Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Minimum Power 225.0 bhp
Minimum Power 225 BHP
Maximum Power 300.0 bhp
Maximum Power 300 BHP

Power Rating

Minimum Power
225.0 bhp
Minimum Power
225 BHP
Maximum Power
300.0 bhp
Maximum Power
300 BHP
Rated Speed
1800-2200 rpm
Rated Speed
1800-2200 rpm

Emission Standards

Emissions
China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
Emissions
China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent

General

Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
110 mm (4.33 in)
Bore
110 mm (4.33 in)
Stroke
127 mm (5.0 in)
Stroke
127 mm (5.0 in)
Displacement
7.2 L (442 in³)
Aspiration
Turbocharged Aftercooled (TA)
Aspiration
Turbocharged Aftercooled (TA)
Displacement
7.2 L (442 in³)
Compression Ratio
16.2:1
Compression Ratio
16.2:1
Combustion System
Direct Injection
Combustion System
Direct Injection
Rotation (from flywheel end)
Counterclockwise
Rotation from Flywheel End
Counterclockwise

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
1053 mm (41.5 in)
Width
758 mm (29.8 in)
Height
1032 mm (40.6 in)
Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
588 kg (1296 lb)

Engine Dimensions - Approximate

Height
1032 mm (40.6 in)
Length
1053 mm (41.5 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
588 kg (1296 lb)
Width
758 mm (29.8 in)
  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels and Flywheel Housing
    • SAE No. 1 flywheel housing
  • Fuel System
    • HEUI injection
    • Fuel filter, secondary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request