Chat with us, powered by LiveChat

Starting Small... Building Big! With Alban CAT Construction Equipment...

Learn More
C4.4 Well Servicing HazPak Specifications
Minimum Rating 52 BHP
Maximum Rating 151 BHP
Peak Torque - Speed 273 N•m (201 lb-ft) @ 1500 rpm
Displacement 265.5 in³

Package Specifications

Minimum Rating
52 BHP
Maximum Rating
151 BHP
Peak Torque - Speed
273 N•m (201 lb-ft) @ 1500 rpm
Displacement
265.5 in³
Aspiration
Naturally aspirated or turbocharged-aftercooled
Governor and Protection
Woodward
Weight - Net Dry - Approximate
2138 lb
Oil Change Interval
500
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE 3
Stroke
5 in
Bore
4.13 in
Emissions
U.S. EPA Marine Tier 2, CCNR Stage 2

Capacity for Liquids

Lube Oil System (refill)
7.4 qt
Lube Oil System - Refill
7.4 qt (US)
Cooling System
26.0 qt
Cooling System
26 qt (US)
  • Air Inlet System
    • ATEX designed and tested inlet system, compliant to EN 1834-1; stainless steel flame arrestor; integrated air shutdown valve, activates on overspeed and emergency stop; available in hydraulic, pneumatic, electric configurations; air cleaner, single element canister type with service indicator and rain cap; dry aluminum compressor housing
  • Cooling System
    • Closed cooling system with air blast radiator and charge air cooling, marine radiator with full solderdipped core, radiator cooled packages sized for 45°C ambient air temp, gear-driven centrifugal jacket water pump, de-aeration expansion tank, exhaust gas heat exchanger (cooler), additional heat load from exhaust heat exchanger included in cooling circuit
  • Exhaust System
    • ATEX designed and tested exhaust system, compliant to EN 1834-1; comprised of exhaust gas heat exchanger (cooler); stainless steel flame arrestor; stainless steel spark arrestor; water-cooled exhaust manifold, watercooled turbocharger
  • Fuel System
    • Mechanical fuel injection, primary fuel filter/water separator with 1/4” BSPP connectors (LH), secondary fuel filter (LH), fuel priming pump manual, fuel shutoff valve
  • General
    • Package ambient capability is -20°C to 45°C; mechanical systems are designed for Gas Group IIA; electrical systems are designed for Gas Group IIC; all systems meet temperature class T3 (200°C limit); includes a declaration of conformity for the entire package scope; radiator package, engine, and exhaust system fitted to sub-frame; air filter, fuel/water separator, remote oil filter installed and mounted; earth bonding per standard EN 60079-14
  • Lube System
    • Oil filter (LH), dipstick (LH), fs disposal (closed system)
  • Air Compressor
    • Single cylinder, 225 CC with head unloader
  • Charging System
    • 12V, 45A alternator with 75AH battery pack
    • 24V 16A alternator with 75AH battery pack
    • 24V 25A alternator with 75AH battery pack
  • Control System
    • Local panel at side of engine, includes: coolant temperature gauge, lube oil pressure gauge, exhaust gas temperature gauge, exhaust gas backpressure gauge, engine speed gauge, stop switch
  • Exhaust System
    • 18 dBA spark arrestor/muffler, ATEX approved
  • Fuel System
    • Fuel cooler, installed, maintains acceptable fuel temperature when running from day tank
  • Starting System
    • Air, electric, and hydraulic starters available