Contact us: 800-492-6994
Online Services
Find a Sales Rep
Navigation
D10T - 2009, Tier 3, Global
| Strength from the past. Power for the future. |
| Engine | |
| Engine Model | Cat® C27 ACERT |
| Flywheel Power | 580 hp |
| Bore | 5.4 in |
| Stroke | 6 in |
| Displacement | 1647.6 in3 |
| Net Power 80/1269/EEC | 580 hp |
| Net Power SAE J1349/ ISO9249 | 580 hp |
| Net Power SAE J1349/ ISO9249 Min Fan | 603 hp |
| Gross Power ISO 14396 | 632 hp |
| Gross Power SAE J1995 | 646 hp |
| Service Refill Capacities | |
| Fuel Tank | 318 gal |
| Cooling System | 39.9 gal |
| Engine Crankcase* | 20.1 gal |
| Power Train | 51 gal |
| Final Drives (each) | 6.1 gal |
| Roller Frames (each) | 16.9 gal |
| Pivot Shaft Compartment | 8.7 gal |
| Weights | |
| Operating Weight | 146499 lb |
| Shipping Weight | 106402 lb |
| Dimensions | |
| Ground Clearance | 26.14 in |
| Track Gauge | 100 in |
| Width without Trunnions (Standard Shoe) | 10.8 ft |
| Height (FOPS Cab) | 13.44 ft |
| Height (Top of Stack) | 14.78 ft |
| Drawbar Height (Center of Clevis) | 34.02 in |
| Length of Track on Ground | 152.44 in |
| Overall Length Basic Tractor | 17.52 ft |
| Length Basic Tractor with Winch | 18.19 ft |
| Length with Single-Shank Ripper | 23.23 ft |
| Length with Multi-Shank Ripper | 23.76 ft |
| Overall Length (SU-Blade/SS Ripper) | 30.05 ft |
| Undercarriage | |
| Shoe Type | Extreme Service |
| Width of Shoe | 24 in |
| Shoes/Side | 44 |
| Grouser Height | 3.7 in |
| Pitch | 10.2 in |
| Ground Clearance | 24.2 in |
| Track Gauge | 100.4 in |
| Length of Track on Ground | 12.75 ft |
| Ground Contact Area | 7326 in2 |
| Track Rollers/Side | 8 |
| Number of Carrier Rollers | 1 per side (optional) |
| Track Roller Frame | |
| Oscillation | 13.8 in |
| Hydraulic Controls | |
| Pump Type | Gear |
| Lift Cylinder Flow | 107 gal/min |
| Tilt Cylinder Flow | 30 gal/min |
| Bulldozer Relief Valve Setting | 2725 psi |
| Tilt Cylinder Relief Valve Setting | 2950 psi |
| Ripper (Lift) Relief Valve Setting | 2725 psi |
| Ripper (Pitch) Relief Valve Setting | 2725 psi |
| Tank Capacity | 38 gal |
| Steering and Brakes | |
| Hydraulically applied multiple-disk clutches | 15.4 in |
| Transmission | |
| 1 Forward | 2.5 mph |
| 2 Forward | 4.5 mph |
| 3 Forward | 7.9 mph |
| 1 Reverse | 3.2 mph |
| 2 Reverse | 5.6 mph |
| 3 Reverse | 9.8 mph |
| 1 Forward - Drawbar Pull (1000) | 225 lbf |
| 2 Forward - Drawbar Pull (1000) | 125 lbf |
| 3 Forward - Drawbar Pull (1000) | 69 lbf |
| Blades | |
| Type | 10SU |
| Capacity (SAE J1265) | 24.2 yd3 |
| Width (over end bits) | 15.9 ft |
| Height | 6.9 ft |
| Digging Depth | 26.5 in |
| Ground Clearance | 58.9 in |
| Maximum Tilt | 39.1 in |
| Weight* (without hydraulic controls) | 22551 lb |
| Total Operating Weight** (with Blade and Sing | 146499 lb |
| Type | 10U |
| Capacity (SAE J1265) | 28.8 yd3 |
| Width (over end bits) | 17.25 ft |
| Height | 6.9 ft |
| Digging Depth | 26.5 in |
| Maximum Tilt | 42.3 in |
| Weight* (without hydraulic controls) | 23775 lb |
| Total Operating Weight** (with Blade and Sing | 147723 lb |
| Rippers | |
| Type | Single-Shank, Adjustable Parallelogram |
| Added Length | 5.77 ft |
| Number of Pockets | 1 |
| Maximum Clearance Raised (under tip, pinned i | 41.7 in |
| Maximum Penetration (standard tip) | 58.8 in |
| Maximum Penetration Force (shank vertical) | 46086 lb |
| Pry out Force | 93363 lb |
| Weight (without hydraulic controls) | 15690 lb |
| Total Operating Weight* (with SU-Blade and Ri | 146499 lb |
| Type | Multi-Shank, Adjustable Parallelogram |
| Number of Pockets | 3 |
| Added Length | 5.8 ft |
| Overall Beam Width | 115 in |
| Maximum Clearance Raised (under tip, pinned i | 41.1 in |
| Maximum Penetration (standard tip) | 34.5 in |
| Maximum Penetration Force (shank vertical) | 46086 lb |
| Pry out Force (Multi-Shank Ripper with one to | 93363 lb |
| Weight (one shank, without hydraulic controls | 17566 lb |
| Additional Shank | 1160 lb |
| Total Operating Weight** (with SU-Blade and R | 148375 lb |
| Winches | |
| Winch Model | Consult your Cat Dealer for installation arrangements. |
| ELECTRICAL |
| Alternator, 95-amp |
| Back-up alarm |
| Batteries, 12-volt (2), 200 amp-hour, maintenance free |
| Converter, 12-volt, 10-amp |
| Diagnostic connector |
| Horn, forward warning |
| Light, engine compartment |
| Lighting system, Halogen |
| (2 forward, 2 rear) |
| Starting receptacle |
| OPERATOR ENVIRONMENT |
| Advisor-electronic monitoring system |
| Armrest, adjustable |
| Cab, FOPS |
| Controls, electronic implement |
| Decelerator pedal |
| Finger Tip Control (FTC) steering |
| Governor switch, electronic |
| Heater and ventilation |
| Hydraulic system, electronically controlled for bulldozer control |
| Mirror, rearview |
| Radioready |
| Seat, adjustable contour suspension (gray fabric) |
| Seat belt, retractable 76 mm (3 in) |
| Steps, heavy-duty and Handles |
| Wipers, intermittent |
| UNDERCARRIAGE |
| 610 mm (24 inch) extreme service grouser with sealed and lubricated PPR track (44 section) |
| Rollers and idlers, lifetime lubricated |
| Sprocket rim segments, replaceable |
| Suspension-type undercarriage, Eight-roller tubular track roller frame |
| Track adjusters, hydraulic |
| Track guides |
| Two-piece master links |
| POWER TRAIN |
| C27 with ACERT Technology |
| 24-volt electric start |
| Advanced Modular Cooling System |
| Aftercooler, remote air-to-air |
| Air filters, dual with precleaner |
| Controlled throttle shifting |
| Coolant, extended life |
| Directional shift management |
| Ether starting aid, automatic |
| Fan, suction with hydraulic demand drive |
| Fuel priming pump, electric |
| Mufflers, dual, with rain cap |
| Parking brake, electronic |
| Prescreener |
| Separator, water/fuel |
| Thermal shields |
| Torque divider |
| Transmission, powershift, ECPC, (3F/3R speeds) |
| Four planet, double-reduction planetary final drives |
| OTHER |
| Auto-blade assist (for dual tilt) |
| CD ROM parts book |
| Ecology drains |
| Engine enclosures |
| Grade control ready |
| Guards: |
| Bottom, hinged extreme service |
| Crankcase, hinged extreme service |
| Pivot shaft and seals |
| Radiator, with towing device |
| Implement gear pump compatible for arctic conditions |
| Product Link ready |
| Vandalism protection |
| ELECTRICAL |
| Alternator, 95A Ducted |
| Converter, 24V to 12V additional 15A |
| Supplemental lights: |
| 6 Halogen |
| 10 Halogen (3 variations) |
| 11 Halogen (6) and HID (5) |
| GUARDS |
| Dozer tilt lines |
| Fan |
| Final drive (2 variations) |
| Power train |
| Undercarriage |
| Rear screen |
| OPERATOR ENVIRONMENT |
| Air conditioner (3 variations) |
| Visibility Arrangement (camera and mirrors) |
| Glass: |
| Dual pane with precleaner |
| 276 kPa (40 psi) with precleaner |
| Operators arrangement (improves comfort for smaller operators) |
| Seat, vinyl |
| Seat, air suspension |
| POWER TRAIN |
| Reversible cooling fan |
| Fast fuel system |
| Quick oil change system |
| Engine prelube |
| High debris radiator |
| UNDERCARRIAGE |
| Tracks, sealed and lubricated: |
| 710 mm (28 in) PPR Extreme service |
| 786 mm (31 in) PPR Extreme service |
| Rollers: |
| Carrier rollers, pin-on |
| SPECIAL ARRANGEMENTS |
| Cold weather arrangement |
| Stockpile arrangement |
| Waste handling arrangement |
| BULLDOZER ATTACHMENTS |
| AutoCarry system |
| Dual tilt |
| 10SU Blade |
| 10SU Abrasion resistant blade |
| 10U Blade |
| 10U Abrasion resistant blade |
| AccuGrade system |
| RIPPER ATTACHMENTS |
| Single shank (standard) |
| Single shank (deep) |
| Multi shank (standard) |
| Multi shank (deep) |
| Pin puller (single shank only) |
| Push block (single shank only) |
| OTHER ATTACHMENTS |
| Counterweights: |
| Rear with hitch |
| Front |
| Drawbar |
| Winch (dealer installed) |
| Heater, engine coolant (2 variations) |
| Low temperature start |
| Sound suppression (2 variations) |
| Slope and side-slope monitor |
| Computer aided earthmoving system |
| ELECTRICAL |
| Alternator, 95A Ducted |
| Converter, 24V to 12V additional 15A |
| Supplemental lights: |
| 6 Halogen |
| 10 Halogen (3 variations) |
| 11 Halogen (6) and HID (5) |
| GUARDS |
| Dozer tilt lines |
| Fan |
| Final drive (2 variations) |
| Power train |
| Undercarriage |
| Rear screen |
| OPERATOR ENVIRONMENT |
| Air conditioner (3 variations) |
| Visibility Arrangement (camera and mirrors) |
| Glass: |
| Dual pane with precleaner |
| 276 kPa (40 psi) with precleaner |
| Operators arrangement (improves comfort for smaller operators) |
| Seat, vinyl |
| Seat, air suspension |
| POWER TRAIN |
| Reversible cooling fan |
| Fast fuel system |
| Quick oil change system |
| Engine prelube |
| High debris radiator |
| UNDERCARRIAGE |
| Tracks, sealed and lubricated: |
| 710 mm (28 in) PPR Extreme service |
| 786 mm (31 in) PPR Extreme service |
| Rollers: |
| Carrier rollers, pin-on |
| SPECIAL ARRANGEMENTS |
| Cold weather arrangement |
| Stockpile arrangement |
| Waste handling arrangement |
| BULLDOZER ATTACHMENTS |
| AutoCarry system |
| Dual tilt |
| 10SU Blade |
| 10SU Abrasion resistant blade |
| 10U Blade |
| 10U Abrasion resistant blade |
| AccuGrade system |
| RIPPER ATTACHMENTS |
| Single shank (standard) |
| Single shank (deep) |
| Multi shank (standard) |
| Multi shank (deep) |
| Pin puller (single shank only) |
| Push block (single shank only) |
| OTHER ATTACHMENTS |
| Counterweights: |
| Rear with hitch |
| Front |
| Drawbar |
| Winch (dealer installed) |
| Heater, engine coolant (2 variations) |
| Low temperature start |
| Sound suppression (2 variations) |
| Slope and side-slope monitor |
| Computer aided earthmoving system |