Chat with us, powered by LiveChat

Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
3512B Diesel Generator Set Specifications
Minimum Rating 1230 ekW (1320kVA)
Maximum Rating 1500 ekW (1875 kVA)
Voltage 220 to 13800 Volts
Frequency 50 or 60 Hz

Generator Set Specifications

Minimum Rating
1230 ekW (1320kVA)
Maximum Rating
1500 ekW (1875 kVA)
Voltage
220 to 13800 Volts
Frequency
50 or 60 Hz
Speed
1500 or 1800 RPM

Generator Set Configurations

Emissions/Fuel Strategy
Low Fuel Consumption, Low Emissions

Engine Specifications

Engine Model
3512B TA, V-12, 4-Stroke Water-Cooled Diesel
Compression Ratio
14.0:1 Std 15.5:1 HD
Aspiration
TA
Governor Type
Adem™3
Fuel System
Electronic Unit Injection
Bore
6.69 in
Displacement (Std)
3161.03 in3
Displacement (HD)
3573.55 in3
Stroke (Std)
7.48 in
Stroke (HD)
8.46 in
  • Air Inlet
    • Air Cleaner
  • Cooling
    • Package mounted radiator (except C175)
  • Exhaust
    • Exhaust flange outlet
  • Fuel
    • Primary fuel filter with integral water separator
    • Secondary fuel filter
    • Fuel priming pump
  • Generator
    • Matched to the performance and output characteristics of Cat engines
    • IP23 Protection
  • Power Termination
    • Bus Bar
  • Control Panel
    • EMCP 4 Genset Controller
  • General
    • Paint - Caterpillar Yellow except rails and radiators gloss black
  • Exhaust
    • Exhaust mufflers
  • Generator
    • Anti-condensation heater
    • Internal excitation (IE)
    • Permanent magnet excitation (PMG)
    • Oversize and premium generators
  • Power Termination
    • Circuit breakers, UL listed
    • Circuit breakers, IEC compliant
  • Control Panels
    • EMCP 4.2
    • EMCP 4.3
    • EMCP 4.4
    • Generator temperature monitoring & protection
    • Load share module
    • Digital I/O module
    • Remote monitoring software
  • Mounting
    • Rubber anti-vibration mounts
    • Spring-type vibration isolator
    • IBC isolators
  • Starting/Charging
    • Battery chargers
    • Oversize batteries
    • Jacket water heater
    • Heavy-duty starting system
    • Charging alternator
    • Air starting motor with control and silencer
  • General
    • The following options are based on regional and product configuration:
    • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
    • UL 2200 package
    • EU Certificate of Conformance (CE)
    • CSA Certification
    • EEC Declaration of Conformity
    • Enclosures: sound attenuated, weather protective
    • Automatic transfer switches (ATS)
    • Integral & sub-base fuel tanks
    • Integral & sub-base UL listed dual wall fuel tanks