Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Minimum Rating 950.0 bhp
Minimum Rating 950 BHP
Maximum Rating 1065.0 bhp
Maximum Rating 1065 BHP

Engine Specifications

Minimum Rating
950.0 bhp
Minimum Rating
950 BHP
Maximum Rating
1065.0 bhp
Maximum Rating
1065 BHP
Emissions
Non-certified
Emissions
Non-certified
Bore
6.7 in
Bore
6.7 in
Stroke
7.5 in
Stroke
7.5 in
Displacement
2105.0 in3
Displacement
2105 in³
Aspiration
Turbocharged Aftercooled
Aspiration
Turbocharged Aftercooled
Engine Weight - Net Dry
11806 lb
Rotation (from flywheel end)
Counterclockwise
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
151

Capacity for Liquids

Lube Oil System - Refill
30 gal (US)
Cooling System - Engine
60 gal (US)

Dimensions

Length
92.5 in
Length
92.5 in
Width
68.7 in
Width
68.7 in
Height
74.9 in
Height
74.9 in
  • Air Inlet System
    • Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
    • Turbocharger, rear mounted
    • Jacket water aftercooled
  • Control System
    • Charging alternator 24 volt, 35 amp
    • Governor, RH, 3161 with self contained synthetic oil sump
    • Air-fuel ratio control
    • Mechanical speed control, without torque control
    • Governor control
    • Positive locking
  • Cooling System
    • Thermostats and housing
    • Jacket water pump, centrifugal
  • Exhaust System
    • Exhaust manifold, dry
  • Flywheels and Flywheel Housing
    • SAE No. 0 flywheel
    • 151 flywheel teeth
    • SAE No. 0 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Fuel filter, with service indicators, cartridge type with RH service
    • Fuel transfer pump
  • Instrumentation
    • Instrument Panel, RH
    • Engine oil pressure gauge
    • Fuel pressure gauge
    • Oil filter differential gauge
    • Jacket water temperature gauge
    • Service meter, electric
    • Tachometer
  • Lube System
    • Crankcase breather, top mounted
    • Oil cooler
    • Oil filler
    • Oil dipstick
    • Oil pump
    • Oil filter, cartridge type with RH service
    • Shallow oil pan
    • Fumes disposal (not installed)
  • Mounting System
    • Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
    • Included on selected top level engines
  • Power Take Off
    • Accessory drive, upper RH
    • Front housing, single sided
  • Protection System
    • Junction box
    • Manual shutoff, RH
    • Safety shutoff protection, energized to shutdown
    • Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
    • Water temperature
    • Overspeed
    • 3161 governor solenoid energized to shutdown
  • Starting System
    • Starting switch
  • General
    • Vibration damper
    • Lifting eyes
    • Paint: Caterpillar yellow, with optional colors available at request
  • Cooling System
    • Emergency water connections
  • Exhaust System
    • Flexible fitting
    • Exhaust elbow
    • Exhaust flange
  • Fuel System
    • Primary fuel filter - cartridge type
  • Lubrication System
    • Oil level regulator
  • Power Take-off
    • Two-sided front housing
    • Front, upper left-hand accessory drive
    • Front, lower left-hand accessory drive
    • Auxiliary drive shaft
    • Auxiliary drive pulley
  • Starting System
    • Battery - 24V
    • Battery rack