Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
Specification Summary
Maximum Rating 14040 kVA
Maximum Rating 14040 kV·A
Emissions IMO II/III
Emissions IMO II/III

Engine Specifications

Maximum Rating
14040 kVA
Maximum Rating
14040 kV·A
Emissions
IMO II/III
Emissions
IMO II/III
Aspiration
Turbocharged- Aftercooled
Engine Control
Electronic
Stroke
24.0 in
Bore
18.1 in
Displacement
74266 in3
Aspiration
Turbocharged- Aftercooled
Bore
18.1 in
Displacement
74266 in³
Engine Control
Electronic
Stroke
24 in

Dimensions

Height
301 in
Length
590 in
Width
150 in
Weight
550000 lbs
Height
301 in
Length
590 in
Weight
550000 lb
Width
150 in
  • Engine
    • Motor-driven barring gear, fitted on engine
    • Emergency shutdown equipment with push button for manual emergency stop
  • Cylinder Head
    • Fuel injector and integrated gas admission valve with easy service and maintenance access
    • Cylinder pressure sensors for highest operational reliability and efficiency, replacing conventional knocking sensor technology
    • Piston, rings and liners designed for operation on gas and liquid fuels
  • Turbocharger
    • Optimized engine efficiency in gas and diesel operation
    • Blow-off valve and waste gate technology for optimized air-fuel ratio control
  • Gas System
    • Double-walled gas piping to support an inherently safe engine room concept
    • Leakage detection
    • Gas valve unit
    • Segmented gas detection system on request
  • Micro Pilot Fuel Injection System
    • Gear driven high pressure fuel pump and filter system with easy service access
    • Reliability combined with service and maintenance simplicity, through individual ignition fuel injector and “in-cylinder head” integrated ignition fuel return pipes
  • Exhaust System
    • Front-mounted turbocharger at free end with transition nozzle (0 degrees from the vertical and away from engine), with compressor cleaning device
    • Expansion joint separate
    • Separate silencer and spark arrester
  • Fresh Cooling Water System
    • HT pump, fitted on engine
    • LT pump, separate, vertical design, electric motor driven
    • HT thermostat, remote-mounted, electric controlled
    • Cooling water preheating equipment, fitted on base frame
  • Lubricating Oil System
    • Safety filter fitted on engine
    • Force pump, fitted on engine
    • Pre-lubrication pump, fitted on base frame, electric motor driven
    • Automatic back-flushing filter
    • Duplex filter with differential pressure indication, fitted on engine
    • Pressure control valve, fitted on engine
    • Thermostat, remote-mounted, electric controlled
  • Connections
    • Set of connecting parts between flange coupling and flywheel
    • Flexible flange coupling between engine and generator
    • Base frame with flywheel guard and incorporating lube oil sump tank, for engine and generator
    • Mounting of engine and generator on the base frame
    • Set of bonded rubber rails for resilient mounting of the base frame
    • Set of flexible pipe connections
  • Instrumentation
    • Gauge board with liquid-dampened pressure gauges for: fuel, lubricating oil, fresh water, starting air and charge air.
    • On-engine thermometers for fuel, lubricating oil, fresh water and charge air
    • Electric remote speed indicator
    • Turbocharger and remote speed indicator
    • Exhaust gas temperature indicator
  • Monitoring
    • Manual control on engine, including: control panel with start/stop key, speed setting device, mechanical shutdown device, changeover of control functions from engine to remote control
    • Starting solenoid valve on engine, 24 V DC
    • Separate electronic speed governor