Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
3512E Tier 4 Land Electric Drive Drilling Engine Specifications
Minimum Rating 1476 BHP
Maximum Rating 1750 BHP
Aspiration Turbocharged-Aftercooled
Displacement 3596 in³

General Specifications

Minimum Rating
1476 BHP
Maximum Rating
1750 BHP
Aspiration
Turbocharged-Aftercooled
Displacement
3596 in³
Flywheel and Flywheel Housing
SAE No. 00
Stroke
8.5 in
Bore
6.7 in

Emissions

Emissions
U.S. EPA Tier 4 Final/CARB/EU Stage IV

Dimensions

Length
130.0 in.
Length
130 in
Width
72.0 in.
Width
72 in
Height
78.0 in.
Height
78 in
Weight
21602.0 lb
Weight
21602 lb
  • Aftertreatment Mounting
    • 2 CEM shipped loose
    • Requires customer support structure & mounting
  • Air Inlet System
    • Aftercooler core, corrosion resistant
    • Air cleaner, regular duty, dual element, no pre-cleaner
    • Service indicators
  • Control System
    • Cat ADEM A5 ECU – LH
    • Direct Rack 0-200 ma
  • Cooling System
    • Outlet controlled thermostat and housing
    • Jacket water pump, gear driven
    • Aftercooler fresh water cooling pump (SCAC), gear driven centrifugal
    • Remote radiator cooling - single water outlet
    • 141.5 mm I.D. (5.6 in), hose type connection
  • Exhaust System
    • Exhaust manifolds, dry
    • Dual turbochargers with w/c bearings
    • Exhaust dual turbine outlet
    • All engines shipped with flex pipe kit
  • Flywheels & Flywheel Housing
    • Flywheel & Flywheel housing, SAE No. 00
    • SAE Standard rotation
  • Fuel System
    • Low pressure fuel transfer pump
    • High pressure common rail fuel system
    • Electronically controlled unit injectors with individual fuel accumulators
    • Electric fuel priming pump with fuel/water separator, shipped loose
    • High pressure fuel pump with fuel control valve
    • Boosted primary fuel filters with fuel/water separator, shipped loose
  • Instrumentation
    • EMCP 4.4, shipped loose
    • Product Link engine monitoring
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil pan drain valve – 2" NPT female connection
    • Shallow oil pan
    • Spin on oil filter - RH
    • Shipped dry
  • Mounting System
    • Rails, mounting, floor type, 254 mm (10 in)
    • Power Take-Offs
    • Accessory drive
    • Lower LH front (available for PTO usage)
    • Front housing, two-sided
  • Protection System
    • ADEM A5 ECM system to provide customer programmable engine deration strategies to protect against adverse operating conditions. Includes single slide gate air inlet shutoff, activated on overspeed or emergency stop
  • Starting System
    • Prelube integrated starting system: - Air starting motor, RH, 620-1034 kPa (90-150 psi), LH - Integrated air silencer - Air prelube motor, RH
  • General
    • Paint - Cat yellow
    • Vibration damper and guard
    • Lifting eyes
  • Air Inlet System
    • Heavy-duty air cleaners (dual element with precleaners)
  • Charging System
    • 80 amp charging alternator
  • Cooling System
    • Caterpillar supplied radiator, 46/CVS-stacked, includes blower fan, fan drive, pulley, belt guard, regulator, fuel cooler
    • Single water outlet connection (for use with customer supplied radiator)
    • Coolant level sensor
    • Coolant conditioner
  • Exhaust System
    • Flex pipe kit
    • Residential mufflers (painted steel and stainless steel) with outlet elbow and rain cap
  • Instrumentation
    • Product Link
  • Lube System
    • Closed crankcase ventilation
    • Centrifugal oil filter
    • Oil level regulator
  • Protection System
    • Explosion relief valve
    • Metal particle detector
  • General
    • Coupling hub
    • Barring group
    • Jacket water heater 240-480 V