Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Engine Model Cat® C18 ACERT™
Engine Model Cat® C18 ACERT™
Rated Power 1800 r/min
Gross Power - SAE J1995 587 hp

Engine

Engine Model
Cat® C18 ACERT™
Engine Model
Cat® C18 ACERT™
Rated Power
1800 r/min
Gross Power - SAE J1995
587 hp
Gross Power - SAE J1995
587 HP
Net Power – 80/1269/EEC
555.0 hp
Gross Power - VR Engine - SAE J1995
587 HP
Gross Power - Tier 3 Engine - SAE J1995
547 HP
Bore
5.7 in
Bore
5.7 in
Stroke
7.2 in
Stroke
7.2 in
Displacement
1104.53 in3
Displacement
1104.53 in³

Operating Specifications

Gross Machine Mass
187393 lb
Gross Machine Mass
187393 lb
Nominal Payload Capacity
99208 lb
Body Capacities
18.0-25.1 m3 (23.5-32.8 yd3)
Body Capacities
18.0-25.1 m3 (23.5-32.8 yd3)

Weights

Empty
88184 lb
Loaded
187393 lb
Empty - Front Axle
60847 lb
Empty - Rear Axle
27337 lb
Loaded - Front Axle
85451 lb
Loaded - Rear Axle
101942 lb

Weight Distribution

Empty - Front Axle
69%
Empty - Rear Axle
31%
Loaded - Front Axle
45.6%
Loaded - Rear Axle
54.4%

Transmission

Forward 1
4.9 mph
Forward - 1
4.9 mile/h
Forward 2
6.8 mph
Forward - 2
6.8 mile/h
Forward 3
9.4 mph
Forward - 3
9.4 mile/h
Forward 4
12.8 mph
Forward - 4
12.8 mile/h
Forward 5
17.4 mph
Forward - 5
17.4 mile/h
Forward 6
23.7 mph
Forward - 6
23.7 mile/h
Forward 7
32.3 mph
Forward - 7
32.3 mile/h
Reverse 1
4.6 mph
Reverse - 1
4.6 mile/h
Reverse 2
6.3 mph
Reverse - 2
6.3 mile/h

Final Drives

Differential Ratio
3.46:1
Differential Ratio
3.46:1
Final Drive Ratio
5.65:1
Total Reduction Ratio
19.55:1
Total Reduction Ratio
19.55:1

Body Hoist

Raise
16 s
Lower
21 s
Total Cycle Time
37 s

Body Capacities

Ejector Body
29.9 yd3
Ejector Body
29.9 yd³
Dump Body - 1
23.6 yd³
Dump Body - 2 - Standard
27.9 yd³
Dump Body - 3
32.8 yd³

Turning Dimensions

Articulation Angle
42.5º
Articulation Angle
42.5º
Frame Oscillation
10º
Inside Clearance Radius*
209 in
Outside Clearance Radius*
365.8 in
Note
*Clearance dimensions are for reference only.

Service Refill Capacities

Engine Crankcase - With Filter
16.9 gal (US)
Transmission
15.9 gal
Transmission
15.9 gal (US)
Hydraulic Tank
70.3 gal
Hydraulic Tank
70.3 gal (US)
Cooling System
22.5 gal
Cooling System
22.5 gal (US)
Front Differential and Final Drives
20.3 gal (US)
Rear Differential and Final Drives
21.9 gal (US)
Fuel Tank
201.8 gal
Fuel Tank
201.8 gal (US)

Tires

Tire Size
29.5 × R29

Standards

Brakes
ISO 3450, AS2958.1, CAN-CSA424.30-M90
Brakes
ISO 3450, AS2958.1, CAN-CSA424.30-M90
Standards
ROPS/FOPS Certified Cab
Standards
ROPS/FOPS Certified Cab
Cab/FOPS
ISO 3449, SAE J231, AS2294.3, EN13627
Cab - FOPS
ISO 3449, SAE J231, AS2294.3, EN13627
Cab/ROPS
ISO 3471, SAE J1040, AS2294.2, EN13510
Cab - ROPS
ISO 3471, SAE J1040, AS2294.2, EN13510
  • ELECTRICAL
    • 12V power supply in cab
    • Alternator, 95-amp
    • Auxiliary start receptacle
    • Battery disconnect switch, ground level
    • Circuit breaker, 80-amp
    • Corrosive protection spray
    • Diagnostic connector
    • Electric starting, 24V
    • Engine shutdown switch, ground level
      – Front left hand side
    • Lighting
      – Brake and tail light, LED
      – Headlights with dimmer switch, halogen
      – Rear work light (cab mounted), halogen
      – Reversing lights, halogen
    • Low maintenance batteries
    • Reversing alarm
    • Starting and charging system
  • OPERATOR ENVIRONMENT
    • Cat Electronic Monitoring System (Cat EMS)
    • Electric horns
    • Gauges
      – Engine coolant temperature
      – Transmission coolant temperature
      – Hydraulic oil temperature
      – Fuel level
      – Speedometer
      – Tachometer
    • Indicator lights
      – Alert warning light
      – Body up position warning
      – High beam
      – Residual brake pressure warning
      – Retarder application
      – Turn signal
    • Low hydraulic level warning
    • Open operator station ROPS/FOPS structure
    • Operator presence system (auto park brake)
    • Rearview mirrors
    • Suspension seat Cat Comfort TLV2 with retractable seat belt
    • Trainer/passenger seat and seat belt
    • Tilt/telescopic steering wheel
    • Turn signal indicators
  • POWER TRAIN
    • Cat C18 ATAAC diesel engine, 6-cylinder
    • Automatic brake retarder control
    • Auto shift transmission 7 speed forward/2 speed reverse
    • Control throttle shifting
    • Engine air intake precleaner
    • Electric fuel priming pump
    • Exhaust, turbo compartment shielding
    • Four wheel drive
    • Long life coolant
    • Programmable ground speed limiting
    • Programmable gear block out with tray up
    • Radiator cap manual release
    • Radiator, cross flow
    • SAFR full hydraulic enclosed wet, multiple-disc brakes, oil cooled
    • Torque converter, standard with automatic lockup
  • OTHER STANDARD EQUIPMENT
    • Body, dump, (21.3 m³/27.9 yd³)
    • Catalytic exhaust purifier/muffler group
    • Centralized lubrication points
    • Decals, international picto graphics
    • Dual fuel tanks
    • Engine and transmission belly guards
    • Fenders, front, rear flaps
    • Fire wall
    • Fuel system manual shut off tap
    • Front axle suspension
    • Frame lifting lugs
    • Front and rear tow pin
    • Front rubber bumpers
    • Hand hold (access on/off top deck)
    • Hitch, articulated and oscillated
    • Operator and Maintenance Manual, English
    • S·O·S port
      – Coolant
      – Engine oil
      – Hydraulic oil
      – Transmission oil
    • Swing out radiator grill
    • Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.
  • OPTIONAL EQUIPMENT
    • Battery shutdown
      – Ground level isolation, in cab isolation switch
      – Ground level isolation, engine shutdown switch
      – Ground level isolation, in cab isolation, engine shutdown switch
    • Body ejector
      – Ejector, (22.9 m³/30.0 yd³)
    • Body liners, impact and/or wear
      – 10 mm (0.4"), body, dump (18.0 m³/23.5 yd³)
      – 10 mm (0.4"), body, dump (21.3 m³/27.9 yd³)
      – 10 mm (0.4"), body, dump (25.1 m³/32.8 yd³)
      – 10 mm (0.4"), body, ejector, (22.9 m³/30.0 yd³)
    • Body wear plate, external
      – 16 mm (0.62"), body, dump (18.0 m³/23.5 yd³)
      – 16 mm (0.62"), body, dump (21.3 m³/27.9 yd³)
      – 16 mm (0.62"), body, dump (25.1 m³/32.8 yd³)
    • Brake pressure gauges
    • Camera, color rear facing
    • Cover, anti vandalism for shipping
    • Engine options
      – Diesel particulate filter (for use with VR engine only)
      – Engine, Ventilation Reduction (VR)
      – Tier 3
    • Fast fill system
      – Coolant
      – Engine oil
      – Fuel (dual tanks)
      – Hydraulic oil
      – Transmission oil
    • Fire suppression system
      – Ansul, dry powder
      – Foam, water based
    • Fluids
      – Arctic fuel
      – Arctic coolant
    • Lighting
      – Headlights with dimmer switch, LED
      – Rear work light (cab mounted), LED
      – Reversing lights, LED
    • Lubrication system
      – Automatic, dump or ejector body
      – Centralized, ejector body
    • Mine transfer
      – Mine transfer ready front frame (tack welded)
      – Mine transfer ready dump body (tack welded)
      – Mine transfer ready ejector body (tack welded)
    • Operators station ROPS/FOPS enclosed
      – Air conditioning
      – Cab pressurizer and filter
      – Dome light
      – Heater
      – Radio ready compartment for radio and speakers
      – Sun visor
      – Window, sliding cab door
    • Operator and Maintenance Manual
      – Chinese
      – Indonesian
      – French
      – Portuguese
      – Russian
      – Spanish
    • Park brake switch engagement
      – Push to apply
      – Pull to apply
    • Payload
      – Truck Payload Measurement System (TPMS)
      – Remote display for TPMS
    • Reflective tape
    • Rims
      – Rim identification numbering
      – Spare, tubeless
    • Seat
      – Suspension seat Cat Comfort TLV2, vinyl
      – Suspension seat tee, mechanical
    • Seat cover
      – Tee and Cat Comfort TLV2
      – Seat cover, companion
    • Secondary steering system
    • Service tools
      – Collet jacking bolts, dump or ejector
      – Diagnostics box
      – Hoist cylinder supports (for body removal)
      – Brake wear gauge
      – Reference parts manual for additional tooling available
    • Switches
      – Engine shutdown, fire suppression activation
      – Idle timer
      – Engine shutdown, fire suppression activation/idle timer
    • Technology
      – Vital Information Management System (VIMS) Gen 3
    • Tire arrangements
      – Tire, 29.5 × R29 VSNT Bridgestone
      – Tire, 29.5 × R29 VSDL Bridgestone
    • Torque converter, high altitude, 3000 m (9,842 ft) and up
    • NOTE: Not all features are available in all regions. See your Cat dealer for more information.