The Cat 826H Landfill Compactor was designed with exciting innovations that exceed customer expectations for performance, reliability and operator comfort.

Engine
Gross Power	401 hp
Net Power	354 hp
Engine Model	Cat® C15 ACERT
Flywheel Power	354 hp
Torque Rise	19 %
Bore	5.4 in
Stroke	6.7 in
Displacement	927.56 in3
Transmission
Forward 1	3.6 mph
Forward 2	6.03 mph
Reverse 1	4.1 mph
Reverse 2	6.59 mph
Hydraulic System
Vane Pump Output @ 2,000 RPM and 6900 kPa (1,	93 gal/min
Relief Valve Setting	3506.29 psi
Lift Cylinder Bore x Stroke	120.65 mm x 915 mm 4.74 in x 36.02 in
Axles
Front	Planetary-Fixed
Oscillating Rear	±5°
Brakes
Standards	Meet OSHA, SAE J1473 DEC84, ISO 3450:1985 standards
Wheels - Plus Tip Teeth with Abrasion Resistant Material (ARM)
Drum Width	3.94 ft
Drum Diameter	5.03 ft
Diameter with Tips	6.07 ft
Tips per Wheel	24
Wheels - Chevron-Pattern, Chopper Blades
Drum Width	3.94 ft
Drum Diameter	5.03 ft
Diameter with Blades	6.07 ft
Blades per Wheel	24
Straight Blade
Capacity	17 yd3
Width Over End Bits	14.77 ft
Moldboard Length	14.14 ft
Height	6.23 ft
U Blade
Capacity	21.84 yd3
Semi-U Blade
Capacity	18.97 yd3
Service Refill Capacities
Fuel Tank	177.52 gal
Cooling System	21.66 gal
Crankcase	8.98 gal
Transmission	16.38 gal
Differentials and Final Drives - Front	23.78 gal
Differentials and Final Drives - Rear	23.78 gal
Hydraulic Tank	23.25 gal
Weights
Operating Weight	81498 lb
Cab
ROPS/FOPS	Meets SAE and ISO standards
Sound Performance
Standards	Meet ANSI/SAE and ISO standards
Operating Specifications
Ground Clearance	1.6 ft
Dimensions
Height to Top of Cab with A/C	13.76 ft
Height to Top of Exhaust Pipe	12.25 ft
Height to Top of Hood	9.11 ft
Ground Clearance to Counterweight	3.37 ft
Height to Bottom of Ladder	2.32 ft
Center Line of Rear Axle to Edge of Counterwe	8.82 ft
Center Line of Rear Axle to Hitch	6.06 ft
Wheelbase	12.13 ft
Length with Blade on Ground	27.33 ft
Width over Wheels	12.5 ft
Width over Endbits (Blade)	14.77 ft
Turning Radius - Inside	10.57 ft
Turning Radius - Outside	24.06 ft
Blade Width Straight	14.77 ft
Blade Width U-Blade	173.15 in
Blade Height U-Blade	81.69 in
Drum Width	3.94 ft
Ground Clearance	1.6 ft

Electrical

Alarm, back-up

Alternator (95-amp)

Batteries, maintenance-free (4, 1,000 CCA)

Diagnostic connector

Electrical system (24-volt)

Lighting system, halogen (front and rear)

Lockable master disconnect switch

Starter, electric (heavy-duty)

Starting receptacle for emergency starts

Guards

Axle guards (front and rear)

Guards, powered (crankcase and power train)

Operator Environment

Air conditioner, roof mounted

Blade control lock system

Cab, pressurized and sound suppressed

Internal four-post rollover protective structure

Cigar lighter (12-volt, 15-amp) and ashtray

Coat hook

Command Control steering

Electro-hydraulic blade controls

Gear selection display

Heater and defroster

Horn, electric

Hour meter display

Light, dome (two in cab)

Lunchbox and beverage holders

Mirrors, rearview (externally mounted)

Monitoring system

Instrumentation, gauges:

Instrumentation, warning indicators:

Seatbelt, retractable, 76 mm (3 in) wide

Wet-arm wipers/washer (front and rear)

Intermittent front wiper

Power Train

Brakes, fully hydraulic, enclosed, wet multiple disc

Cat axles (outboard final drives and No-SPIN differentials [rear] standard)

Engine, Cat C15 MEUI with ACERT® Technology, ATAAC, ADEM

Fan, radiator, hydraulically-driven (automatically reversible)

Fuel priming aid

Muffler, sound-suppressed

Precleaner, engine air intake

Radiator, Next Generation Modular (NGMR) - 6 fins per inch cores

Separated cooling system

Starting aid (ether)

Switch, transmission neutralizer lockout

Throttle lock

Transmission, planetary with 2F/2R) electronic clutch pressure control

Other Standard Equipment

Automatic Blade Positioning (ABP)

Bumper, extended full width for radiator protection

Cat O-ring face seals, couplings and XT

Coolers

Engine oil

Hydraulic oil

Transmission oil

Doors, service access (locking)

Engine, crankcase, 500-hour interval change

Grouped Electronic Clutch Pressure Control remote mounted pressure taps

Hitch, drawbar with pin

Hood, metallic

Oil sampling valves

Rear egress, left and right sides

Striker bars, full coverage

Wheels, 1219 mm (48 in) with long-life, weld-on Plus Tips with rim extensions

Bulldozers

Bulldozer blade, hydraulics and linkage are not included in standard equipment

Antifreeze

Premixed with 50 percent concentration of Extended Life Coolant with freeze protection to -34°C (-29° F)

AM/FM/WB (Weather Band) cassette radio

Blades

Straight blade

Semi-U blade

U-blade

Cat Product Link

Cleaner fingers for Plus Tip wheels

Computer Aided Earthmoving System (CAES) attachment ready option (ARO)

Differentials, No-SPIN, front

Fast fill system

Fuel

Oil

Field Installed Attachments

Axle guards

Front

Rear

Cleaner fingers

Front window guard

Heater, engine coolant

Mirrors, interior mounted

Rear fan and grill guard

Rubber mounted glass cab

Sound suppression

STIC Steering

Swing-out stairways

Turbine precleaner

Warning rotating beacon light

Warning strobe light

Wheels (four combined)

Chopper blade

Traction tip

Various wheels, see Price List