Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Net Power 97 hp
Net Power 97 HP
Maximum Gross Power: Maximum Engine Speed 2350 RPM
Engine Model Cat C4.4 ACERT™

Engine

Net Power
97 hp
Net Power
97 HP
Maximum Gross Power: Maximum Engine Speed
2350 RPM
Engine Model
Cat C4.4 ACERT™
Maximum Gross Power: ISO 14396 (DIN)
101 hp
Rated Net Power: Rated Engine Speed
2200 RPM
Maximum Gross Power - ISO 14396
100 HP
Maximum Gross Power - SAE J1995
102 HP
Rated Net Power - SAE J1349
96 HP
Engine Model
Cat C4.4 ACERT�
Maximum Gross Power - ISO 14396 (DIN)
101 HP
Maximum Gross Power - Maximum Engine Speed
2350 r/min
Rated Net Power - Rated Engine Speed
2200 r/min
Maximum Gross Power
100 hp
Maximum Gross Power
100 HP
Rated Net Power - ISO 9249
97 HP
Rated Net Power - ISO 9249 (DIN)
98 HP
Maximum Gross Torque - SAE J1995
336 ft·lbf
Maximum Gross Torque: ISO 14396
332 lbf-ft
Maximum Net Torque: SAE J1349
325 lbf-ft
Maximum Net Torque - ISO 9249
329 ft·lbf
Displacement
268 in3
Bore
4.13 in
Stroke
5.00 in
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Bore
4.13 in
Displacement
268 in³
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396
332 ft·lbf
Maximum Net Torque - SAE J1349
325 ft·lbf
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Stroke
5 in

Weights

Operating Weight
19315 lb
Operating Weight
19315 lb

Service Refill Capacities

Cooling System
5.7 gal
Cooling System
5.7 gal (US)
Fuel Tank
40.7 gal
Fuel Tank
40.7 gal (US)
Hydraulic System (including tank)
25.9 gal
Engine Crankcase
2.3 gal
Engine Crankcase
2.3 gal (US)
Hydraulic System - Including Tank
25.9 gal (US)
Axles - Front Center Differential
2 gal (US)
Axles - Rear Center Differential
2 gal (US)
Hydraulic Tank
14.5 gal
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Transmission
0.9 gal
Hydraulic Tank
14.5 gal (US)
Transmission
0.9 gal (US)

Operating Specifications

Rated Bucket Capacity
2.5 yd3
Rated Bucket Capacity
2.5 yd³

Buckets

Bucket Capacities
1.3-1.9 m3 (1.7-2.5 yd3)
Bucket Capacities
1.3-1.9 m3 (1.7-2.5 yd3)

Cab

ROPS
ISO 3471:2008
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
FOPS
ISO 3449:2005 Level II
Note
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).

Steering

Steering Articulation Angle - Each Direction
40 °
Maximum Flow - Steering Pump
22 gal/min
Maximum Working Pressure – Steering Pump
3263 psi
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
2.8 s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75 turns
Maximum Working Pressure - Steering Pump
3263 psi

Loader Hydraulic System

Maximum Flow – Implement Pump
39 gal/min
Maximum Flow – Implement Pump: 3rd Function, Maximum Flow, Standard
24 gal/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
32 gal/min
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24 gal/min
Maximum Working Pressure – Implement Pump
4061 psi
Relief Pressure - Tilt Cylinder
4931 psi
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3046 psi
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3046 psi
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4 s
Hydraulic Cycle Time - Rackback
2.2 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s
Hydraulic Cycle Time - Total Cycle Time
12.5 s
Maximum Flow - Implement Pump
39 gal/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
24 gal/min
Maximum Working Pressure - Implement Pump
4061 psi

Transmission

Forward and Reverse - Low Range, Speed Range 1*
6.3 mile/h
Forward and Reverse - Low Range, Speed Range 2*
12.5 mile/h
Forward and Reverse - High Range
25 mile/h
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Tires

Standard Size
17.5-25 12PR
Other Choices Include
17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Note
Other tire choices are available. Contact your Cat dealer for details.
Note
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Axles

Front
Fixed; Locking differential (standard)
Rear
Oscillating �11 degrees; Locking differential (Standard)