Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Net Power 699.0 hp
Engine Model Cat® C27 ACERT™
Bore 5.4 in
Stroke 6.0 in

Engine

Net Power
699.0 hp
Engine Model
Cat® C27 ACERT™
Bore
5.4 in
Stroke
6.0 in
Displacement
1649.5 in3
Torque Rise
18.0 %
Rated Speed
1,800 rpm
Net Power – SAE J1349
699.0 hp
Emissions
U.S. EPA Tier 4 Final OR Tier 2 Equivalent
Net Power
699 HP
Engine Model
Cat® C27 ACERT™
Bore
5.4 in
Stroke
6 in
Displacement
1649.5 in³
Torque Rise
18 %
Rated Speed
1,800 rpm
Gross - ISO 14396
752 HP
Peak Torque - 1,200 rpm
2624 lb/ft
Rated Speed - Gross - ISO 14396
752 HP
Rated Speed - Gross - SAE J1995
766 HP
Rated Speed - Net Power - SAE J1349 - High Ambient
648 HP
Rated Speed - Net Power - SAE J1349 - Standard Ambient
699 HP
Emissions
U.S. EPA Tier 4 Final OR Tier 2 Equivalent
Net Power - SAE J1349
699 HP

Operating Specifications

Operating Weight
178517.0 lb
Rated Payload
17.5 tons
Rated Payload
17.5 t
Rated Payload – High Lift
17.5 tons
Operating Weight
178517 lb
Bucket Capacity Range
8.6 m³-10.0 m³ (11.25 yd³-13.0 yd³)
Rated Payload - Standard
17.5 ton (US)
Cat Truck Match - Standard
773-775
Cat Truck Match - High Lift
775-777
Rated Payload - High Lift (Loose Material)
22 ton (US)
Rated Payload - High Lift
17.5 ton (US)
Rated Payload - High Lift (Face Material)
17.5 ton (US)
Rated Payload - Standard (Face Material)
17.5 ton (US)
Rated Payload - Standard (Loose Material)
22 ton (US)

Transmission

Transmission Type
Cat planetary power shift
Forward 1
4.5 mph
Forward 2
8.3 mph
Forward 3
14.2 mph
Reverse 1
4.9 mph
Reverse 2
9.1 mph
Reverse 3
15.5 mph
Direct Drive - Forward 2
8.5 mph
Direct Drive - Reverse 1
5.4 mph
Direct Drive - Reverse 2
9.6 mph
Transmission Type
Cat planetary power shift
Forward - 1
4.5 mile/h
Forward - 2
8.3 mile/h
Forward - 3
14.2 mile/h
Reverse - 1
4.9 mile/h
Reverse - 2
9.1 mile/h
Reverse - 3
15.5 mile/h
Direct Drive - Forward 1
Lock-up disabled
Direct Drive - Forward 2
8.5 mile/h
Direct Drive - Forward 3
15.2 mile/h
Direct Drive - Reverse 1
5.4 mile/h
Direct Drive - Reverse 2
9.6 mile/h
Direct Drive - Reverse 3
16.4 mile/h

Hydraulic System – Lift/Tilt

Cylinders, Double Acting: Lift, Bore and Stroke
235 mm × 1287 mm (9.3 in × 50.7 in)
Cylinders, Double Acting: Tilt, Bore and Stroke
292.1 mm × 820 mm (11.5 in × 32.3 in)
Pilot System
Open loop and pressure reducing
Relief Valve Setting – Lift/Tilt
4786.0 psi

Hydraulic Cycle Time

Raise
8.2 Seconds
Dump
2.9 Seconds
Rack Back
4.3 Seconds
Lower Float Down
3.6 Seconds
Total Hydraulic Cycle Time (empty bucket)
13.8 Seconds

Service Refill Capacities

Fuel Tank
294.3 gal
Cooling System
54.9 gal
Transmission
29.1 gal
Differentials and Final Drives – Front
71.6 gal
Differentials and Final Drives – Rear
68.9 gal
Engine Crankcase
20.0 gal
Fuel Tank
294.3 gal (US)
Cooling System
54.9 gal (US)
Transmission
29.1 gal (US)
Hydraulic System Factory Fill
210 gal (US)
Hydraulic Tank - Implement and Hydraulic Fan
68.9 gal (US)
Hydraulic Tank - Steering and Braking
34.9 gal (US)
Differential - Final Drives - Front
71.6 gal (US)
Differential - Final Drives - Rear
68.9 gal (US)
Engine Crankcase
20 gal (US)

Buckets

Bucket Capacities
7.4-14.9 m3 (9.7-19.5 yd3)
Bucket Capacities
7.4-14.9 m³ (9.7-19.5 yd³)

Axles

Front
Fixed
Rear
Trunnion
Oscillation Angle
8.5°
Front
Fixed
Rear
Trunnion
Oscillation Angle
8.5°

Brakes

Brakes
SAE J1473 OCT90, ISO 3450:1992
Brakes
SAE J1473 OCT90, ISO 3450:1992
Brakes
SAE J1473 OCT90, ISO 3450:1992

Hydraulic System – Steering

Steering System – Circuit
Pilot, load sensing
Steering System – Pump
Piston, variable displacement
Total Steering Angle
70°

Sound Performance – Standard

Machine Sound Level (ISO 6395:2008)
115.0 dB(A)

Sound Performance – Suppression

Machine Sound Level (ISO 6395:2008)
113.0 dB(A)

Hydraulic Cycle Times

Raise
8.2 s
Dump
2.9 s
Lower
3.7 s
Lower Float Down
3.6 s
Rack Back
4.3 s
Total Hydraulic Cycle Time - Empty Bucket
13.8 s

Hydraulic System - Steering

Relief Valve Setting - Steering
4641 psi
Maximum Flow at 1,400 rpm
94.5 gal/min
Steering System - Circuit
Pilot, load sensing
Steering System - Pump
Piston, variable displacement
Total Steering Angle
70°

Sound Performance - Standard

Operator Sound Level (ISO 6396:2008)
69 dB(A)
Machine Sound Level (ISO 6395:2008)
115 dB(A)

Hydraulic System - Lift/Tilt

Lift/Tilt System
Variable displacement piston
Maximum Flow at 1,800 rpm (1)
216 gal/min
Maximum Flow at 1,800 rpm (2)
22.2 gal/min
Relief Valve Setting
507 psi
Cylinders, Double Acting - Lift, Bore and Stroke
235 mm × 1287 mm (9.3 in × 50.7 in)
Lift/Tilt System - Circuit
Positive flow control
Relief Valve Setting - Lift/Tilt
4786 psi
Cylinders, Double Acting - Tilt, Bore and Stroke
292.1 mm × 820 mm (11.5 in × 32.3 in)
Pilot System
Open loop and pressure reducing

Sound Performance - Suppression

Operator Sound Level (ISO 6396:2008)
69 dB(A)
Machine Sound Level (ISO 6395:2008)
113 dB(A)
  • OPERATOR ENVIRONMENT
    • Air conditioner and heater with automatic temperature control
    • Cab, sound-suppressed pressurized, protective structure (ROPS/FOPS), radio ready for (entertainment) includes antenna, speakers and converter (12V, 10-15 amp)
    • 12V power port for mobile phone or laptop connection
    • Camera, rear vision
    • Cigar lighter and ashtray
    • Coat hook
    • Electro-hydraulic tilt and lift controls (seat mounted)
    • Flip-up armrest
    • Heater and defroster
    • Horn, electric
    • Implement hydraulic lockout
    • Instrumentation, gauges:
      – Engine coolant temperature
      – Fuel level
      – Ground speed
      – Gear
      – Hydraulic oil temperature
      – Speedometer/tachometer
      – Torque converter temperature
    • Instrumentation, warning indicators:
      – Action alert system, three category
      – Automatic transmission model enable status
      – Brake malfunction
      – Bucket float status
      – Delayed engine shutdown status
      – Engine idle shutdown status
      – Engine malfunction
      – Fuel economy mode enable status
      – Hydraulic lockout
      – Lockup clutch enable status
      – Low fuel level
      – Parking brake status
      – Rimpull control enable status
      – Seatbelt warning
      – Secondary steering (if equipped)
      – Throttle lock status
      – Transmission gear
    • Keypad, control with indicator lights:
      – Auto trans mode speed range
      – Auto/manual transmission mode
      – Fuel economy mode
      – Implement kickout
      – Lockup clutch
      – Reduced rimpull
      – Throttle lock
    • Light, dome (cab)
    • Lunchbox and beverage holders
    • Mirrors, rearview (externally mounted)
    • Seat, Cat comfort (cloth) air suspension
    • Seat belt, retractable, 76 mm (3 in) wide
    • STIC control system with steering lock
    • Tinted glass
    • Trainer seat with lap belt
    • Vital Information Management System (VIMS) 3G with graphical information display: external data port, customizable operator profiles, cycle timer, and integral Cat Production Measurement
      – Wet-arm wipers/washers (front, rear and corner) intermittent front wiper
  • POWER TRAIN
    • Brakes, full hydraulic, enclosed, oil-disc
    • Axle-shaft oil-disc service brake
    • Electro hydraulic parking brake
    • Case drain filters
    • Cat clean emission module (Tier 4 only)
    • Demand fan
    • Engine Cat C27 ACERT
    • Fuel priming pump (electric)
    • Ground level engine shutoff, bumper
    • Mufflers (under hood) (Tier 2 equivalent only)
    • Precleaner, engine air intake
    • Radiator, Aluminum Modular (AMR)
    • Separated cooling system
    • Starting aid, (ether) manual override
    • Throttle Lock
    • Torque Converter, Impeller Clutch with lock-up clutch feature and rimpull control system
    • Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)
  • ELECTRICAL
    • Alarm, back-up
    • Alternator, 150 amp
    • Batteries, maintenance free (2 – 1,400 CCA)
    • Converter, 10/15 amp, 24V to 12V
    • Deutsch component connectors
    • Electrical system, 24V
    • Electronic transmission control
    • Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
    • Starter, electric
    • Starter lockout in bumper
    • Starting receptacle for emergency start
    • Transmission lockout in bumper
  • OTHER
    • Automatic bucket tilt/lift kickouts electronically adjustable from cab
    • Axle temperature sensor
    • Battery disconnect and jump start receptacle, bumper
    • Coupling, Caterpillar O-ring face seals
    • Economy mode with on demand throttle
    • Emergency platform egress
    • Engine, crankcase, 500 hour interval with CH4
    • Engine idle management features:
      – Auto idle kickdown
      – Delayed engine shutdown
      – Engine idle shutdown
    • Fenders, steel (front)
    • Guards, crankcase and power train
    • Grouped/labeled lube points
    • Hitch, drawbar with pin
    • Hoses, Cat XT
    • Oil sampling valves
    • Positive flow control hydraulic system
    • Product Link
    • Sight Gauges: hydraulic tanks, steering/fan and implement/brake, and transmission
    • Stairway, left and right rear access
    • Steering, load sensing
    • Toe kicks
    • Vandalism protection caplocks
    • Venturi stack
    • Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
  • POWER TRAIN
    • –50° C (–58° F) antifreeze
    • Engine oil change system, high speed, Wiggins
    • Engine block heater 120V or 240V
    • High ambient cooling – software
  • OPERATOR ENVIRONMENT
    • Cab precleaner
    • AM/FM/CD/MP3 radio
    • Satellite Sirius radio with Bluetooth
    • LED warning strobe
    • CB radio ready
    • Window sun shade
  • MISCELLANEOUS ATTACHMENTS
    • Front and rear roading fenders
    • Fast fill fuel system (Shaw-Aero)
    • Axle oscillation stop
    • Heavy duty cab mounts