P suspension seat with adjustable armrest and 76 mm (3'') retractable seat belt (cloth)

Monitor

Full graphic and full color display with language capability, warning information, filter, and fluid Working hour information Machine condition, error code and tool mode setting information Start up level check for hydraulic oil, engine oil, and engine coolant change information

Pop-Up skylight, with sunscreen

Windshield wiper/washers (upper/lower)

Positive filtered ventilation

Bi-level air conditioner with auto climate control heater and defroster

Instrument panel and gauges

Interior lighting

Coat hook

Ashtray with lighter

Literature compartment

Storage compartment suitable for a lunch box

Neutral lever for all controls

Pre-start monitoring system (alert if there is a shortage of hydraulic oil, engine oil, or engine coolant)

Modulated grapple open-close controls using RH joystick

Toggle switch in RH console to switch between magnet and grapple operation

Travel control pedals with removable hand levers

Platform next to cab for improved access

Washable floor mat

Sunscreen on windshield

Beverage holder

AM/FM Radio with two stereo speakers

POWER TRAIN

Cat C-9 Diesel engine with 24V electric starting

Emissions package to meet EPA Tier 3 requirements

Radial seal air filter

Automatic engine speed control with manual return to idle (not functional when hydraulic generator is in operation)

Water separator in fuel line

Power mode selector (2 modes)

Two speed auto-shift travel

Side by side cooling package

Removable external debris filter covering air inlets (Hi-Ambient)

Straight line travel

Muffler

Air precleaner

Block Heater

Electric priming pump

UNDERCARRIAGE

High square carbody

Hydraulic track adjusters

Track type undercarriage with grease lubricated seals

Idler and rear section track guiding guards

600 mm (24") triple grouser shoes (49 sections)

Heavy duty track rollers

OTHER STANDARD EQUIPMENT

Heavy duty upper frame with bottom guards

Door locks, caps locks, and Caterpillar one key security system

Mirrors (frame-right, cab-left)

8330 kg (18,375 lb) Material Handling Counterweight

Automatic swing parking brake

Fine swing control

Travel alarm

Ether and cold weather starting aids

Secondary engine shut off switch

Extra batteries/Heavy duty starter

Cold Start receptacle

Crosshead adapter

Product Link ready

HYDRAULIC SYSTEMS

Fully pressurized hydraulic system

Auxiliary pump and lines to drive generator

Medium pressure auxiliary hydraulic circuit for powering rotating grapples (includes pump, valve with flow control and lines)

High pressure grapple open/close hydraulic circuit, flow control on grapple open and shutoff valves at end of stick

Regeneration circuit for boom and stick

Boom and stick lowering check valve

Heavy Lift Mode

One of two stick options MUST be chosen:

Stick, 7.6 m (24'11") Material Handling

Stick, 6.1 m (20'1") Material Handling

One of two cab riser options MUST be chosen:

1.9 m (6'5") manual tilt cab riser

2.6 m (8'6") hydraulic cab riser

Guard, falling objects

Fan, auto reversing

Exit, secondary rear window with an internal and external opening provisions mandatory for Province of British Columbia, Canada

20 kW (26.8 hp) hydraulic driven solid state genset

Magnet-Scrap Handling

1.68 m (66") Walker Lift Master Series

Grapple-four tine, Orange Peel

0.96 m3 (1.25 yd3) 1.15 m3 (1.5 yd3)