Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
XG135 Specifications
Rating 135 ekW (170 kVA) Continuous
Rating 135 ekW (170 kVA) Continuous
Frequency 60Hz
Frame Size 445 SR4B

Generator

Rating
135 ekW (170 kVA) Continuous
Rating
135 ekW (170 kVA) Continuous
Frequency
60Hz
Frame Size
445 SR4B
Pitch
0.75
No. of poles
4
Excitation
PM excited
Coastal Protection
Yes
Enclosure
Drip proof IP23
Temperature rise
90 deg C
Alignment
Pilot shaft
Voltage
208 - 480 V
Voltage
208 - 480 V
Overspeed capability – % of rated
125% of rated
Voltage regulator
3 phase sensing with Volts-per-Hertz
Voltage regulation.
Less than ± 0.5% voltage gain - Adjustable to compensate for engine speed droop and line loss
Wave form deviation
Less than 5%
Telephone Influence Factor (TIF).
Less than 50
Harmonic Distortion (THD)
Less than 5%

Technical Data

Power Rating
169 KVA
Performance Specification
DM9398
Engine Speed
1800
Lubricating System - Oil pan capacity
11.9 gal
Fuel System - Fuel consumption - 100% Load
8083 Btu/hp-hr
Fuel System - Fuel consumption - 75% Load
8455 Btu/hp-hr
Fuel System - Fuel consumption - 50% Load
9311 Btu/hp-hr
Cooling System - Ambient Capability at 25 deg C (77 deg F)
101 °F
Cooling System - Altitude Capability @ Max. Ambient Capability
270 m
Cooling System - Coolant Capacity
20 gal
Air Requirements - Combustion air flow
302 cfm
Exhaust System - Exhaust stack temperature
1068 °F
Exhaust System - Exhaust flow (at stack temperature)
964 cfm
Sound Performance - Noise Rating @ 7 meters per SAE J1074
75 dB (A)
Emissions Data - NOx (as NO2)
0.50 g/hp-hr
Emissions Data - CO
2.00 g/hp-hr
Emissions Data - THC
1.05 g/hp-hr
Emissions Data - NMHC
0.16 g/hp-hr
Emissions Data - CO2
496 g/hp-hr
Emissions Data - Exhaust O2
% 0.0

Dimension

Width (without Trailer)
61 in
Height (without Trailer)
103 in
Length (without Trailer)
197 in
Weight (wo/Trailer) w/Lube, Oil and coolant
10550 lb
Width (with Trailer)
90
Height (with Trailer)
126
Weight (w/ Trailer) w/ Lube, Oil and Coolant
17074 lb

Engine

Number of Cylinders
In-Line 6
Type
4-Stroke-Cycle, Spark Ignited
Bore – mm (in)
121 (4.75)
Stroke – mm (in)
152 (6.0)
Displacement – L (cu in)
10.5 (641)
Engine
CAT G3306 TA Gas Engine
Engine
CAT G3306 TA Gas Engine
Compression ratio
8:1
Fuel
Natural Gas
Engine Speed (rpm)
1800
Fuel
Natural Gas
Aspiration
Turbocharged Aftercooled
Governor
Electronic ADEM A4
Aftercooler Inlet (deg C)
54
Jacket Water Inlet (deg C)
99
Cooling System
Separate Circuit
Minimum Inlet Fuel Pressure (PSI)
12 - 25
Minimum Methane Number
30

Dimensions

Length - With Trailer
274 in
Height - With Trailer
126 in
Weight - With Trailer, Lube, Oil and Coolant
17074 lb
Width - With Trailer
90 in
  • Engine
    • G3306B TA, I-6, 4-stroke-cycle, gas engine
  • Air Inlet
    • Single element, canister-type air cleaner with service indicator
  • Generator
    • SR4B 445 frame, three-phase, 480V, random wound, 12-lead design, permanent magnet excited, 0.750 pitch – Class H Coastal insulation protection.
  • Charging System
    • UL/CSA listed 120V, 20 Amp battery charger, shock mounted and enclosed in dust proof housing
  • Control Panel
    • EMCP 4.4 genset mounted controller
  • Cooling System
    • Heavy-duty split core cooling system with low power draw and high ambient capability
  • Distribution System
    • NEMA 1 steel enclosure, separate hinged, lockable door with rust resistant pinned hinges
  • Enclosure
    • Sound attenuating, 12 gauge sheet metal enclosure limits overall noise to 75 dB(A) @ 7m
  • Exhaust System
    • Catalyst w/spark arresting muffler
  • Fuel System
    • Dedicated Fuel trains for natural gas and propane fuels including gas pressure regulator.
  • Lube System
    • Pump, integral oil cooler, lube oil, filter, filler and dipstick, and oil sampling valve
  • Mounting System
    • Generator set soft mounted to the heavy duty, fabricated steel base frame
  • Starting System
    • Single electric starting motor, 24VDC
  • General
    • Factory testing of standard generator set