Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Engine Output - SAE J1995 858 kW (1,150 hp)
Standard Bucket Capacity Face Shovel (heaped 2:1) - 10.0 m3 (13.1 yd3); Backhoe (heaped 1:1) - 10.0 m3 (13.1 yd3)
Operating Weight Face Shovel - 183 tonnes (202 tons); Backhoe - 186 tonnes (205 tons)
Engine output SAE J1995 - 2 × Cat C18 ACERT 1150.0 hp

General Data

Engine Output - SAE J1995
858 kW (1,150 hp)
Standard Bucket Capacity
Face Shovel (heaped 2:1) - 10.0 m3 (13.1 yd3); Backhoe (heaped 1:1) - 10.0 m3 (13.1 yd3)
Operating Weight
Face Shovel - 183 tonnes (202 tons); Backhoe - 186 tonnes (205 tons)
Engine output SAE J1995 - 2 × Cat C18 ACERT
1150.0 hp

Hydraulic System with Pump Managing System

Hydraulic tank capacity - approximately
528.0 gal
Main pumps - AC version
2 × variable axial piston pumps
Main pumps - Diesel version
4 × variable swash plate pumps
Main pumps - Maximum oil flow - AC version
2 × 578 L/min (2 × 153 gal/min)
Main pumps - Maximum oil flow - Diesel version
4 × 412 L/min (4 × 109 gal/min)
Maximum pressure, attachment
4350.0 psi
Maximum pressure, swing pumps
5365.0 psi
Swing pumps - AC version
1 × reversible swash plate pump
Swing pumps - Diesel version
2 × reversible swash plate pumps
Swing pumps - Maximum oil flow - AC version
516 L/min (136 gal/min)
Swing pumps - Maximum oil flow - Diesel version
2 × 288 L/min (2 × 76 gal/min)
Total volume of hydraulic oil - approximately
660.0 gal

Hydraulic Oil Cooling

Diameter of fans
2 × 1120 mm (2 × 3 ft 8 in)
Oil flow of cooling pumps - AC version
608 + 218 L/min (161 + 58 gal/min)
Oil flow of cooling pumps - Diesel version
2 × 412 L/min (2 × 109 gal/min)

Operator’s Cab

Components
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
Internal dimensions of cab - Height
7.05 ft
Internal dimensions of cab - Length
5.91 ft
Internal dimensions of cab - Width
4.27 ft
New Board Control System (BCS) Features:
Electronic monitoring & data logging system for vital signs & service data of engines, hydraulic system & lubrication system
Operator’s eye level: AC version - approximately
20.34 ft
Operator’s eye level: Diesel version - approximately
17.72 ft
Components
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
Components
Roller blind at windshield
Components
Windshield with parallel intermittent wiper/washer
Components
All-round safety glass, armored windshield and sliding side window
Components
FOPS (rock guard; approved acc. to DIN ISO 3449) integrated into cab structure
Components
Joystick controls integrated in independently adjustable seat consoles
Components
Fold-away auxiliary seat with safety belt
Components
Emergency exit harness kit
Components
Machine access via retractable boarding ladder, hydraulically operated
Components
Robust instrument panel includes large colored BCS screen with transflective technology

Swing System

Maximum swing speed - AC version
4.1 RPM
Maximum swing speed - Diesel version
4.7 RPM
Parking Brakes
Wet multiple disc brake, spring-loaded/hydraulically released
Swing Drives
2 compact planetary transmissions with axial piston motors
Swing Ring
Triple race roller bearing with sealed internal gearing

Undercarriage

Bottom Rollers (each side)
8
Components
Chain links connected by hardened pins and bushings
Gradeability of travel drives - maximum
88.0 %
Maximum tractive force
278440.0 lb
Parking Brakes
Wet multiple disc brake, spring applied/hydraulically released
Support Rollers (each side)
2 plus a skid plate in between
Track Pads (each side)
47
Travel Drives (each side)
1 planetary transmission with 1 axial piston motor
Travel speeds: AC version - maximum
1.06 mph
Travel speeds: Diesel version - maximum
1.43 mph
Components
Track guides
Components
Acoustic travel alarm
Components
Forged double-grouser track pads
Components
All running surfaces of sprockets, idlers, rollers and track links are hardened
Components
Fully hydraulic self-adjusting track tensioning system with membrane accumulator
Components
Automatic hydraulic retarder valve to prevent overspeed on downhill travel

Automatic Lubrication System

Capacity of Grease Barrel
53.0 gal

Operating Weight

Backhoe - Ground Pressure
18.6 N/cm2 (27.3 psi)
Backhoe - Operating weight
410060.0 lb
Backhoe - Standard track pads
2.62 ft
Shovel - Ground Pressure
18.5 N/cm2 (26.9 psi)
Shovel - Operating weight
404320.0 lb
Shovel - Standard track pads
2.62 ft

Electrical System (diesel drive)

Batteries (12V each) in series/parallel installation
4 × 210 Ah; 420 Ah - 24V
System voltage
24V
Working spotlights
8 × Xenon lights

Retractable Service Station

Installation
Retractable service station installed underneath the engine module and easily accessible from ground.

Attachments

All buckets (FS and BH) are equipped with a wear package consisting of:
- Wing shrouds on side walls - Bottom edge protection
All buckets (FS and BH) are equipped with a wear package consisting of:
- Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth
Shovel attachment with unique TriPower kinematics ensuring the following main features:
- Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces
Shovel attachment with unique TriPower kinematics ensuring the following main features:
- Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance
Shovel attachment with unique TriPower kinematics ensuring the following main features:
- Constant boom momentum throughout the whole lift arc - Crowd force assistance
Type
Inspection hole in boom (FS)
Type
Special wear packages for highly abrasive materials on request
Type
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Type
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Type
Booms and sticks are stress-relieved after welding
Type
Booms and sticks are torsion-resistant, welded box design of high tensile steel with massive steel castings at pivot areas

Diesel Engines

Alternators
2 × 150A
Aspiration
Turbocharged and charge air cooled
Bore
5.7 in
Displacement
1105.0 in3
Emissions
U.S. E.P.A. Flex, EU Flex
Fuel tank capacity
845.0 gal
Make and model
2 × Cat C18 (Tier 3)
Maximum altitude without deration at 20° C (68° F) - above sea level
6560.0 ft
Number of cylinders (each engine)
6
Stroke
7.2 in
Total rated gross power - SAE J1995
858 kW 1,800 min-1 (1,150 hp 1,800 min-1)
Total rated net power - ISO 3046/1
824 kW 1,800 min-1 (1,104 hp 1,800 min-1)
Total rated net power - SAE J1349
824 kW 1,800 min-1 (1,104 hp 1,800 min-1)

Engine

Engine Model
2 × Cat® C18 ACERT™
Gross Power - SAE J1995
1150.0 hp
Net Power - SAE J1349
1104.0 hp
Note
Electric drive option available (650 kW) on 6018 AC/6018 AC FS

Bucket

Bucket Capacity - Backhoe (heaped 1:1)
13.1 yd3
Bucket Capacity - Front Shovel (heaped 2:1)
13.1 yd3

Operating Specifications

Bucket Payload
20.0 tons
Operating Weight - Backhoe
205.0 tons
Operating Weight - Front Shovel
202.0 tons

Electric Motor - 6018 AC/6018 AC FS

Frequency
50 Hz (60 Hz on request)
Output
650 kW
Rated current IN
72A (at 6.3 kV)
Revolutions
1,500 min-1 (1,800 min-1 on request)
Starting current
350% of IN (197% of IN optional)
Type
Squirrel cage induction motor
Voltage
6.3 kV ± 10% (other on request)
  • Twin-engine concept
  • TriPower shovel attachment
  • Independent oil-cooling system
  • 3-circuit hydraulic system
  • Electronic-hydraulic servo control
  • Board Control System (BCS)
  • Torque control in closed-loop swing circuit
  • Automatic central lubrication system
  • Xenon working lights
  • GENERAL
    • Export crating
    • Finishing as per end user’s corporate colors
  • SUPERSTRUCTURE
    • Camera system
    • High capacity water separator
    • Various cold-weather packages
  • CAB
    • Various heating and air-conditioning systems
    • Roller blinds at all windows
    • Additional instrumentation
  • UNDERCARRIAGE
    • Track pad width 600 mm (2 ft)
    • Belly plate
  • ATTACHMENT
    • Guards for boom cylinders of FS attachment
    • Xenon lighting on boom
    • Special wear packages
    • Additional optional equipment available on request.