Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Minimum Power 1900.0 bhp
Minimum Power 1900 BHP
Maximum Power 1985.0 bhp
Maximum Power 1985 BHP

Power Rating

Minimum Power
1900.0 bhp
Minimum Power
1900 BHP
Maximum Power
1985.0 bhp
Maximum Power
1985 BHP
Rated Speed
1460-1750 rpm
Rated Speed
1460-1750 rpm

Emission Standards

Emissions
Non-Certified. Available for global non-regulated areas. Not FM Approved. Not UL Listed
Emissions
Non-Certified. Available for global non-regulated areas. Not FM Approved. Not UL Listed

General

Engine Configuration
V-16, 4-Stroke-Cycle Diesel
Bore
170 mm (6.7 in)
Stroke
190 mm (7.5 in)
Displacement
69 L (4210 in³)
Aspiration
Turbocharged Aftercooled (TA)
Aspiration
Turbocharged Aftercooled (TA)
Compression Ratio
13.0:1
Compression Ratio
13.0:1
Rotation (from flywheel end)
Counterclockwise
Rotation from Flywheel End
Counterclockwise

Engine Dimensions - Approximate

Height
1902.4 mm (74.9 in)
Length
3730.4 mm (146.9 in)
Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments)
8074 kg (17800 lb)
  • Air Inlet System
    • Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
    • Turbocharger, rear mounted
    • Jacket water aftercooled
  • Control System
    • Charging alternator 24 volt, 35 amp
    • Governor, RH, 3161 with self contained synthetic oil sump
    • Air-fuel ratio control
    • Mechanical speed control, without torque control
    • Governor control
    • Positive locking
  • Cooling System
    • Thermostats and housing
    • Jacket water pump, centrifugal
  • Exhaust System
    • Exhaust manifold, dry
  • Flywheels and Flywheel Housing
    • SAE No. 0 flywheel
    • 151 flywheel teeth
    • SAE No. 0 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Fuel filter, with service indicators, cartridge type with RH service
    • Fuel transfer pump
  • Instrumentation
    • Instrument Panel, RH
    • Engine oil pressure gauge
    • Fuel pressure gauge
    • Oil filter differential gauge
    • Jacket water temperature gauge
    • Service meter, electric
    • Tachometer
  • Lube System
    • Crankcase breather, top mounted
    • Oil cooler
    • Oil filler
    • Oil dipstick
    • Oil pump
    • Oil filter, cartridge type with RH service
    • Shallow oil pan
    • Fumes disposal (not installed)
  • Mounting System
    • Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
    • Included on selected top level engines
  • Power Take Off
    • Accessory drive, upper RH
    • Front housing, single sided
  • Protection System
    • Junction box
    • Manual shutoff, RH
    • Safety shutoff protection, energized to shutdown
    • Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
    • Water temperature
    • Overspeed
    • 3161 governor solenoid energized to shutdown
  • Starting System
    • Starting switch
  • General
    • Vibration damper
    • Lifting eyes
    • Paint: Caterpillar yellow, with optional colors available at request