Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Cat® G3412 Industrial Gas Engine Specifications
Minimum Power 600.0 bhp
Minimum Power 600 BHP
Maximum Power 637.0 bhp
Maximum Power 637 BHP

Power Rating

Minimum Power
600.0 bhp
Minimum Power
600 BHP
Maximum Power
637.0 bhp
Maximum Power
637 BHP
Frequency
1800 rpm

General

Bore
137 mm (5.4 in)
Bore
137 mm (5.4 in)
Stroke
152 mm (6.0 in)
Stroke
152 mm (6.0 in)
Displacement
27 L (1649³)
Displacement
27 L (1649³)
Aspiration
Turbocharged Aftercooled (TA)
Engine Configuration
Engine - Continuous
Aspiration
Turbocharged Aftercooled (TA)
Engine Configuration
Engine - Continuous

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Height
1960 mm (77 in)
Width
1598 mm (63 in)
Length
2442 mm (96 in)

Engine Dimensions - Approximate

Weight - Net Dry
2141 kg (4720 lb)
Width
1598 mm (63 in)
Height
1960 mm (77 in)
Length
2442 mm (96 in)
  • Air Inlet System
    • Air cleaner — single element with service indicator
  • Control System
    • Governor — Woodward PSG mechanica
    • Governor control — positive locking
  • Cooling System
    • Thermostats and housing
    • Jacket water pump
    • Aftercooler water pump
    • Aftercooler core
  • Exhaust System
    • Watercooled exhaust manifolds
    • Dry exhaust elbow
  • Flywheel & Flywheel Housing
    • SAE No. 0 flywheel
    • SAE No. 0 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Gas pressure regulator
    • Natural gas carburetor
  • Ignition System
    • Digital ignition system
  • Instrumentation
    • Service meter
  • Lube System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Auxiliary oil reservoir
    • Rear sump oil pan
    • Oil filler in valve cover and dipstick — RH
  • Mounting System
    • Engine supports
  • Protection System
    • Shutoff
  • General
    • Paint — Cat yellow
    • Crankshaft vibration damper and drive pulleys
    • Lifting eyes
  • Air Inlet System
    • Air cleaner
    • Air inlet adapter
    • Precleaner
    • Air cleaner rain cap
  • Charging System
    • Battery chargers
    • Charging alternators
    • Ammeter gauge
    • Ammeter gauge and wiring
    • Control mounting
  • Control System
    • EG3P/2301A speed control governor
    • PSG electric governor
    • PSG pneumatic governor
  • Cooling System
    • Radiators
    • Blower fan and fan drives for customer suppliedradiators
    • ATAAC conversion
    • Aftercooler
    • Expansion tank
    • Heat exchanger
  • Exhaust System
    • Flexible fittings
    • Elbows
    • Flanges
    • Rain caps
    • Mufflers
  • Fuel System
    • Dual gas regulator
    • Low energy fuel carburetor
    • Low pressure gas conversion
    • Propane and natural gas valve and jet kits
    • Fuel filter
  • Ignition System
    • CSA ignition
    • Ignition ground wiring harness
    • Power supply — digital ignition system
  • Instrumentation
    • Alarm module
    • Gauges and instrument panels
  • Lube System
    • Auxiliary oil reservoir removal
    • Lubricating oil
  • Mounting System
    • Vibration isolators
  • Power Take-Offs
    • Auxiliary drive pulleys
    • Enclosed clutch
    • Clutch support
    • Front stub shaft
    • Flywheel stub shaft
    • Pulley removal
  • Protection System
    • Gas valves
    • Status control box interconnect wiring harness
  • Starting System
    • Air starting motor
    • Electric air start control
    • Air pressure regulator
    • Air silencer
    • Electric starting motors — single 24-volt
    • Starting aids
    • Battery sets (24-volt dry), cables, and rack
  • General
    • Tool set
    • Digital diagnostic tool