Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Engine Model Cat C9.3 ACERT
Engine Model Cat C9.3 ACERT
Bore 4.53 in
Bore 4.53 in

Engine

Engine Model
Cat C9.3 ACERT
Engine Model
Cat C9.3 ACERT
Bore
4.53 in
Bore
4.53 in
Stroke
5.87 in
Stroke
5.87 in
Displacement
567 in3
Displacement
567 in³
Gross Power – SAE J1995
320 hp
Net Power – SAE J1349
314 hp
Net Power – ISO 14396
316 hp
No Engine De-rating Below
7500 ft
Peak Engine Torque Net (SAE J1349)
1262 lbf-ft
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV
Cat® C9.3 ACERT™
Peak Engine Torque Gross (SAE J1995)
1275 ft·lbf
Peak Engine Torque Speed
1200 r/min
No Engine De-rating Below
7500 ft
Peak Engine Torque Net (SAE J1349)
1262 ft·lbf
Net Power - SAE J1349
314 HP
Net Power - ISO 14396
316 HP
Gross Power - SAE J1995
320 HP
Emissions
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
Note
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note
Net power when the fan is at maximum speed is 214 kW (287 hp) per the SAE reference conditions.
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio
Emissions
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
Note (1)
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (3)
Net power when the fan is at maximum speed is 214 kW (287 hp) per the SAE reference conditions.
Note (4)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio

Weights

Rated Payload
26.5 ton (US)

Body Capacities

Heaped SAE 2:1
19.6 yd3
Heaped (SAE 2:1)
19.6 yd³
Struck
14.4 yd3
Struck
14.4 yd³
Tailgate Heaped SAE 2:1
20.4 yd³
Tailgate Struck
14.5 yd³

Transmission

Forward 1
5 mph
Forward - 1
5 mT/hr
Forward 2
9 mph
Forward - 2
9 mT/hr
Forward 3
14 mph
Forward - 3
14 mT/hr
Forward 4
21 mph
Forward - 4
21 mT/hr
Forward 5
29 mph
Forward - 5
29 mT/hr
Forward 6
36 mph
Forward - 6
36 mT/hr
Reverse - 1
6 mT/hr

Sound Levels

Interior Cab
76 dB(A)
Note
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the
Note
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Operating Weights

Front Axle - Empty
31835 lb
Center Axle - Empty
9755 lb
Rear Axle - Empty
9205 lb
Total - Empty
50795 lb
Front Axle - Rated Load
5512 lb
Center Axle - Rated Load
23700 lb
Rear Axle - Rated Load
23700 lb
Total - Rated Load
52912 lb
Front Axle - Loaded
37374 lb
Center Axle - Loaded
33455 lb
Rear Axle - Loaded
32905 lb
Total - Loaded
103707 lb

Service Refill Capacities

Fuel Tank
108.8 gal
Fuel Tank
108.8 gal (US)
Cooling System
21.9 gal
Cooling System
21.9 gal (US)
Hydraulic System
29.1 gal (US)
Engine Crankcase
10 gal (US)
Transmission
12.4 gal (US)
Final Drives/Differential
33 gal (US)
Output Transfer Gear Box
6.3 gal (US)
DEF Tank
5.3 gal
DEF Tank
5.3 gal (US)

Body Hoist

Raise Time
10 s
Lower Time
8 s

Steering

Lock to Lock
4.75 seconds @ 60 rpm

Standards

Brakes
ISO 3450 – 2011
Brakes
ISO 3450 – 2011
Cab - FOPS
ISO 3449 Level II – 2005
Cab - ROPS
ISO 3471 – 2008
Steering
ISO 5010 – 2007
Steering
ISO 5010 – 2007

Body Plate

Type
High strength Brinell HB450 wear resistant steel
Type
High strength Brinell HB450 wear resistant steel

Turning Circle

Turning Dimensions: Steer Angle – Left/Right
45°
Note
Dimensions are for machines equipped with 23.5R25 tires.
Turning Dimensions - Aisle Width
210 in
Turning Dimensions - Clearance Radius
318 in
Turning Dimensions - Inside Radius
153 in
Turning Dimensions - SAE Turning Radius
294 in
Turning Dimensions - Steer Angle - Left/Right
45°
  • Dashboard Liquid Crystal Display (LCD):
    • Alert indicator, selected gear and direction, speed or auto shift, review Operation and Maintenance Manual (OMM), primary steering failure, seat belt warning, secondary steering failure, Machine Security System (MSS), secondary steering energy source engaged, hour meter and retarder active
  • Machine Operation Monitoring System includes:
    • Action lamp, engine oil pressure, primary steering system, left turn signal, high beam, coolant temperature, tachometer, parking brake, fuel level, right turn signal, transmission oil temperature, brake system, transmission hold, hoist control, hydraulic system, charging system, retarder, transmission fault, traction control system, check engine lamp