Landfills are a crucial part in improving the cleanliness of our air, water, soil ... even the quality of our lives. Putting an innovative, conservation-minded track-type tractor to work on the landfill just makes sense. With its unique diesel-electric drive technology, it puts out fewer emissions and uses less fuel than conventional tractors. Like all Cat track-type tractors working in landfill applications, the D7E is a heavy-duty machine with waste handling guarding to safeguard uptime and support your business. It

Engine
Engine Model	Cat® C9.3 ACERT
Flywheel Power	252 hp
Gross Power	252 hp
Bore	4.5 in
Stroke	5.9 in
Displacement	567 in3
Net Power	235 hp
Gross Power	253 hp
Net Power	235 hp
Net Power	235 hp
Net Power	235 hp
Service Refill Capacities
Fuel Tank, High Capacity	126 gal
Cooling System	22.5 gal
Engine Crankcase	8 gal
Power Train	16 gal
Final Drives (each)	9 gal
Final Drive (LGP each)	11 gal
Pivot Shaft Compartment	1.8 gal
Hydraulic Tank	20 gal
Fuel Tank	108 gal
Weights
Operating Weight	63537 lb
Operating Weight - WHA U Blade	63969 lb
Operating Weight - WHA SU Blade	63537 lb
Operating Weight - LGP WHA	68123 lb
Rippers
Overall Beam Width	82.2 in
Beam Cross Section	14 in
Maximum Clearance Raised (under tip, pinned i	23.1 in
Maximum Penetration	25.6 in
Maximum Penetration Force	19639 lb
Pryout Force	52695 lb
Weight	3572 lb
Each Additional Shank	330 lb
Ramp Angle	26 Degrees
Pocket Spacing	35.4 in
Shank Gauge	70.9 in
Shank Section	72 mm × 228 mm 2.8 in × 9.0 in
Type	Multi-Shank
Number of Pockets	3
Standards
ROPS	SAE 1040, ISO 3471-1994/ISO 3449-2005, SAE 5231
FOPS	SAE 1040, ISO 3471-1994/ISO 3449-2005, SAE 5231
Sound	ANSI/SAE J1166 OCT 98
Brakes	ISO 10265 2008
Hydraulic Controls
Pump Output	82.4 gal/min
Pump Output	52.8 gal/min
Lift Cylinder Flow	42 gal/min
Tilt Cylinder Flow	17.4 gal/min
Pump Type	Piston, Variable Displacement
Tilt Cylinder Flow	24.6 gal/min
Ripper Cylinder Flow	42 gal/min
Pressure Setting	4000 psi
Ripper (Lift)	4000 psi
Ripper (Pitch)	4000 psi
Tilt Cylinder	4000 psi
Bulldozer	4000 psi
Steering	5950 psi
Winch
Winch Model	PA90
Maximum Full Drum Line Speed	116 ft/min
Oil Capacity	3.2 gal
Winch and Bracket Length	93.9 in
Winch Case Length	43.7 in
Winch Case Width	32.5 in
Increased Tractor Length	93.9 in
Increased Tractor Length	93.9 in
Drum Diameter	12.5 in
Drum Width	8.9 in
Flange Diameter	24 in
Drum Capacity	203 ft
Drum Capacity	185 ft
Ferrule Size (O.D. × Length)	60 mm × 65 mm 2.38 in × 2.56 in
Winch Drive	Hydraulic
Control	Electronic/Hydraulic
Installed Weight	3350 lb
Throat Clearance	8.6 in
Rope Diameter (recommended)	1 in
Maximum Bare Drum Line Pull	90000 lb
Maximum Full Drum Line Pull	57000 lb
Winch Length	43.9 in
Overall Width	43 in
Cable Ferrule Size (O.D. × Length)	60 mm × 65 mm 2.38 in × 2.56 in
Maximum Bare Drum Line Speed	70 ft/min
Weight	3350 lb
Drive Train
Type	Electric Drive
AC Compressor Nominal Input Voltage	320 volts
Electric Water Pump System Nominal Input Curr	5 amps
AC Generator and Propulsion Module Voltage	480 volts
AC Compressor Maximum Input Current	12 amps
Electric Water Pump System Nominal Input Volt	320 volts

ELECTRICAL

Accessory Power Converter (APC)

Alarm, Backup

Batteries, Heavy Duty

Converter, 24V to 12V, 10 Amp

Heater, Engine Coolant, 120V

Horn, Forward Warning

Product Link

OPERATOR ENVIRONMENT

Air Suspension Seat

Armrest, Adjustable

Bidirectional Shift Switch

Center Post Cab, ROPS/FOPS

Continuously Variable Speed Control

Differential Steering

Electro-Hydraulic Controls

Electronic Monitoring System

Foot Supports, Dash

Hour Meter, Electronic

Machine Isolation, Operator Presence

Mirror, Rearview

Modular HVAC, Cab Mounted

Radio Ready, 12V

Seat Belt, Retractable 3" (76 mm)

Speed Recall Button

Throttle Dial, Electronic

Tilt Cab and Tilt Cab Jack

Travel Control Pedal

Wipers, Intermittent

POWER TRAIN

Aftercooler

Air Cleaner, precleaner with strata tube dust ejector

C9.3 ACERT Engine

Continuously Variable Speed Transmission

Coolant, Extended Life

Drains, Ecology, Power Train

Electronic Air Cleaner Service Indicator

Fan, Hydraulically Driven Demand

Final Drives, Double Reduction

Fuel Priming Pump, Electronic

Muffler

Parking Brake, Electronic

Prescreener

Starting Aid, Ether

Turbocharger, Wastegated

Water Separator

UNDERCARRIAGE

Heavy Duty Track (610 mm/24

Heavy Duty Track (914 mm/36

Guards, End Track Guiding

Idler Guards

Master Link

Rollers and Idlers, Lifetime Lubricated

Sprocket Rim Segments, Replaceable

Track Adjusters, Gas Spring Recoil, Grease Track Adjust

OTHER STANDARD EQUIPMENT

CD ROM Parts Book

Engine Enclosures, Perforated

Front Tow Hook

Grade Control Ready

Guards, Hinged Bottom

Hood, Perforated

Hydraulics, Load Sensing, Dozer Lift and Tilt

Oil Cooler, Hydraulic

Radiator Doors, Louvered, Double Hinged

Vandalism Protection for Fluid Compartments and Battery Box

610 mm, 660 mm, 914 mm (24", 26", and 36") Track Pads

AccuGrade Ready Installation Arrangement

Black Hood and Back of Blade

Cold Weather Attachments

Engine Coolant Heater, 240 V

Enhanced Clean Cab

Fast Fuel

Final Drive Clamshell Guards

Final Drive Flange Protection

Front and Rear Screens

Heated Seat

Heavy Duty Grill Door, Hinged

Lights

Basic (6) Lights

Premium (10) HID Lights

Multi-shank Ripper and Ripper Hydraulics

Power Train Oil Change System

Rear Vision Camera

Reversible Fan

Sound Suppression (Europe)

SU (Semi-universal), U (Universal), (S) Straight, and Angle Blades

Sweeps (without canopy)

SystemOne Undercarriage

Track Guide Guards

Turbine Precleaner

Waste (Landfill) Arrangements

Winch Arrangement (PACCAR PA90)

Winch Hydraulics

Woodchip Arrangement