Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Minimum Rating 1875.0 bhp
Minimum Rating 1875 BHP
Maximum Rating 2010.0 bhp
Maximum Rating 2010 BHP

Engine Specifications

Minimum Rating
1875.0 bhp
Minimum Rating
1875 BHP
Maximum Rating
2010.0 bhp
Maximum Rating
2010 BHP
Emissions
NSPS Site Compliant Capable
Emissions
NSPS Site Compliant Capable
Displacement
7762.0 in3
Displacement
7762 in³
Compression Ratio
9.2:1
Compression Ratio
9.2:1
Aspiration
Turbocharged-Aftercooled
Aspiration
Turbocharged-Aftercooled
Rotation (from flywheel end)
Counterclockwise
Rotation from Flywheel End
Counterclockwise
Flywheel Teeth
255
Flywheel Teeth
255
Weight - Dry
36883 lb
Oil Change Interval
5000 hours
Oil Change Interval
5000 hours
Ignition, Protection
Electronic (ADEM™ A4)
Stroke
11.8 in
Stroke
11.8 in
Bore
11.8 in
Bore
11.8 in

Capacity for Liquids

Cooling System
124.0 gal
Cooling System
124 gal (US)
Lube Oil System (refill)
187.0 gal
Lube Oil System - Refill
187 gal (US)
  • Air Inlet System
    • Air cleaner — standard-duty inlet air adapter
  • Control System
    • A4 control system — provides electronic governing integrated with air/fuel ratio control and individual cylinder ignition timing control
    • Electrical system and instrumentation certified for Class I, Division 2, Group D hazardous location. Includes entire ADEM A4 system and optional control panel.
  • Cooling System
    • Jacket water pump
    • Jacket water thermostats and housing
    • Aftercooler/oil cooler pump
    • Aftercooler/oil cooler thermostats and housing
    • Two-stage aftercooler
    • Jacket water heater connections
    • Standard ANSI connections
  • Exhaust System
    • Dry exhaust manifolds
    • Single vertical outlet adapter
    • Stainless steel encapsulated insulation
  • Flywheels and Flywheel Housing
    • SAE standard rotation
  • Fuel System
    • Gas admission valves -- electronically controlled fuel supply pressure
  • Ignition System
    • A4 control system — senses individual cylinder detonation and controls individual cylinder timing
  • Lube System
    • Crankcase breathers (top mounted)
    • Oil cooler
    • Oil filter
    • Oil pan drain valves -- front and rear
  • Mounting System
    • Engine mounting feet (six total)
  • Protection
    • Electronic shutoff system with purge cycle
    • Crankcase explosion relief valves
    • Gas shutoff valve
  • Starting System
    • Air starting system
  • General
    • Paint — Cat yellow
    • Vibration dampers
  • Air Inlet System
    • Heavy-duty air cleaner with precleaners
  • Charging System
    • 35 Amp & 65 Amp charging alternators – CSA approved
  • Exhaust System
    • Flexible bellows adapters
    • Exhaust expander
    • Weld flanges
  • Fuel System
    • Fuel filter
    • Gas pressure regulator
    • Flexible connection
  • Instrumentation
    • LCD display panel
    • Remote data monitoring and speed control
    • Color HMI display
    • Compatible with Cat® Electronic Technician (ET) and Data View
    • Modbus and Ethernet capable
  • Lube System
    • Air or electric motor-driven prelube
    • Duplex oil filter
    • RH Service
    • Lube oil makeup system
  • Mounting System
    • Mounting plates (set of four)
    • Extra mounting feet (set of two)
    • Extra mounting plates (set of two)
  • Power Take-Offs
    • Front stub shafts
  • Starting System
    • Air pressure reducing valve
  • General
    • Engine barring device
    • Damper guard