Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Minimum Power 69.7 bhp
Minimum Power 69.7 BHP
Maximum Power 130.0 bhp
Maximum Power 130 BHP

Power Rating

Minimum Power
69.7 bhp
Minimum Power
69.7 BHP
Maximum Power
130.0 bhp
Maximum Power
130 BHP
Rated Speed
2200-2400 rpm
Rated Speed
2200-2400 rpm

Emission Standards

Emissions
U.S. EPA Tier 2 Equivalent, EU Stage II Equivalent
Emissions
U.S. EPA Tier 2 Equivalent, EU Stage II Equivalent

General

Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
Bore
105 mm (4.13 in)
Bore
105 mm (4.13 in)
Stroke
127 mm (5.0 in)
Stroke
127 mm (5.0 in)
Displacement
4.4 L (269 in³)
Aspiration
Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
Aspiration
Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
Displacement
4.4 L (269 in³)
Compression Ratio
16.2:1
Compression Ratio
16.2:1
Combustion System
Direct Injection
Combustion System
Direct Injection
Rotation (from flywheel end)
Counterclockwise
Rotation from Flywheel End
Counterclockwise
Lube System (refill)
11 L (11.6 qt)
Lube System - Refill
11 L (11.6 qt)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
663 mm (26.1 in)
Width
470-620 mm (18.5-24.4 in)
Height
775-810 mm (30.5-31.9 in)
Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
291-306 kg (640-674.6 lb)

Engine Dimensions - Approximate

Height
775-810 mm (30.5-31.9 in)
Length
663 mm (26.1 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
291-306 kg (640-674.6 lb)
Width
470-620 mm (18.5-24.4 in)
  • Air Inlet System
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator
    • Starter motor
    • Control Panel
    • Glow plug starting aid
  • Cooling System
    • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
    • 50:50 water glycol mix
  • Flywheels and Flywheel Housing
    • SAE No. 3 flywheel housing
    • Flywheel and starter rings
  • Fuel System
    • Fuel filter positions
  • Lube System
    • Lubricating oil filters and breathers
    • Oil filter positions
    • Lube oil sump
  • Power Take Off
    • SAE B Power Take Off (PTO)
  • General
    • Timing case and gear-driven auxiliaries
    • Belt-driven auxiliaries
    • Engine mountings
    • Gauges
    • Displays
    • Power and torque curve tailoring
    • Paint: Caterpillar yellow, with optional colors available at request