Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
G3516B LE Gas Engine Specifications
Minimum Rating 1380.0 bhp
Minimum Rating 1380 BHP
Maximum Rating 1380.0 bhp
Maximum Rating 1380 BHP

Engine Specifications

Minimum Rating
1380.0 bhp
Minimum Rating
1380 BHP
Maximum Rating
1380.0 bhp
Maximum Rating
1380 BHP
Emissions
NSPS Site Compliant Capable
Emissions
NSPS Site Compliant Capable
Displacement
4230.0 in3
Displacement
4230 in³
Aspiration
Turbocharged-2 Stage Aftercooled
Aspiration
Turbocharged-2 Stage Aftercooled
Flywheel and Flywheel Housing
SAE No. 00
Flywheel and Flywheel Housing
SAE No. 00
Flywheel Teeth
183
Flywheel Teeth
183
Weight - Dry
18520 lb
Oil Change Interval
1000 hr
Oil Change Interval
1000 hr
Ignition, Protection
ADEM™ A3
Stroke
7.5 in
Stroke
7.5 in
Bore
6.7 in
Bore
6.7 in

Capacity for Liquids

Cooling System
58.5 gal
Cooling System
58.5 gal (US)
Lube Oil System (refill)
112.0 gal
Lube Oil System - Refill
112 gal (US)
  • Air Inlet System
    • Axial flow air cleaners
    • Service indicator
    • Cleanable
  • Cooling System
    • Two-stage charge air cooling:
    • Engine cooling and charge air cooling thermostats
  • Exhaust System
    • Dry exhaust manifolds and turbocharger housings
  • Flywheels and Housings
    • SAE 00 flywheel
    • SAE 00 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Electronic fuel metering valve
    • Requires 7-50 psig gas supply
    • Gas pressure regulator
    • Gas shutoff valve
  • Instrumentation
    • Remote-mounted Advisor control panel
    • Interconnect harness
  • Lube System
    • Top-mounted crankcase breathers
    • Oil cooler
    • Oil filter and oil sampling valve
    • Drain valve
    • Turbo oil accumulator
    • API B16.3 approved gas/air-driven pre-lube system
  • Torsional Vibration Analysis
    • Caterpillar provided
  • Mounting
    • Rails
  • Control Panels
    • 4" LCD Advisor display panel
    • Shipped loose
  • Starting System
    • 90 psi TDI starter
    • 150 psi TDI starter
  • Power Take-Offs
    • Front housing, two sided
    • Front lower LH accessory drive
  • Protection System — Display/Alarm/Shutdown
    • Low oil pressure
    • Oil filter differential pressure
    • High fuel or oil temperature
    • Engine oil to engine coolant
    • Differential temperature
    • High coolant temperature
    • Engine speed
    • Engine load
    • Battery voltage
    • Detonation
    • Manifold air temperature
    • Coolant JW inlet/outlet pressure
    • Left turbo inlet temperature
    • Right turbo inlet temperature
    • Cylinder port temperature
  • Protection System — Display Only
    • Service hours
    • Oxygen level
  • General
    • Paint — Cat yellow
    • Dual 23" vibration damper with guard
    • CSA Certification, Class 1 Division 2 Groups C and D
  • Air Inlet System
    • Rectangular air inlet adapter
    • Circular air inlet adapter
  • Charging System
    • Battery Charger 20 amp
  • Connections
    • Mechanical joint assembly
    • Inlet connection
  • Exhaust System
    • Flexible fittings available at first production build
    • Elbows and mufflers
  • Instrumentation
    • Optional interconnect harness
  • Lube System
    • Shipped with lube oil
  • Mounting System
    • Rails
  • Power Take-Offs
    • Front stub shaft
  • Literature
    • Options available