Contact us: 800-492-6994
Home Products Used Rental Parts & Service Power Systems Company Careers

M325D MH/ M325D LMH

The M325D MH and M325D LMH use the most sophisticated manufacturing technology to ensure the highest level of manufacturing quality. Excellent control, impressive lift capacity, and more comfortable operator station increase your productivity and lower your operating costs.
Engine
Engine Model CAT® C7 ACERT
ISO 9249 190 hp
Displacement 439 in3
EEC 80/1269 204 hp
Operating Specifications
Max. Travel Speed 12 mph
Max. Travel Speed 11 mph
Hyd Cab Riser Height 19.66 ft
Max reach 51.3 ft
Hydraulic System
Normal 5076 psi
Travel Circuit 5076.32 psi
Swing Mechanism 3988.54 psi
Weights
Operating weight 35261 kg (77737 lb)
Upper 19290 lb
Counterweight 12787 lb
Undercarriage 24436 lb
Performance
High Range Max. Travel Speed 12.43 mph
Max. Drawbar Pull 35677 lb
Dimensions
Shipping Height - Cab Tipped 15.6 ft
Shipping Width 9.81 ft
Width - Outriggers Down 15.96 ft
Shipping Length 40.05 ft
Tail Swing Radius 10.1 ft
Ground Clearance 0.81 ft
Counterweight Clearance 4.79 ft
Wheel Base 9.84 ft
Swing Mechanism
Swing Torque 60628 lb ft
Swing Speed 10.2 RPM
Service Refill Capacities
Cooling System 7.93 gal
Engine crankcase with filter 8.98 gal
Final Drive (each) 0.66 gal
Hydraulic System (including tank) 81.9 gal
Transmission
Drawbar pull 35677.17 lb
Undercarriage
Ground clearance 9.76 in
ELECTRICAL
65 Ampere alternator
Light, genset box mounted
Lights, cab mounted (one)
Warning horn (front)
Heavy Duty Batteries
OPERATOR ENVIRONMENT
AM-FM Radio
12V-7A power supply for radio and multipurpose socket
Ashtray with lighter
Beverage Holder
Interior Lighting
Coat Hook
Suspension seat with headrest
Wiring provision for electrical seat heating
Floor Mat
Positive filtered ventilation (pressurized cab)
Instrumental panel and gauges
Parking Brake
FOGS Guard
Sliding door window
Polycarbonate skylight
Sun shade for skylight and front windshield
Windshield wiper (parallel type) and washers
Alternate exit: hammer to break rear window glass
Automatic climate control with bi-level air conditioner, heater, and defroster
Tiltable steering column
Travel control pedals
Tiltable steering column
Storage compartment with cover suitable for lunch box
Neutral lever lockout for all controls
Adjustable pilot operated joystick type (wrist lever) controls each with 3 on/off buttons and 1 slider
Monitor -Full graphic and color display with language capability -Warning information, filter and fluid change information -Working hour information -Machine condition, error code, and tool mode setting information -Start up level check for hydraulic oil, engine oil, and engine coolant
Heavy lift mode selection
POWER TRAIN
Cat C7 with ACERT
Tier 3 emissions package
Radial seal air filters (330 mm/13") with double element, integrated cyclonic feature
Caterpillar® extended life coolant
Automatic engine speed control with push button return to idle
Water separator in fuel line
Muffler
Fuel economy mode
UNDERCARRIAGE
Creeper Speed
Exclusive 3 position transmission braking control
Four wheel hydrostatic drive with on-the-go shifting
Four independent or simultaneously controlled hydraulic stabilizers with single axis float pad
Fully hydraulic braking system
Hydraulic maximum speed limiter
Internal oil disk brakes
Lockable oscillating axle
Toolbox, left hand
Two wheel steer
Two Speed Hydrostatic Transmission
Wide steps on both sides
HYDRAULIC SYSTEMS
High pressure grapple open-close hydraulic circuit
Hydraulic and electric circuits for:
Boom Lowering check valves Stick lowering check valves Medium pressure functions (for HCR and grapple rotate)
OTHER STANDARD EQUIPMENT
Automatic swing parking brake
Antifreeze
Cold weather starting aids
Cat 2.6 m (8'5") Hydraulically Adjustable Cab Riser
Counterweight for material handling
Heavy duty upper frame with bottom guards
Travel Alarm
Boom and stick regeneration circuit
Separate hydraulic filter with re-useable metal tube for the filter element-no drop oil filter
Automatic Swing Parking Brake
Fine swing control
Doors and cab lock with Caterpillar One Key Security System
Fire wall between pump compartment and engine
Overheat prevention system
Mirrors(frame right, cab-left)
STICKS - One of two stick options must be chosen
Stick, 6 m (19'7") Material Handling for 14.3 m (47'0") front Stick, 7.42 m (24'3") Material Handling for 15.65 m (51'3") front
MAGNET, WALKER
1.22 m (48") Liftmaster Magnet for 15.65 m (51'3") front on M325D MH or M325D LMH
1.45 m (57") Liftmaster Magnet for 15.65 m (51'3") front on M325D LMH or 14.3 m (47'0") front on M325D MH
1.68 m (66") Liftmaster Magnet for14.3 m (47'0") front on M325D LMH only
GRAPPLES
0.57 m3 (0.75 yd3) for use with the 15.65 m (51'3") front on M325D MH 0.76 m3 (1.00 yd3) for use with 15.65 m (51'3") on M325D MH LMH 0.96 m3 (1.25 yd3) for use with the 14.3 m (47'0") front on M325D LMH or M325D MH
STICKS - One of two stick options must be chosen
Stick, 6 m (19'7") Material Handling for 14.3 m (47'0") front Stick, 7.42 m (24'3") Material Handling for 15.65 m (51'3") front
MAGNET, WALKER
1.22 m (48") Liftmaster Magnet for 15.65 m (51'3") front on M325D MH or M325D LMH
1.45 m (57") Liftmaster Magnet for 15.65 m (51'3") front on M325D LMH or 14.3 m (47'0") front on M325D MH
1.68 m (66") Liftmaster Magnet for14.3 m (47'0") front on M325D LMH only
GRAPPLES
0.57 m3 (0.75 yd3) for use with the 15.65 m (51'3") front on M325D MH 0.76 m3 (1.00 yd3) for use with 15.65 m (51'3") on M325D MH LMH 0.96 m3 (1.25 yd3) for use with the 14.3 m (47'0") front on M325D LMH or M325D MH