Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Minimum Power 660.0 bhp
Minimum Power 660 BHP
Maximum Power 1380.0 bhp
Maximum Power 1380 BHP

Power Rating

Minimum Power
660.0 bhp
Minimum Power
660 BHP
Maximum Power
1380.0 bhp
Maximum Power
1380 BHP
Frequency
1200-1400 rpm

General

Bore
170 mm (6.7 in)
Bore
170 mm (6.7 in)
Stroke
190 mm (7.5 in)
Stroke
190 mm (7.5 in)
Displacement
69 L (4211 in³)
Displacement
69 L (4211 in³)
Aspiration
Naturally Aspirated (NA), Turbocharged Aftercooled (TA)
Engine Configuration
Engine - Continuous
Aspiration
Naturally Aspirated (NA), Turbocharged Aftercooled (TA)
Engine Configuration
Engine - Continuous

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Height
2286 mm (90 in)
Width
1844 mm (73 in)
Length
3400 mm (133 in)

Engine Dimensions - Approximate

Weight - Net Dry
8401 kg (18520 lb)
Width
1844 mm (73 in)
Height
2286 mm (90 in)
Length
3400 mm (133 in)
  • Air Inlet System
    • Axial flow air cleaners
    • Service indicator
    • Cleanable
  • Cooling System
    • Two-stage charge air cooling:
    • Engine cooling and charge air cooling thermostats
  • Exhaust System
    • Dry exhaust manifolds and turbocharger housings
  • Flywheels and Housings
    • SAE 00 flywheel
    • SAE 00 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Electronic fuel metering valve
    • Requires 7-50 psig gas supply
    • Gas pressure regulator
    • Gas shutoff valve
  • Instrumentation
    • Remote-mounted Advisor control panel
    • Interconnect harness
  • Lube System
    • Top-mounted crankcase breathers
    • Oil cooler
    • Oil filter and oil sampling valve
    • Drain valve
    • Turbo oil accumulator
    • API B16.3 approved gas/air-driven pre-lube system
  • Torsional Vibration Analysis
    • Caterpillar provided
  • Mounting
    • Rails
  • Control Panels
    • 4" LCD Advisor display panel
    • Shipped loose
  • Starting System
    • 90 psi TDI starter
    • 150 psi TDI starter
  • Power Take-Offs
    • Front housing, two sided
    • Front lower LH accessory drive
  • Protection System — Display/Alarm/Shutdown
    • Low oil pressure
    • Oil filter differential pressure
    • High fuel or oil temperature
    • Engine oil to engine coolant
    • Differential temperature
    • High coolant temperature
    • Engine speed
    • Engine load
    • Battery voltage
    • Detonation
    • Manifold air temperature
    • Coolant JW inlet/outlet pressure
    • Left turbo inlet temperature
    • Right turbo inlet temperature
    • Cylinder port temperature
  • Protection System — Display Only
    • Service hours
    • Oxygen level
  • General
    • Paint — Cat yellow
    • Dual 23" vibration damper with guard
    • CSA Certification, Class 1 Division 2 Groups C and D
  • Air Inlet System
    • Rectangular air inlet adapter
    • Circular air inlet adapter
  • Charging System
    • Battery Charger 20 amp
  • Connections
    • Mechanical joint assembly
    • Inlet connection
  • Exhaust System
    • Flexible fittings available at first production build
    • Elbows and mufflers
  • Instrumentation
    • Optional interconnect harness
  • Lube System
    • Shipped with lube oil
  • Mounting System
    • Rails
  • Power Take-Offs
    • Front stub shaft
  • Literature
    • Options available