Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Minimum Power 1998.0 bhp
Minimum Power 1998 BHP
Maximum Power 2481.0 bhp
Maximum Power 2481 BHP

Power Rating

Minimum Power
1998.0 bhp
Minimum Power
1998 BHP
Maximum Power
2481.0 bhp
Maximum Power
2481 BHP
Rated Speed
750-1000 rpm
Rated Speed
750-1000 rpm

Emission Standards

Emissions
Non-certified
Emissions
Non-certified

General

Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
280 mm (11 in)
Bore
280 mm (11 in)
Stroke
300 mm (11.8 in)
Stroke
300 mm (11.8 in)
Displacement
110.8 L (6764 in³)
Aspiration
Turbocharged Aftercooled
Aspiration
Turbocharged Aftercooled
Displacement
110.8 L (6764 in³)
Compression Ratio
13:1
Compression Ratio
13:1
Rotation (from flywheel end)
Counterclockwise
Rotation from Flywheel End
Counterclockwise

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
3988 mm (157 in)
Width
1748 mm (69 in)
Height
2626 mm (103 in)
Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
15,680 kg (34,500 lb)

Engine Dimensions - Approximate

Height
2626 mm (103 in)
Length
3988 mm (157 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
15,680 kg (34,500 lb)
Width
1748 mm (69 in)
  • Air Inlet System
    • Aftercooler core, corrosion resistant coated (air side)
    • Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
    • Turbocharger, rear mounted
    • Jacket water aftercooled
  • Control System
    • Governor, RH, 3161 with self contained synthetic oil sump
    • Air-fuel ratio control
    • Mechanical speed control, without torque control
    • Governor control
    • Positive locking
  • Cooling System
    • Thermostats and housing
    • Jacket water pump, centrifugal
  • Exhaust System
    • Exhaust manifold, dry
  • Flywheels and Flywheel Housing
    • SAE No. 00 flywheel
    • 183 flywheel teeth
    • SAE No. 00 flywheel housing
  • Fuel System
    • Fuel filter, with service indicators, cartridge type with RH service
    • Fuel transfer pump
  • Instrumentation
    • Instrument Panel, RH
    • Engine oil pressure gauge
    • Fuel pressure gauge
    • Oil filter differential gauge
    • Jacket water temperature gauge
    • Service meter, electric
    • Tachometer
  • Lube System
    • Crankcase breather, top mounted
    • Oil cooler
    • Oil filler
    • Oil dipstick
    • Oil pump
    • Oil filter, cartridge type with RH service
    • Shallow oil pan
  • Mounting System
    • Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
  • Power Take Off
    • Accessory drive, upper RH
    • Front housing, single sided
  • Protection System
    • Junction box
    • Manual shutoff, RH
    • Safety shutoff protection, energized to shutdown
    • Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
    • Water temperature
    • Overspeed
    • 3161 governor solenoid energized to shutdown
  • Starting System
    • Starting switch
  • General
    • Vibration damper
    • Lifting eyes
    • Paint: Caterpillar yellow, with optional colors available at request