Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
793F Mining Truck Specifications
Engine Model Cat C175-16
Engine Model Cat C175-16
Gross Power - SAE J1995 2650 hp
Gross Power - SAE J1995 2650 HP

Engine

Engine Model
Cat C175-16
Engine Model
Cat C175-16
Gross Power - SAE J1995
2650 hp
Gross Power - SAE J1995
2650 HP
Bore
6.9 in
Bore
6.9 in
Stroke
8.7 in
Stroke
8.7 in
Displacement
5187 in3
Displacement
5187 in³
Torque Rise
20%
Note
Power ratings apply at 1,750 rpm when tested under the specified condition for the specified standard.
Note
Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 99 kPa (29.61 Hg) dry barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42.780 kJ/kg (18,390 Btu/lb) when engine used at 30° C (86° F).
Note (1)
Power ratings apply at 1,750 rpm when tested under the specified condition for the specified standard.
Note (2)
Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 99 kPa (29.61 Hg) dry barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42.780 kJ/kg (18,390 Btu/lb) when engine used at 30° C (86° F).
Torque Rise
20%
Note
No engine derating required up to 3200 m (10,500 ft) altitude.
Emissions
Meets Tier 4 Final emission standards.
Emissions
Meets Tier 4 Final emission standards.
Note (3)
No engine derating required up to 3200 m (10,500 ft) altitude.

Weights – Approximate

Chassis Weight
274587 lb
Note
Chassis weight with 100 percent fuel, hoist, body mounting group, rims and 40.00R57 tires.
Note
Body weight varies depending on how body is equipped.

Weights - Approximate

Body Weight Range
26 862-47 627 kg (59,220-105,000 lb)
Chassis Weight
274587 lb
Note (1)
Chassis weight with 100 percent fuel, hoist, body mounting group, rims and 40.00R57 tires.
Note (2)
Body weight varies depending on how body is equipped.

Operating Specifications

Nominal Payload Capacity
250 tons
Nominal Payload Capacity
250 ton (US)
Steer Angle
36 Degrees
Steer Angle
36 °
Top Speed – Loaded
37.3 mph
Turning Diameter – Front
93 ft
Turning Circle Clearance Diameter
107 ft
Gross Machine Operating Weight
386 007 or 390 089 kg (851,000 or 860,000 lb)
Top Speed - Loaded
37.3 mile/h
Turning Circle - Clearance Diameter
107 ft
Turning Diameter - Front
93 ft
Note
Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations.
Note
Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations.

Final Drives

Differential Ratio
1.8:1
Differential Ratio
1.8:1
Planetary Ratio
16:1
Planetary Ratio
16:1
Total Reduction Ratio
28.8:1
Total Reduction Ratio
28.8:1

Transmission

Forward 1
8 mph
Forward - 1
8 mile/h
Forward 2
10.8 mph
Forward - 2
10.8 mile/h
Forward 3
14.8 mph
Forward - 3
14.8 mile/h
Forward 4
19.9 mph
Forward - 4
19.9 mile/h
Forward 5
27.1 mph
Forward - 5
27.1 mile/h
Forward 6
37.3 mph
Forward - 6
37.3 mile/h
Reverse
7.3 mph
Reverse
7.3 mile/h

Suspension

Rear Axle Oscillation
±4.9 degrees
Rear axle - Oscillation
±4.9 degrees
Effective Cylinder Stroke – Front
5.1 in
Effective Cylinder Stroke – Rear
4.2 in
Effective Cylinder Stroke - Front
5.1 in
Effective Cylinder Stroke - Rear
4.2 in

Body Hoists

Pump Flow – High Idle
224 gal/min
Relief Valve Setting – Raise
2955 psi
Body Raise Time – High Idle
19 Seconds
Body Lower Time – Float
20 Seconds
Body Power Down – High Idle
17.5 Seconds
Body Lower Time - Float
20 s
Body Power Down - High Idle
17.5 s
Body Raise Time - High Idle
19 s
Pump Flow - High Idle
224 gal/min
Relief Valve Setting - Raise
2955 psi
Note
Twin, two-stage hydraulic cylinders mounted outside main frame, double-acting cylinders in second stage.
Note
Power raise in both stages, power down in second stage.
Note (3)
Automatic body lower modulation reduces impact on frame.
Note (1)
Twin, two-stage hydraulic cylinders mounted outside main frame, double-acting cylinders in second stage.
Note (2)
Power raise in both stages, power down in second stage.

Brakes

Outside Diameter
34.5 in
Standards
ISO 3450:1996
Standards
ISO 3450:1996
Brake Surface – Rear
20847 in2
Brake Surface – Front
13921 in2
Brake Surface - Front
13921 in²
Brake Surface - Rear
20847 in²

Weight Distributions – Approximate

Front Axle – Loaded
33%
Rear Axle – Loaded
67%
Front Axle – Empty
49%
Rear Axle – Empty
51%

Weight Distributions - Approximate

Front Axle - Empty
49%
Front Axle - Loaded
33%
Rear Axle - Empty
51%
Rear Axle - Loaded
67%

Capacity - HP - 100% Fill Factor

Struck
112.6-151 m3 (147-197.5 yd3)
Heaped (SAE 2:1)*
162-191 m3 (212-250 yd3)
Note (1)
Contact your local Cat dealer for body recommendation.
Note (2)
*ISO 6483:1980

Service Refill Capacities

Fuel Tank
750 gal
Cooling System
284 gal
Crankcase
82 gal
Steering System (Includes Tank)
77 gal
Brake/Hoist System (Includes Tank)
347 gal
Torque Converter/Transmission Sump
27 gal
Diesel Exhaust Fluid Tank
62 gal
Rear Axle - Housing
260 gal (US)
Torque Converter/Transmission System - Including Sump
55 gal (US)
Brake Hoist System - Includes Tank
347 gal (US)
Cooling System
284 gal (US)
Crankcase
82 gal (US)
Diesel Exhaust Fluid Tank
62 gal (US)
Fuel Tank
750 gal (US)
Steering System - Including Tank
77 gal (US)
Torque Converter - Transmission Sump
27 gal (US)

ROPS

ROPS Standards
ROPS (Rollover Protective Structure) cab offered by Caterpillar meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
ROPS Standards
ROPS (Rollover Protective Structure) cab offered by Caterpillar meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
FOPS Standards
FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 for Operator and ISO 13459:2012 Level II FOPS for Trainer.
FOPS Standards
FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 for Operator and ISO 13459:2012 Level II FOPS for Trainer.

Sound

Sound Standards
The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 74 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed.
Sound Standards (1)
The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 74 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed.
Sound Standards
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Sound Standards (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.

Steering

Steering Standards
ISO 5010:2007
Steering Standards
ISO 5010:2007

Dimensions (Approximate)

Height to Top of ROPS
18.75 ft
Overall Length
43.83 ft
Wheelbase
19.37 ft
Rear Axle to Tail
13.11 ft
Ground Clearance
3.42 ft
Dump Clearance
4.27 ft
Loading Height – Empty
20.28 ft
Overall Height – Body Raised
45 ft
Centerline Front Tire Width
18.40 ft
Engine Guard Clearance
4.35 ft
Overall Canopy Width
28.09 ft
Outside Body Width
26.06 ft
Inside Body Width
24.06 ft
Front Canopy Height
23.21 ft
Rear Axle Clearance
3.71 ft
Centerline Rear Dual Tire Width
16.28 ft
Overall Tire Width
24.95 ft
Note
Shown with 162 m3 (212 yd3) HP Body.
Centerline Front Tire Width
18.4 ft
Centerline of Rear Dual Tire Width
16.28 ft
Dump Clearance
4.27 ft
Engine Guard Clearance
4.35 ft
Front Canopy Height
23.21 ft
Ground Clearance
3.42 ft
Height - Top of ROPS
18.75 ft
Inside Body Width
24.06 ft
Loading Height - Empty
20.28 ft
Note
Shown with 162 m3 (212 yd3) HP Body.
Outside Body Width
26.06 ft
Overall Canopy Width
28.09 ft
Overall Height - Body Raised
45 ft
Overall Length
43.83 ft
Overall Tire Width
24.95 ft
Rear Axle - Clearance
3.71 ft
Rear Axle - Tail
13.11 ft
Wheel Base
19.37 ft
  • ELECTRICAL
    • Alarm, Back-up
    • Brushless Alternator, 225 ampere
    • Batteries, 210-amp hour, low maintenance, 12-volt (2)
    • Converter, 12-volt electrical
    • Electrical System, 24-volt, 10, 15 and 20 amp
    • Jump Start Receptacle
    • Lighting System
      • Back-up and Hazard Lights
      • Directional Signals (front and rear LED)
      • Front Stair Access/Service Deck
      • Stop/Tail Lights (LED)
      • Engine Compartment
      • VIMS, Blue Light (LED)
      • Headlights, with Lo-Hi Beam Selector
      • Brake and Retarder Light Status Ready
  • OPERATOR ENVIRONMENT
    • Air Conditioner with Automatic Climate Control
    • 12-volt DC Power Supply (3)
    • Coat Hook
    • Cup Holder
    • Diagnostic Connection Port
    • Dome Courtesy Light
    • Entertainment Radio Ready
      • 5 amp Converter, Speakers and Wiring Harness
    • Gauge/Indicators
      • Gauge Panel:
        – Transmission Fluid Temperature
        – Brake Oil Temperature
        – Engine Coolant Temperature
        – Fuel Level
        – Torque Converter Oil Temperature
      • Electric Engine Control Fault Indicator
      • Electric Hour Meter
      • Speedometer
      • Tachometer
      • Diesel Exhaust Fluid Level Indicator
    • Heater/Defroster, 11 070 kCal (45,930 Btu)
    • Hoist, Body Control (electric)
    • Horn
    • Integrated Object Detection System
    • Heated Mirrors, Right and Left
    • ROPS Cab, Insulated/Sound Suppressed
    • Seat, Operator, Air Suspension
    • Seatbelt, Operator, Three Points, Retractable
    • Seatbelt, Trainer, Two Points, Retractable
    • Stairway and Walkway Access, 600 mm (23.6 in)
    • Steering Wheel, Tilt, Padded, Telescopic
    • Storage Compartments
    • Tinted Glass
    • Transmission Gear Indicator
    • VIMS Message Center with Advisor
    • Window, Operator, Electric Powered
    • Windshield Wiper, Intermittent Control and A/C Condenser Filled Washer Bottle
    • Plug and Play Radio 12V Unswitched Power Supply Outlets
    • Fire Suppression Ready Cab
  • POWER TRAIN
    • Cat C175-16 meets Tier 4 Final emission standards
      • Air Cleaner with Precleaner (4)
      • Air-to-Air Aftercooler (ATAAC)
      • Automatic Starter Protection
      • Ether Starting Aid (automatic)
      • Multi-Point Oil Pressure Sensing
      • Turbocharging (4)/Aftercooled
    • Engine Aftertreatment System
      • Pump Electronic Tank Unit (PETU)
      • Clean Emissions Module (CEM)
    • Braking System
      • Automatic Retarder Control, Adjustable
      • Brake Release Motor (towing)
      • Engine Overspeed Protection
      • Extended Life Brake Disc Material
      • Oil-cooled, Multi-disc (front and rear)
        – Service, Retarding, Parking, Secondary
      • Park Brake Integrated with Gear Selector
      • Secondary, Emergency
    • Advanced Productivity Electronic Controls Strategy (APECS)
    • Transmission
      • 6-speed, Automatic Powershift with Electronic Control (ECPC)
      • Body-up Reverse Neutralizer
      • Body-up Shift Inhibitor
      • Controlled Throttle Shifting
      • Directional Shift Management
      • Downshift/Reverse Shift Inhibitor
      • Individual Clutch Modulation
      • Lock-up Torque Converter
      • Neutral Coast Inhibitor
      • Neutral Start Switch
      • Programmable Top Speed
      • Pre-lubrication/Engine
      • Rear Axle Continuous Lubrication/Filtration
  • OTHER STANDARD EQUIPMENT
    • Auto Lubrication System with 41 kg (90 lb) barrel, auto shutoff, and grease filter
    • Aux “Buddy” Dumping Quick Connect
    • Aux Steering Quick Connect (towing)
    • Driveline Guard
    • Fast Fill Diesel Exhaust Fluid System
    • Fast Fill Diesel Fuel System
    • Fuel Filter with Water Separator
    • Ground Level Battery Lockout
    • Ground Level Engine Shut-down
    • Ground Level Engine Start Lockout
    • Ground Level Transmission Lockout
    • Ground Level VIMS Data Port
    • Hi-speed Crankcase Oil Change
    • Hydraulic Filters, 1,000 hour
    • Reservoirs (3 separate)
      • Brake/Hoist, Steering/Fan, Transmission/Converter
    • Rock Ejectors
    • Service Points, Ground Level
    • Sight Level Gauges for Hydraulic/Engine Oil
    • SOSSM Sample Ports
    • Supplemental Steering (automatic)
    • Tie Down Eyes
    • Tow Hooks (front)/Tow Pin (rear)
    • Traction Control System
    • Vandalism Protection Locks
    • Vital Information Management System (VIMS)
      • Includes VIMS Payload Monitor with MAX Payload and Speed Manager
        – (Recommend using download cable 127‑9797 and PC based software JERD2175. Supplemental software “VIMS Supervisor” YERA1403. Order separately. Computer not provided.)
    • Primary Access Anti-slip High Visibility Demarcations
    • Tie Off Points
    • Rubber-lined Battery Box Lid
    • Portable Fire Extinguisher Mounting
    • SL-V Grease Injectors
    • Fuel Tank Mud Guards
  • ANTIFREEZE
    • Extended Life Coolant to –35° C (–30° F)
  • OPTIONAL EQUIPMENT
    • Additional Retarding for Downhill Hauls
    • Body Heat
    • Cat Comfort Air Suspension Trainer Seat
    • Antifreeze/Coolant Protects to –50° C (–58° F)
    • Brake Wear Indicator Gauge
    • Cabin Air Precleaner
    • Center Tow Bumper Attachment
    • Electric Powered Window, Right Side
    • Electric Starting System
    • Engine Coolant and Oil Heater for Cold Weather Starts
    • Additional Lighting
    • High Visibility Reflector Group
    • Workshop Horn
    • Working at Heights
    • Emergency Stop
    • Four Mirror Package
    • Hydraulic Tank Mud Guards
    • Engine Delay Shutdown Timer
    • Extended Life Wheel Stations
    • External Digital Payload Display
    • Fast Fill Service Center with Live SOS and Keypad
    • Cat Comfort Heated Operator Seat
    • High Intensity Discharge (HID) Lighting (front and rear)
    • Hub Odometer (km and miles)
    • Portable Fire Extinguisher
    • Rear Axle Lubrication Cooler
    • Retractable Front Sun Visor
    • Rim Guard
    • Rims (813 mm/32 in)
    • Road Analysis Control (RAC)
    • Throttle Lock
    • Walkway and Handrail for Rear Cab Access
    • Wheel Chocks
    • Work Area Vision System (WAVS)