Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Cat® C1.6 Diesel Engine Specifications
Minimum Power 33.0 bhp
Maximum Power 35.5 bhp
Rated Speed 2800 & 3000 rpm
Emissions U.S. EPA Tier 4 Interim Equivalent

Power Rating

Minimum Power
33.0 bhp
Maximum Power
35.5 bhp
Rated Speed
2800 & 3000 rpm

Emission Standards

Emissions
U.S. EPA Tier 4 Interim Equivalent

General

Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
Bore
77 mm (3.03 in)
Stroke
81 mm (3.19 in)
Displacement
1.508 L (92 in³)
Aspiration
Naturally Aspirated (NA)
Compression Ratio
22.9:1
Combustion System
Indirect Injection
Rotation (from flywheel end)
Counterclockwise
Lube System (refill)
6.5 L (6.9 qt)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
591 mm (23.3 in)
Width
420 mm (16.5 in)
Height
576 mm (22.7 in)
Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
106.8 kg (235.5 lb)
  • Air Inlet System
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator 12 volt 40 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Choice of cooling fans
  • Flywheel & Flywheel Housing
    • SAE No. 6 1/2 flywheel
    • Choice of SAE No. 5 or standard backplate flywheel housing
  • Fuel System
    • Fuel injection pump
    • Spin-on fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
    • Paint: Caterpillar yellow, with optional colors available at request