Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Minimum Rating 225.0 bhp
Minimum Rating 225 BHP
Maximum Rating 275.0 bhp
Maximum Rating 275 BHP

Power Rating

Minimum Rating
225.0 bhp
Minimum Rating
225 BHP
Maximum Rating
275.0 bhp
Maximum Rating
275 BHP
Rated Speed
2200 rpm
Rated Speed
2200 rpm

Emission Standards

Emissions
China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
Emissions
China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent

General

Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
110 mm (4.33 in)
Bore
110 mm (4.33 in)
Stroke
127 mm (5.0 in)
Stroke
127 mm (5.0 in)
Displacement
7.2 L (442 in³)
Displacement
7.2 L (442 in³)
Aspiration
Turbocharged Aftercooled (TA)
Aspiration
Turbocharged Aftercooled (TA)
Compression Ratio
17:1
Compression Ratio
17:1
Rotation (from flywheel end)
Counterclockwise
Rotation from Flywheel End
Counterclockwise

Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

Length
2029.5 mm (79.9 in)
Width
974.8 mm (38.4 in)
Height
1986.3 mm (78.2 in)

Power Unit Dimensions - Approximate

Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
1250 kg (2756 lb)
Width
974.8 mm (38.4 in)
Height
1986.3 mm (78.2 in)
Length
2029.5 mm (79.9 in)
  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels and Flywheel Housing
    • SAE No. 1 flywheel housing
  • Fuel System
    • HEUI injection
    • Fuel filter, secondary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request