Chat with us, powered by LiveChat
816F Series 2 Landfill Compactor Specifications
Gross Power 253.0 hp
Gross Power 253 HP
Net Power 232.0 hp
Net Power 232 HP

Engine

Gross Power
253.0 hp
Gross Power
253 HP
Net Power
232.0 hp
Net Power
232 HP
Engine Model
Cat® C9 ACERT™
Engine Model
Cat® C9 ACERT™
Net Power ISO 3046-2
232 HP
Net Power ISO 9249
235.0 hp
Net Power - ISO 9249
235 HP
SAE J1349
232.0 hp
SAE J1349
232 HP
EEC 80/1269
235.0 hp
EEC 80/1269
235 HP
Torque Rise
19.0 %
Torque Rise
19 %
Bore
4.4 in
Bore
4.4 in
Stroke
5.9 in
Stroke
5.9 in
Displacement
537.0 in3
Displacement
537 in³

Transmission

Forward 1
3.5 mph
Forward - 1
3.5 mile/h
Forward 2
5.9 mph
Forward - 2
5.9 mile/h
Reverse 1
4.0 mph
Reverse - 1
4 mile/h
Reverse 2
6.6 mph
Reverse - 2
6.6 mile/h

Hydraulic System

Vane Pump Output at 2015 rpm and 6900 kPa (1000 psi)
29.6 gal/min
Relief Valve Setting
2248 psi
Lift Cylinder Bore x Stroke
120.65 mm x 913.9 mm 4.75 in x 36 in

Axles

Front
Fixed
Front
Fixed
Oscillating Rear
±8°

Brakes

Standards
Meet OSHA regulations

Wheels - Plus Tip Teeth with Abrasion Resistant Material (ARM)

Drum Width
3.33 ft
Drum Diameter
4.25 ft
Tips per Wheel
20

Wheels - Chevron-Pattern, Chopper Blades

Drum Width
3.33 ft
Drum Diameter
4.25 ft
Blades per Wheel
20

Straight Blade

Width - Over End Bits
11.9 ft
Moldboard - Length
11.67 ft
Height
6.27 ft

Service Refill Capacities

Fuel Tank
117.8 gal
Fuel Tank
117.8 gal (US)
Cooling System
14.5 gal
Cooling System
14.5 gal (US)
Crankcase
9.0 gal
Crankcase
9 gal (US)
Transmission
13.2 gal
Transmission
13.2 gal (US)
Differential - Final Drives - Front
11.4 gal (US)
Differential - Final Drives - Rear
11.4 gal (US)
Hydraulic System (including Tank)
36.2 gal
Hydraulic System - Including Tank
36.2 gal (US)
Hydraulic Tank
23.2 gal
Hydraulic Tank
23.2 gal (US)

Weights

Operating Weight
52364.0 lb
Operating Weight
52364 lb

Cab

ROPS/FOPS
Meet SAE and ISO standards

Sound Performance

Standards
Meet required sound standards

Operating Specifications

Ground Clearance
1.5 ft
Ground Clearance
1.5 ft

Dimensions (Approximate)

Height to Top of Cab with A/C
12.75 ft
Height - Top of Cab with A/C
12.75 ft
Height - Top of Exhaust Pipe
11.36 ft
Height to Top of Hood
8.16 ft
Height - Top of Hood
8.16 ft
Ground Clearance - Bumper
2.64 ft
Ground Clearance - Striker Bars
2.13 ft
Centerline of Rear Axle to Edge of Bumper
6.22 ft
Centerline of Rear Axle to Hitch
5.5 ft
Wheelbase
10.9 ft
Wheel Base
10.9 ft
Length - With Blade on Ground
25.76 ft
Width over Wheels
10.95 ft
Width - Over Wheels
10.95 ft
Width - Over End Bits - Blade
11.99 ft
Turning Radius - Outside End Bits
21.21 ft
Blade Width - Straight
11.67 ft
Drum Width
3.33 ft
Ground Clearance
1.49 ft
Ground Clearance
1.49 ft
  • ELECTRICAL
    • Alarm, backup
    • Alternator (80 amp)
    • Batteries, maintenance-free (2)
    • Diagnostic connectors
    • Lighting system, halogen (front, rear and cab-mounted)
    • Starting and charging system (24-volt)
    • Starting receptacle for emergency starts
  • GUARDS
    • Axle (front and rear)
    • Drive shaft
    • Hinged crankcase
    • Hydraulic tank
    • Power train
    • Steering cylinder
  • OPERATOR ENVIRONMENT
    • Air conditioner, roof-mounted
    • Blade control system locks
    • Cab, pressurized and sound suppressed (ROPS/FOPS)
    • Coat hook
    • Cigar lighter and ashtray
    • Caterpillar Monitoring System
    • Dome light (cab)
    • Fuses, blade style (in-cab)
    • Heater and defroster
    • Horn, electric (steering wheel mounted)
    • Hydraulic steering
    • Lunchbox and beverage holders
    • Mirrors, rearview (internally-mounted)
    • Seat, KAB mechanical suspension
    • Seat belt, retractable, 76 mm (3 in) wide
    • Wet-arm wipers/washers (front and rear)
  • POWER TRAIN
    • Brakes, fully hydraulic, enclosed, wet-disc
    • Engine, Cat® C9 ACERT
    • Engine cooling fan (suction)
    • Fuel priming pump (electric)
    • Muffler
    • Radiator, Next Generation Modular (NGMR)
    • Starting aid (ether)
    • Torque converter
    • Transmission, planetary (2 forward/2 reverse speeds)
  • OTHER STANDARD EQUIPMENT
    • Cat O-ring face seals/couplings
    • XT hoses
    • Coolers
    • Hitch, drawbar with pin
    • Hood, metallic with lockable service doors
    • Hydraulic oil cooler
    • Oil sampling valves
    • Striker bars (all wheels)
    • Vandalism protection caplocks
    • Wheels (1016 mm/40 in) with weld-on Plus Tips with extended inner rim
  • BULLDOZER
    • Bulldozer blade, hydraulics and linkage are not included in standard equipment
  • ANTIFREEZE
    • Premixed 50 percent concentration of Extended Life Coolant with freeze protection to -34° C (-29° F)