Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Engine Model Cat C15 ACERT
Engine Model Cat C15 ACERT
Bore 5.4 in
Bore 5.4 in

Engine

Engine Model
Cat C15 ACERT
Engine Model
Cat C15 ACERT
Bore
5.4 in
Bore
5.4 in
Stroke
6.75 in
Stroke
6.75 in
Displacement
926 in3
Displacement
926 in³
Gross Power – SAE J1995
452 hp
Net Power – SAE J1349
441 hp
Engine Model – U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final
Cat® C15 ACERT™
Net Power – ISO 14396
447 hp
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final
Cat® C15 ACERT™
Gross Power - SAE J1995
452 HP
Net Power - ISO 14396
447 HP
Net Power - SAE J1349
441 HP
No Engine De-rating Required Below
10000 ft
Peak Engine Torque Gross (SAE J1995)
1931 lbf-ft
Peak Engine Torque Net (SAE J1349)
1887 ft·lbf
Peak Engine Torque Speed
1200 rpm
No Engine De-rating Required Below
10000 ft
Peak Engine Torque Gross (SAE J1995)
1931 ft·lbf
Peak Engine Torque Speed
1200 r/min

Weights

Rated Payload
36 t

Body Capacities

Heaped (SAE 2:1)
26.8 yd³
Struck
19.6 yd³
Tailgate Heaped SAE 2:1
28.7 yd³
Tailgate Struck
20.3 yd³

Transmission

Forward 1
3.7 mph
Forward - 1
3.7 mile/h
Forward 2
4.9 mph
Forward - 2
4.9 mile/h
Forward 3
6.8 mph
Forward - 3
6.8 mile/h
Forward 4
8.6 mph
Forward - 4
8.6 mile/h
Forward 5
11.4 mph
Forward - 5
11.4 mile/h
Forward 6
14 mph
Forward - 6
14 mile/h
Forward 7
19.3 mph
Forward - 7
19.3 mile/h
Reverse - 1
3.9 mile/h
Reverse - 2
8.9 mile/h
Forward - 8
23.1 mile/h
Forward - 9
33.5 mile/h

Sound Levels

Interior Cab
79 dB(A)

Operating Weights

Front Axle - Empty
41844 lb
Center Axle - Empty
13977 lb
Rear Axle - Empty
13404 lb
Total - Empty
69225 lb
Front Axle - Rated Load
5864 lb
Center Axle - Rated Load
33113 lb
Rear Axle - Rated Load
33113 lb
Total - Rated Load
72091 lb
Front Axle - Loaded
47708 lb
Center Axle - Loaded
47091 lb
Rear Axle - Loaded
46517 lb
Total - Loaded
141316 lb

Body Plate

Type
High strength Brinell HB450 wear resistant steel
Type
High strength Brinell HB450 wear resistant steel

Service Refill Capacities

Fuel Tank
126.8 gal
Fuel Tank
126.8 gal (US)
Cooling System
23.7 gal
Cooling System
23.7 gal (US)
Engine Crankcase
10.6 gal (US)
DEF Tank
6.6 gal
Transmission/OTG
19.8 gal
Final Drives (each)
1.3 gal
Axles (each)
15.8 gal
Axles - Each
15.8 gal (US)
DEF Tank
6.6 gal (US)
Final Drive - Each
1.3 gal (US)
Transmission - OTG
19.8 gal (US)
Steering/Hoist Hydraulic System
36.9 gal (US)
Brake Cooling Tank
17.69 gal (US)

Body Hoist

Raise Time
12 s
Lower Time
7 s

Steering

Lock to Lock
4.6 seconds @ 60 rpm

Standards

Brakes
ISO 3450-2011
Brakes
ISO 3450-2011
Cab - FOPS
ISO 3449 Level II-2005
Cab - ROPS
ISO 3471-2008
Steering
ISO 5010-2007
Steering
ISO 5010-2007

Turning Circle

Turning Dimensions: Aisle Width
221 in
Note
Dimensions are for machines equipped with 26.5R25 tires.
Turning Dimensions - Aisle Width
221 in
Turning Dimensions - Clearance Radius
331 in
Turning Dimensions - Inside Radius
157 in
Turning Dimensions - SAE Turning Radius
314 in
Turning Dimensions - Steer Angle - Left/Right
45°
  • ROPS/FOPS cab, machine operation monitoring system includes:
    • Action lamp, engine oil pressure, primary steering system, left turn signal, high beam, coolant temperature, tachometer, parking brake, fuel level, right turn signal, transmission oil temperature, brake system, transmission hold, hoist control, hydraulic system, charging system, retarder, transmission fault, traction control system, check engine lamp
    • Diesel Exhaust Fluid (DEF) level, emission malfunction lamp, regeneration active, Diesel Particulate Filter (DPF), regeneration disabled
  • Liquid Crystal Display (LCD):
    • Alert indicator, selected gear and direction, speed or auto shift, review Operation and Maintenance Manual (OMM), primary steering failure, seat belt warning, secondary steering failure, DPF regeneration filter, Machine Security System (MSS), secondary steering energy source engaged, hour meter and retarder active