Chat with us, powered by LiveChat

Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Cat C32 Auxiliary / Diesel Electric Propulsion Engine (IMO III) Specifications
Minimum Rating 352 bhp
Minimum Rating 352 BHP
Maximum Rating 1172 BHP
Aspiration Turbocharged-aftercooled aspiration

Power Rating

Minimum Rating
352 bhp
Minimum Rating
352 BHP
Maximum Rating
1172 BHP

Engine Specifications

Aspiration
Turbocharged-aftercooled aspiration
Aspiration
Turbocharged-aftercooled aspiration
Configuration
Vee 12, 4-stroke-cycle diesel
Bore
5.71 in
Stroke
6.38 in
Displacement
1959 cu in
Rotation
Counterclockwise from flywheel end
Bore
5.71 in
Configuration
Vee 12, 4-stroke-cycle diesel
Displacement
1959 in³
Rotation
Counterclockwise from flywheel end
Stroke
6.38 in
Emissions
IMO III emissions certified (SCR required)
Emissions
IMO III emissions certified (SCR required)
Rated Engine Speed
1500 rpm
Governor
Electronic (A5 ECM)
Refill Capacity
Lube Oil System w/ oil filter change: 146 L (38.5 gal) - deep pan
Oil Change Interval
750 hrs - deep pan
Cooling
Heat exchanger or keel cooled
Flywheel Housing
SAE No. 0 with SAE No. 18 flywheel (136 teeth)
Cooling
Heat exchanger or keel cooled
Flywheel Housing
SAE No. 0 with SAE No. 18 flywheel (136 teeth)
Governor
Electronic (A5 ECM)
Oil Change Interval
750 hrs - deep pan
Rated Engine Speed
1500 rpm
Refill Capacity
Lube Oil System w/ oil filter change: 146 L (38.5 gal) - deep pan

Dimensions & Weights

Minimum Length
83.9 in
Maximum Length
89.8 in
Minimum Height
59.3 in
Maximum Height
63.5 in
Minimum Width
57.1 in
Maximum Width
57.3 in
Minimum Engine Dry Weight
6950 lb
Maximum Engine Dry Weight
7160 lb
Maximum Engine Dry Weight
7160 lb
Maximum Height
63.5 in
Maximum Length
89.8 in
Maximum Width
57.3 in
Minimum Engine Dry Weight
6950 lb
Minimum Height
59.3 in
Minimum Length
83.9 in
Minimum Width
57.1 in

Clean Emissions Module (CEM) – Dimensions

6 Brick Z-Flow - Length
147.7 in
6 Brick Z-Flow - Height
23.5 in
6 Brick Z-Flow - Width
43.5 in
6 Brick Z-Flow - Weight
1246 lb
6 Brick U-Flow - Length
85.0 in
6 Brick U-Flow - Height
23.5 in
6 Brick U-Flow - Width
56.9 in
6 Brick U-Flow - Weight
1235 lb
Dosing Cabinet - Length
37.4 in
Dosing Cabinet - Height
22.8 in
Dosing Cabinet - Width
18.8 in
Dosing Cabinet - Weight
209 lb

Clean Emissions Module (CEM) - Dimensions

6 Brick U-Flow - Height
23.5 in
6 Brick U-Flow - Length
85 in
6 Brick U-Flow - Weight
1235 lb
6 Brick U-Flow - Width
56.9 in
6 Brick Z-Flow - Height
23.5 in
6 Brick Z-Flow - Length
147.7 in
6 Brick Z-Flow - Weight
1246 lb
6 Brick Z-Flow - Width
43.5 in
Dosing Cabinet - Height
22.8 in
Dosing Cabinet - Length
37.4 in
Dosing Cabinet - Weight
209 lb
Dosing Cabinet - Width
18.8 in
  • AIR INLET SYSTEM
    • Separate circuit aftercooled (SCAC)
    • Closed crankcase fumes disposal
  • CONTROL SYSTEM
    • 24V control system
  • COOLING SYSTEM
    • Heat exchanger or Keel Cooling
    • Watercooled exhaust manifold and turbocharger
    • Hard seawater lines – no flexible hoses
    • Flanges for cooling connections, ANSI or DIN
  • FUEL SYSTEM
    • Duplex fuel filters with hybrid fuel lines
    • Shipped loose primary fuel filter with water separator
    • Fuel transfer and priming pump
  • LUBE SYSTEM
    • Oil fill, simplex filter and dipstick
    • Deep or shallow sump oil pan
  • MOUNTING SYSTEM
    • Adjustable front support mounting system
  • GENERAL
    • Right or left hand service sides
    • Customer wiring and service tool connector
  • ALARM AND PROTECTION
    • MECP I control panel
    • MECP III control panel with Cat® Alarm and Protection System
  • EXHAUST SYSTEM
    • Water-in-fuel and exhaust temperature sensors
    • Muffler
  • CHARGING SYSTEM
    • Charging alternator
  • FUEL SYSTEM
    • Manual or electric fuel priming pump
    • Fuel cooler
  • LUBE SYSTEM
    • Duplex oil filters
  • POWER TAKE-OFFS
    • Front drives including stub shaft and pump drive
    • Rear SAE A or B pump drives
  • STARTING SYSTEM
    • Starting motors – air, electric or redundant