Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Minimum Rating 275.0 bhp
Minimum Rating 275 BHP
Maximum Rating 350.0 bhp
Maximum Rating 350 BHP

Power Rating

Minimum Rating
275.0 bhp
Minimum Rating
275 BHP
Maximum Rating
350.0 bhp
Maximum Rating
350 BHP
Rated Speed
1800-2200 rpm
Rated Speed
1800-2200 rpm

Emission Standards

Emissions
China Stage II, U.S. EPA Tier 2 Equivalent or U.S. EPA Tier 3 Equivalent, EU Stage II Equivalent or EU Stage IIIA Equivalent
Emissions
China Stage II, U.S. EPA Tier 2 Equivalent or U.S. EPA Tier 3 Equivalent, EU Stage II Equivalent or EU Stage IIIA Equivalent

General

Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
112 mm (4.41 in)
Bore
112 mm (4.41 in)
Stroke
149 mm (5.87 in)
Stroke
149 mm (5.87 in)
Displacement
8.8 L (537 in³)
Displacement
8.8 L (537 in³)
Aspiration
Turbocharged Aftercooled (TA)
Aspiration
Turbocharged Aftercooled (TA)
Compression Ratio
16.3:1
Compression Ratio
16.3:1
Rotation (from flywheel end)
Counterclockwise
Rotation from Flywheel End
Counterclockwise
Cooling System Capacity
44 L (46.5 qt)
Cooling System - Capacity
44 L (46.5 qt)
Lube System (refill)
32 L (33.8 qt)
Lube System - Refill
32 L (33.8 qt)

Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

Length
2174.4 mm (85.81 in)
Width
987.8 mm (38.89 in)
Height
2008.1 mm (79.06 in)

Power Unit Dimensions - Approximate

Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
1490 kg (3285 lb)
Width
987.8 mm (38.89 in)
Height
2008.1 mm (79.06 in)
Length
2174.4 mm (85.81 in)
  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels and Flywheel Housing
    • SAE No. 1 flywheel housing
  • Fuel System
    • HEUI injection
    • Fuel filter, secondary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request