Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Engine Model Cat® C15 ACERT™
Engine Model Cat® C15 ACERT™
Rated Power 1800 r/min
Gross Power - SAE J1995 409 hp

Engine

Engine Model
Cat® C15 ACERT™
Engine Model
Cat® C15 ACERT™
Rated Power
1800 r/min
Gross Power - SAE J1995
409 hp
Gross Power - SAE J1995
409 HP
Net Power – 80/1269/EEC
377.0 hp
Gross Power - VR Engine - SAE J1995
409 HP
Gross Power - Tier 3 Engine - SAE J1995
409 HP
Bore
5.4 in
Bore
5.4 in
Stroke
6.8 in
Stroke
6.8 in
Displacement
928.0 in3
Displacement
928 in³

Operating Specifications

Gross Machine Mass
132300 lb
Gross Machine Mass
132300 lb
Nominal Payload Capacity
66139 lb
Body Capacities
11.3-17.5 m3 (14.8-22.9 yd3)

Weights

Empty
63647 lb
Front Axle (1)
42944 lb
Rear Axle (1)
20704 lb
Loaded
132277 lb
Front Axle (2)
58451 lb
Rear Axle (2)
73826 lb

Weight Distribution

Front Axle (1)
67.5 %
Rear Axle (1)
32.5 %
Front Axle (2)
44.2 %
Rear Axle (2)
55.8 %

Transmission

Forward 1
4.2 mph
Forward - 1
4.2 mile/h
Forward 2
7.6 mph
Forward - 2
7.6 mile/h
Forward 3
13.9 mph
Forward - 3
13.9 mile/h
Forward 4
25.4 mph
Forward - 4
25.4 mile/h
Reverse 1
4.8 mph
Reverse - 1
4.8 mile/h

Final Drives

Differential Ratio
3.38:1
Differential Ratio
3.38:1
Final Drive Ratio
4.76:1
Total Reduction Ratio
16.13:1
Total Reduction Ratio
16.13:1

Body Hoist

Raise
10.5 s
Lower
11.2 s
Total Cycle Time
21.7 s

Body Capacities

Body 1
14.8 yd³
Body 2 (Standard Body)
18.8 yd3
Body 2 - Standard Body
18.8 yd³
Body 3
22.9 yd³
Wide Body
21.9 yd³
Ejector Body (1)
19.9 yd³
Ejector Body (2)
22.6 yd³

Turning Dimensions

Outside Clearance Radius
337.4 in
Inner Clearance Radius
198 in
Axle Oscillation
10 °
Articulation Angle
42.5 °

Dimensions

Tunnel Clearance Height
157.5 in
Height to Top of Load (2:1)
123.3 in
Loading Height
93.9 in
Overall Height – Body Raised
220.5 in
Height to Top of ROPS
102.4 in
Overall Length
4000.0 in
Wheelbase
204.7 in
Ground Clearance
15.7 in
Dump Clearance
22.0 in
Rear Wheel to Body Raised
41.8 in
Rear Axle to Tail
63.3 in
Max Overall Length
423.0 in
Centerline of Front Axle to Centerline of Hitch
70.9 in
Front Axle to Front Bumper
131.7 in
Height to Top of Body
100.3 in
Overall Tire Width
104.3 in

ROPS

ROPS Standards
ROPS (Roll Over Protection Structure) for cab offered by Caterpillar meets ISO 3471, SAE J1040, AS2294.2, EN13510 ROPS Criteria.
ROPS Standards
ROPS (Roll Over Protection Structure) for cab offered by Caterpillar meets ISO 3471, SAE J1040, AS2294.2, EN13510 ROPS Criteria.
FOPS Standards
FOPS (Falling Objects Protection Structure) meets ISO 3449, SAE J231, AS2294.3, EN13627 FOPS Criteria.
FOPS Standards
FOPS (Falling Objects Protection Structure) meets ISO 3449, SAE J231, AS2294.3, EN13627 FOPS Criteria.

Service Refill Capacities

Engine Crankcase - With Filter
9 gal (US)
Transmission
18.0 gal
Transmission
18 gal (US)
Hydraulic Tank
87.0 gal
Hydraulic Tank
87 gal (US)
Cooling System
20.0 gal
Cooling System
20 gal (US)
Front Differential and Final Drives
15 gal (US)
Rear Differential and Final Drives
15 gal (US)
Fuel Tank
132.0 gal
Fuel Tank
132 gal (US)

Tires

Tire Size
26.5 × R25 VSNT

Brakes

Standards
ISO3450, AS2958.1, CAN-CSA424.30-M90
  • ELECTRICAL
    • 12V power supply in cab
    • Alternator, 95-amp
    • Auxiliary start receptacle
    • Battery disconnect switch, ground level
    • Circuit breaker, 80-amp
    • Corrosive protection spray
    • Diagnostic connector
    • Electric starting, 24V
    • Engine shutdown switch, ground level: – Front left hand side
    • Lighting: – Brake and tail light, LED – Headlights with dimmer switch, halogen – Rear work light (cab mounted), halogen – Reversing lights, halogen
    • Low maintenance batteries
    • Reversing alarm
    • Starting and charging system
  • OPERATOR ENVIRONMENT
    • Cat Electronic Monitoring System (Cat EMS)
    • Electric horns
    • Gauges: – Engine coolant temperature – Transmission coolant temperature – Hydraulic oil temperature – Fuel level – Speedometer – Tachometer
    • Indicator lights: – Alert warning light – Body up position warning – High beam – Residual brake pressure warning – Retarder application – Turn signal
    • Low hydraulic level warning
    • Open operator station ROPS/FOPS structure
    • Operator presence system (auto park brake)
    • Rearview mirrors
    • Suspension seat Cat Comfort TLV2 with retractable seat belt
    • Trainer/passenger seat and seat belt
    • Tilt/telescopic steering wheel
  • POWER TRAIN
    • Cat C15 ATAAC diesel engine, 6-cylinder
    • Automatic brake retarder control
    • Auto shift transmission 4 speed forward/1 speed reverse
    • Axle, arrangement standard width, front – rear
    • Control throttle shifting
    • Engine air intake precleaner
    • Electric fuel priming pump
    • Exhaust, turbo compartment shielding
    • Four wheel drive
    • Long life coolant
    • Programmable ground speed limiting
    • Programmable gear block out with tray up
    • Radiator cap manual release
    • Radiator, cross flow
    • Rims, 5-piece, tubeless
    • SAFR full hydraulic enclosed wet, multiple-disc brakes, oil cooled
    • Torque converter with automatic lockup
  • OTHER STANDARD EQUIPMENT
    • Body, dump, (14.4 m3, 18.8 yd3)
    • Catalytic exhaust purifier/muffler group
    • Centralized lubrication points
    • Decals, international picto graphics
    • Engine and transmission belly guards
    • Fenders, standard with, front, rear flaps
    • Fire wall
    • Fuel system manual shut off tap
    • Frame lifting lugs
    • Front and rear tow pin
    • Hand hold (access on/off top deck)
    • Hitch, articulated and oscillated
    • Operator and Maintenance Manual, English
    • S·O·S port: – Coolant – Engine oil – Hydraulic oil – Transmission oil
    • Swing out radiator grill
    • Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.
  • Battery shutdown
    • Ground level isolation, in cab isolation switch
    • Ground level isolation, engine shutdown switch
    • Ground level isolation, in cab isolation, engine shutdown switch
  • Body dump
    • Body, (11.3 m3, 14.8 yd3)
    • Body, (16.8 m3, 21.9 yd3) wide body configuration
    • Body, (17.5 m3, 22.9 yd3)
  • Body ejector
    • Ejector, (15.2 m3, 19.9 yd3)
    • Ejector, (16.8 m3, 21.9 yd3)
  • Body liners, impact and wear
    • 10 mm (0.4"), body, dump (11.3 m3, 14.8 yd3)
    • 10 mm (0.4"), body, dump (14.4 m3, 18.8 yd3)
    • 10 mm (0.4"), dump (16.8 m3, 21.9 yd3) for wide body configuration
    • 10 mm (0.4"), body, dump (17.5 m3, 22.9 yd3)
  • Engine options
    • Diesel particulate filter (for use with VR engine only)
    • Engine, Ventilation Reduction (VR)
    • Tier 3
  • Fast fill system
    • Coolant
    • Engine oil
    • Fuel (single tank)
    • Hydraulic oil
    • Transmission oil
  • Fire suppression system
    • Ansul, dry powder
    • Foam, water based
  • Fluids
    • Arctic fuel
    • Arctic coolant
  • Lighting
    • Headlights with dimmer switch, LED
    • Rear work light (cab mounted), LED
    • Reversing lights, LED
  • Lubrication system
    • Automatic, dump or ejector body
    • Centralized, ejector body
  • Mine transfer
    • Mine transfer ready front frame (tack welded)
    • Mine transfer ready dump body (tack welded)
    • Mine transfer ready ejector body (tack welded)
  • Operators station ROPS/FOPS enclosed
    • Air conditioning
    • Cab pressurizer and filter
    • Dome light
    • Heater
    • Radio ready compartment for radio and speakers
    • Sun visor
    • Window, sliding cab door
  • Operator and Maintenance Manual
    • Chinese
    • Indonesian
    • French
    • Portuguese
    • Russian
    • Spanish
  • Park brake switch engagement
    • Push to apply
    • Pull to apply
  • Payload
    • Truck Payload Measurement System (TPMS)
    • Remote display for TPMS
  • Rims
    • Rim identification numbering
    • Spare, tubeless
  • Seat
    • Suspension seat Cat Comfort TLV2, vinyl
    • Suspension seat tee, mechanical
  • Seat cover
    • Tee and Cat Comfort TLV2
    • Seat cover, companion
  • Service tools
    • Collet jacking bolts, dump and ejector
    • Diagnostics box
    • Hoist cylinder supports (for body removal)
    • Brake wear gauge
    • Reference parts manual for additional tooling available
  • Switches
    • Engine shutdown, fire suppression activation
    • Idle timer
    • Engine shutdown, fire suppression activation/idle timer
  • Technology
    • Vital Information Management System (VIMS) Gen 3
  • Tire arrangements
    • Tire, 26.5 × 25 VSNT Bridgestone
    • Tire, 26.5 × 25 VSDL Bridgestone